I have a table of data in which a lot of data appears as " "999" Then 'fix this, not working, formats numbers with decimals as whole numbers
c.NumberFormat = "#,##0 "
End If
' now format to line up right justified
[Code].....
I have one cell with $20,000 hard coded (cell A1). In another cell I want the cell to say "20,000 Capital Raise" (cell B1). And i want B1 to link to A1 so that if i change the number in A1 it will also change in B1.
Here's what i have in B1 so far: ="$"&J6&" Capital Raise"
This produces "$20000 Capital Raise" in cell B1.
So the only thing i'm trying to figure out is how to get the comma in the $20,000 so it will read "$20,000" instead of "$20000".
I am extracting data from a website to excel 2010. my problem is the data contains both text, numbers, and sometimes a combination of both.
e.g. hi im ron for more information you can reach me at 6 five 6 four 5 seven 7 three 2 two..
I need it to look like this 6564577322 or 7 * 0 * 2 * 4 * 5 * 6 * 8 * 6 * 2 * 1...i need to look look the same
How do i first format the numbers written in text into numbers and then show only the numbers in a cell minus the text?
I have a column that looks like the following and I need to add the numbers:
27 skids
31 skids
56 skids
13 skids
The unit "skids" is constant. The answer I am looking for is "127" or "127 skids"
I'm designing a spreadsheet for our department which tracks a students progress throughout their time at the school. There are 4 levelsStatementSchool Action PlusSchool ActionMonitorIn year 7, they may come into our school at Monitor level, but when they get to year 8 they may have moved to Action Plus. I want to highlight that change on my spreadsheet with conditional formatting if possible so if they go up, the cell will turn red, if they move down the list the cell will turn green.
I've created two columns on an options sheet (which holds all my data validation lists) and assigned a number to each of the levels so i can conditionally format my columns using < and > but I don't know how to write the lookup formula
What I'm trying to achieve
ExcelHelp.jpg
My Options sheet
Excelhelp2.jpg
A
B
C
D
E
F
G
23445566894 Brwn pdc aft
Cat1
45687930596
$5
45687930596 Gld wdget adi
Cat2
23445566894
$6
In the example above, I would like to do a vlookup in column C that matches the digits in column A to those in column F, with the output being the corresponding value in column G. I believe it involves the left function but not sure how to really use it here.
I need to format a column of numbers so that it will sort alphanumerically.
All the numbers have 4 digits, and some of them have an extra letter on the end eg A B C
How can I custom format the column so that I get the numbers in order and the letters in sequence with them?
I generated my urls to online photos, I referenced cells where some are only numerical (ex. 479) while others contain a numerical/text mix (ex. 3014-RACK). Here is my url code in excel...
View 10 Replies View RelatedIs there a way to set up a conditional format for several cells so that the cells are filled in with red until the user enters text in those cells??
View 5 Replies View RelatedWhat I am looking to do is;
If cell A2 = "Closed"
then I want cells B2 and C2 to strike through its own text.
I.E.
A2= anything other than "Closed"
then B2 and C2 = Blah blah blah
but if
A2 = Closed
then B2 and C2 = Blah blah blah
I have a spreadsheet where i do need to count cells values that are formatted as text but i do need to ignore the real text in some cells, in this formula i do need to add values depending of the adjacent cell.
I have attached a example : New Microsoft Excel Worksheet.xlsx
I'm trying to sum up a column of cells which have both text with and without strikethrough formatting. I've looked around and got some VB codes but it doesn't work for me.
I still get the annoying #NAME? error. It did work initially but after moving the file to another computer it just became #NAME? again.
I want to conditional format based on all of the following cells contain the same text as AT19 or not.
A19 H19 O19 V19 AC19 AJ19
What is my formula?
I'm trying to create a conditional format that formats only cells that do not contain one of the names from a range of cells.
For example:
Cell O2 contains Florida
Cell O3 contains Texas
Cell range W1:W2
W1 = Florida
W2 = Arizona
In this example I want Texas to have a strikethrough, but Florida to be unchanged since Texas is not included in the list.
I keep getting an error when I try to do a format of text that does not contain =W1:W2.
I have cells with '1 hour' , '5 hours' , '2.5 hours'.
All I want to do is add the numbers and ignore the text.
I need a formula for conditional formatting which highlights a row if A has the text "Ex" and B has "Paid".
View 2 Replies View RelatedI am working on the monthly duty roster that is attached. I have the cells at the bottom configured to total how many early shifts, late shifts and off days each Trooper has. My problem is that I often need to add text to show what type of leave is being taken, or numbers to correspond to the special notes section numbered 1-24, and so on.
Is there any way to use conditional formatting to do this so that the totals at the bottom still sum correctly? Badge numbers are used to identify each Trooper. I have included them at the top for reference. The reason that I referenced them to total by cell instead of individual badge numbers is that I am attempting to format this so that any badge numbers can be entered at the top. This form will be used by other groups of Troopers if I can get it to work.
I have a cell with some text in it that has formatting applied (bold in this case). I want to append some text on the end using VBA, but preserve the existing font formatting information. So say I have "one bold one" in my cell, I'm executing the following: ActiveCell.Value = ActiveCell.Value & "two"
But this wipes out the bold information. Is there any way of preserving the bold that's already in the cell. Either perhaps by copying the Characters object and reapplying it, or by some other method?
I have a spreadsheet which reads:
A1 E012345678
A2 126789433
A3 ABCDEFGH
A4 CDEEGFFH
A5 E0456783
A6 98765432
etc.
I need only the the data in Cells A1 A5 etc. which means the 3 cells below (A2, A3, A4 ) should be deleted. A5 I need the data, and then A6, A7, A8 I do not need ... A9 need and so on.
the data should be in in one below the next with no spaces in between.
Data is only in column A.
I have cell A1:A25. each with a number, and the same text "Hour(s)" So cell A1 would be 24 Hour(s) and so forth down to cell A25.
Due to the sheet being large, I can't just insert another column to list the text. I need for cell A26 to sum the numbers ignoring the test in the cells. I searched to forum, but didn't exactly find anything that works correct.
I want to separate the text and numbers into two different cells. Basically, I have the entire drawing details in one cell and I need to split it up, e.g. I have:
KEEP PLATE 902 4 0002
STOOL 525 4 0199
PACK PLATE 525 4 0200
PACK PLATE 525 4 0201
PACK PLATE 525 4 0202
I do my indoor cricket team stats and I am having some trouble figuring out what formula to use in order to be able to sum a row of numbers where some cells may contain text and numbers or just text.
Please see the attached spreadsheet to understand what I'm talking about.
In the batting tab, when the batter gets out, they lose 5 runs. Outs are noted by St, R, B or C. In terms of runs, the scorers put wides and noballs to the batter on strike which are noted by W or N and this is worth 2 runs. Sometimes the batter on strike will get runs off a W or N so it's noted down as W+2 (which would give 4 runs) etc. So what I need to be able to do in the batting sheet is sum the total runs and count the number of outs.
In the bowling sheet, it's the same story as the batting tab, but I also need to be able to sum the number of extras given and count the number of wickets taken.
[URL].....
How can I sum all the values in a range of cells where the cells contain either a number or text and a number. Please note the following example?
C17=9
D17=4
E17=8TD
F17=3TP
G17=7
I want the total of 31 but excel will ignore the cells with text.
I have the following scenario
A1 - 0.50
A2 -
I have a bunch of cells that have City and Zip Code combinations.
Ex: Chicago 606
Fayettville 72701
SACRAMENTO 95691
Some of them are 3 digit zips and others are 5 digits. I just want to weed out anything with a number leaving the city names.
I have copied information from an outside source to Excel. Unfortunately, the information includes numbers preceding the text which I need to delete for all records. Is there an easier way of deleting this information without going to each individual cell to delete the numbers
View 9 Replies View Relatedway to remove text from cells that should only contain numbers.
Example: 124 fcm 12 std
I have the data below, there is alot more but I'll just be specific and i'll expand it myself to include the rest that I need.
I want to do sumif if in Column A that is between range R10 and R99, but I cannot figure out how to get the formula to work right since I have text instead of numbers. Also some of the other sumif's i need to do have only letters (for ex. RAA to RAZ or RDA to RDZ).
...
R1021
R1417
R1519
R187
R20131
R249
R2514
R2811
...
I have a range of cells with numeric values or blanks. I set up a Conditional Formatting rule with this range selected: New Rule > Format only cells that contain > Format only cells with: Blanks; then I set the formatting to a light green fill and on the Number tab > Category = Custom > Type: "blank"
The blank fields get the light green fill, but no text; that is, the value displayed is still blank.
I go back to edit the CF rule and change Blanks to No Blanks. The results are what I expect: the cells with numbers display the text blank and have a green fill; the blank cells have no fill (white).
This is my testing criteria. I eventually want the empty cells to display 0 (zero). I tried setting Custom > Type: 0 (the number placeholder zero) and Type: "0" (literally the number zero), and neither works.
I have tried this with Format only cells with Cell Value equal to [the address of a blank cell].
I tried to set the value as "" but kept getting =""""; and ="" became ="=""" ???
I have tried this with Use a Formula... using the len()=0, isblank(), and other approaches, all with the same results.
I also made sure the option [x] Show a zero in cells that have a zero value is checked.
With all approaches to identifying the blank cells, they ARE obviously being recognized as blank values: the fill color is being applied to the right cells; and when Not Blank is the criterion (or a negation of a formula), the blank ones are not formatted. But blank cells will not display the text as defined in the Custom Formatting.
And this isn't an issue of "If the cell displays 'blank' it's no longer blank, so the rule doesn't apply" - HERE'S WHY: I set up a second CF rule that sets the Font to red when the value is greater than zero and had this CF rule follow the CF rule for No Blanks (the test above that works). Cells with positive numbers displayed blank in red, cells with zeros or negative numbers displayed blank in black. This clarified that the actual value of the cell is being evaluated, not the displayed value after Custom formatting is applied.
How to colour cells depending on text in other cells, for example,
I would like cells D26:AA26 to turn light red if the letters 'FSM' are in cell 'E26' even if other text appears in it, eg 'SA+/FSM'
I have been playing about with conditional formatting but can seem to solve the mixed text issue?
I have included an example below,
Do you use a "*FSM*" around the formula?
[URL] ...........