I need to format a column of numbers so that it will sort alphanumerically.
All the numbers have 4 digits, and some of them have an extra letter on the end eg A B C
How can I custom format the column so that I get the numbers in order and the letters in sequence with them?
I found out about conditional formatting for five different letters or letter combinations, using VBA, using the code below.
I was wondering if this is also possible with letters or letter combinations, BV, RV, SV, CV, Z and numbers, somewhere between 0 and 9,5.
I'm working on a function that will sum a row of cells containing letters and numbers. I am currently using :
=SUMPRODUCT((0&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(B5:S5,"T",""),"TP",""),"TPE",""),"P",""))+0) as my base.
Right now the formula will work with T, TP, and P; however as soon as I type TPE I get #value.
Either way you get the point of what I am trying to do, however my cells can contain any one of the following combinations:
T,TP,TPE
P,PE,
E
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View RelatedI have a column in one of my spreadsheets that I would like to split. There's currently not anything that can be used as a delimiter, nor can I use fixed width. the cells in question start with numbers and end with letters.
View 7 Replies View RelatedI have an excel sheet here with the data as
1.0 Develop Vision and Strategy
1.1 Define the business concept and long-term vision
1.1.1 Assess the external environment
1.1.1.1 Analyze and evaluate competition
1.1.1.2 Identify economic trends
1.1.1.3 Identify political and regulatory issues
1.1.1.4 Assess new technology innovations
1.1.1.5 Analyze demographics
.... etc
I need to split this into two columns column A should contain 1.0 and column B should contain Develop Vision and Strategy . Ex: 1.1.1.2 Identify economic trends in column A then column B - 1.1.1.2 column C - Identify economic trends.
I have a sheet with part numbers, costs and wish to add varying number to the cost in each row, based on a certain aspect of the part number:
A
B
C
[Code].....
In the example, 01/1X/2X/3X are the differentiating aspects of the part number. To rows in column A containing 01 (preceding the dash) I want to add nothing, 1X+.75,2X+1.5,3X+9.
I have researched the nested IF formula and can use it in a test as long as column A contains either numbers or letters. The problem I have is because there is both numbers and letters, the logical argument won't validate "if true". Here is my formula (omitting my attempts with parenthesis etc. around the letter in the logical argument):
=IF(IF(A1=1X,B1+.75,IF(A1=2X,B1+1.5,IF(A1=3X,B1+9,B1)))
I have 7 cells containing strings but not numbers on a row.
Now I want to list out all the combinations of drawing out 3 cells out of these 7 cells while the remaining cells that haven't been drawn out could also be listed out one column next to the drawn cells.
For example, I got 7 cells like this.
A B C D E F G (each letter in ONE cell)
And I want to list out all the combinations like this:
ABC DEFG
ABD CEFG
ABE CDFG
ABF CDEG
etc.
For more details, please refer to the attached sample (an .xls file being zipped).
I have column of cells containing entries such as V1, V3 and V7. I'm trying (and failing) to come up with a formula to separate the numbers from the letters and add them together: V1, V3 and V7 would together give 11.
I can use the MID worksheet function to separate my numbers from my letters on a row-by-row basis, but I can't work out how to do the whole thing in one fell swoop. =SUM(MID(A1:A10,2,2)) doesn't work, for example.
i have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
Using the following data
R10-12128
R11-12x12x8
R11-12x12x8
R1-12x12x8
R1-12x12x8
R12-12x12x8
R14-12x12x8
R16-12x12x8
R18-12x12x8
R2-12x12x8
I want it to sort like this:
R1-12x12x8
R1-12x12x8
R2-12x12x8
R10-12128
R11-12x12x8
R11-12x12x8
R12-12x12x8
R14-12x12x8
R16-12x12x8
R18-12x12x8
What is the formula to achieve this?
I have a spreadsheet wtih a number of rows that contain answers to different criertia in each column.
The row may therefore have cells that either have numbers or letters.
Column A will be the title of the row.
I want to write a function to find the average value of the numbers in any row with title 'x'.
So it would look down column A, and look for those called 'x', and then average all the numbers across all those rows.
I have tried to use =averageif, but I think the fact there are letters in the cells being assessed (which I just want to be ignored) creates an error.
I have a table of data in which a lot of data appears as " "999" Then 'fix this, not working, formats numbers with decimals as whole numbers
c.NumberFormat = "#,##0 "
End If
' now format to line up right justified
[Code].....
I have one cell with $20,000 hard coded (cell A1). In another cell I want the cell to say "20,000 Capital Raise" (cell B1). And i want B1 to link to A1 so that if i change the number in A1 it will also change in B1.
Here's what i have in B1 so far: ="$"&J6&" Capital Raise"
This produces "$20000 Capital Raise" in cell B1.
So the only thing i'm trying to figure out is how to get the comma in the $20,000 so it will read "$20,000" instead of "$20000".
About conditional Formatting and relative referencing.
I need to change the colours of the cells depending if the pupil is meeting, over or under acheiving thier target grades.
I've got as far as highlighting the grades and using the formula in conditional formatting =ISTEXT(C7:C14) to display if the pupil is meeting their target grade.
I am aware that i will need to use relative referencing but am unsure how.
Its quite mind boggling to find out a way to see if they are over aceiving/under acheiving.
Tallying entires from a PDF into excel. Such that
c=1000
d=15000
e=50000
f=100000
g=250000
h=500000
i=1000000
j=5000000
k=2500000
l=50000000
In a cell I would like to type =c+d+c for example and have it say 17,000 rather then me having to type in =1000+15000+1000.
I created this data worksheet with many tabs and multiple users. On the main tab, something weird has happened and I have no clue how it happened or how to fix it....
View 5 Replies View RelatedThis formula will add up the letters D,N,H with one value
Like =SUM(COUNTIF(B4:AZ4,{"D","N","H"}))*12 will =36
How can I add bN =17 bmN =19 bD=24
=SUM(COUNTIF(B4:AZ4,{"bN","bmN","bD"})) to add up to 60
I just want to conditionally format some columns with different colours. The problem is that I have some cells that have the value 'a' and others that have 'A'. These should be different colours, but I can't seem to get Excel to detect between the two forms.
View 9 Replies View RelatedIn column A I have the following numbers
13710
14782H
9827
14782
14206B
a formula that looks at this range of cells and returns only the cells that have a letter at the end. The letter range goes A to M
I am a school teacher trying to adjust my tracking sheet to calculate pupils levels. I am looking for 2 potential formulas that will do the following.
1 - In cell AE I would like to generate a formula that will take the data entered in cells J:5, L:5, N:5, P:5, R:5, T:5, V:5, X:5, Z:5, AB:5 and AD:5 and give an average level.
2 - In cell AH is it possible to generate a formula that will calculate how many levels of progress the pupils are making - In other words I need Cell I to be calculated against cell J to see how much progress the pupils are making - for example if in cell I:5, a pupil is was given a 3a, and then in cell J:5 is given a 4b, they will have made 2 sub levels of progress. As well as this, can that progress then be averaged out across cells I:5, K:5, L:5, M:5, O:5, Q:5, S:5, U:5, W:5, Y:5, AA:5 and AC:5 to give an overall number of of levels of progress? An then..... can I colour co-ordinate the cell so that if the pupils are making 3 or more sub levels of progress it turns green, 2 sub levels orange and 1 sub level red?
Levels work like this
3c
3b
3a
4c
4b
4a
5c
5b
5a and so on
i want to convert numbers to letters in the excel Sheet
I.E: when the number is 1000.00$ it write in another cell
on thousand dollar only
1500.00$ one thousand five hundred dollar only
I have a word, for example ROCK. I asigned numbers to the word. R=1,O=2,C=3,K=4. My Question: If I type in ROC it must return 123. If I type in KR it must return 41, etc. Is there a basic formula I can use to solve this?
View 4 Replies View RelatedHow do I do data validation/cell formatting so that only alphabetic characters can be entered and no numbers?
(We use the cell for First Name, Last Name, etc. and I don't want potential entries like Mr. 56565 55454 because the cells are formatted as text and allow alphabet and numbers.)
I tried =NOT(ISNUMBER(H6)) for Data Validation, but that didn't work.
??
VR/Lost
I have in cell A1 the number 2 and in cell A2 the letter m.I want to add these two cells in cell A3 so as to appear 2+m.So i type in cell A3 =A1+A2 but it appears error.Is there a way to do what i am asking?
View 3 Replies View RelatedHow to autofill numbers with letters in excel 2007. Eg. 74cm, 80cm so on....?
View 4 Replies View RelatedIs there any formula or macro which gives the result from numbers to letters..? say like; 2,471,803.40 is in number and I'm looking for the result as 'RUPEE TWO MILLION FOUR HUNDRED SEVENTY ONE THOUSAND EIGHT HUNDRED THREE AND FORTY PAISE ONLY'. Is it possible to create macro to get this type of result..?
View 9 Replies View RelatedWe are doing a database conversion and I have been tasked with converting all our old promotion codes to a new system. The long and the short of it is this:
I am trying to write an equation that will look at two cells (say A1 & B1) which when put together could be one of the following numbers (01,02,03,04,05,06,07,08,09,10,11,12) and translate them to a letter (A,B,C,D,E,F,G,H,J,K,M,N)
So 01=A, 02=B and so on...
I was trying to use if statements, but there are too many.
I have a list I want to sort containing both letters and numbers. Right now the regular sort sorts like this
ABC-1
ABC-11
ABC-12
ABC-2
I want it to sort like this and don't have a clue how to do it
ABC-1
ABC-2
ABC-11
ABC-12
I am using excel 2003