Formula For A Letter Typed
Mar 23, 2007
I am trying to make a puzzle and use excel to verify I have done it correctly.
What I want to do is when I type a letter in a specific cell have it put a number value in another cell automatically. For instance, if I type the letter "a" in cell A1 I would like the number 60 to populate automatically in cell B1. I want to give each letter in the alphabet a numeric value so I can type a message in the A column and then auto sum the results of the numbers in the B column.
View 10 Replies
ADVERTISEMENT
Jan 10, 2007
From VBA code - I need to be able to populate a list box with a assortment of city names, (>200 entries), and be able to start the city selection with an alphanumeric “hot” key in the pick box – i.e. – when the user enters an “S” – the list box data jumps down to the start of all of the cities beginning with “S” – etc.
(I can populate the list box) – it is the alpha selection code that is kicking my butt.
View 2 Replies
View Related
Jan 26, 2009
I am getting the 'the formula you typed contains an error" ....
View 9 Replies
View Related
Apr 9, 2008
I want to set up a sheet macro that will replace the contents of a cell (when a specific number is typed in) with a specific formula.
For instance, when "43" is typed into any cell within specified columns (say columns C and H), it changes to the following formula: =IF(D47="",43,IF(D47<=3030,408,43))(WHERE D47 WOULD REPRESENT THE CELL ADJACENT TO THE CELL WHERE "43" WAS TYPED.)
IE:
If "43" was typed into cell C1, then it would change to the formula: =IF(D1="",43,IF(D1<=3030,408,43))
If "43" was typed into cell C50, then it would change to the formula: =IF(D50="",43,IF(D50<=3030,408,43))
View 12 Replies
View Related
Mar 12, 2009
I have 2 cells, one has a first name the other has a last name for instance:
A1 = Joe
B1 = Smith
I am trying to combine the first letter of the name in A1 with the next 3 letters in B1 so that C1 = jsmi
View 2 Replies
View Related
Mar 2, 2009
When I type a single lower case letter into a cell, what formula or conditional formatting should I use to always convert it to a capital letter automatically?
View 9 Replies
View Related
Dec 31, 2009
For the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
View 9 Replies
View Related
Oct 4, 2012
I am trying to make a formula which will tell me if A1 is a postcode (a letter and a number e.g CV42 6AQ)
In the A column, it looks like this:
CV42 6AQ
FC45 D4D
West yorkshire
PR42 6RD
Etc.
i want it to identify all the postcodes, and NOT "West Yorkshire" because it does not contain a number.
View 3 Replies
View Related
Apr 11, 2014
I have a column with names, where i need the 1st letters of the Names to be displayed in CAPS. If its a Single letter also, the same should be displayed in CAPS
View 2 Replies
View Related
Dec 29, 2011
I was wondering whether it is possible to find a formula in Excel that would extract (using RIGHT formula) surname from Name Surname cell despite surname lenght i.e.:
'John Smith' in one cell would give 'Smith' in the other
'Tom Let' in one cell would give 'Let' in the other
I have tried to combine RIGHT, FIND and PROPER (for upper case) in one formula but it does not work.
View 2 Replies
View Related
Jan 25, 2009
how it would be possible to obtain the last two numbers before the letter B, if "Fri Aug 01 16:40:49 BST 2008" is placed in A1 so "49" would be placed in B1,
View 9 Replies
View Related
Oct 29, 2006
I want to put the letter A in cell a1(or any cell in column A, SHEET1) of SHEET 1 and get the information from SHEET 2, column A. Put this information in column B sheet 1. I will have about 40 columns in sheet 2. I used a if formula, but only 8 ifs can be used.
View 9 Replies
View Related
Mar 7, 2014
I need to change a few hundred cells (one column) where the first letter may be a capital letter to a lowercase letter.
So:
GetAwardfromBid to getAwardFromBid
or
SmallLertter to smallLetter
View 3 Replies
View Related
Mar 3, 2014
I'm trying to set a data validation in B1 from values in A1:A5.
A1: Car
A2: Papers
A3: Pencil
A4: Pants
A5: Shoes
What I want is show in dropdown list the words in singular (without the "s" at the end).
The formula below works if I introduce it in a normal cell,
[Code]....
or as array formula with CRTL+SHIFT+ENTER in this way
[Code] .....
But I get the message that the formula has error when I introduce any of both in "Validation Criteria"-->Allow "List"-->Source.
View 7 Replies
View Related
Dec 23, 2009
Is there a function that will output the column letter? For example there's one I know of: =COLUMN(), which outputs column number, but not the letter. And if not, can a formula be written to output it without converting the spreadsheet to R1C1 style or using the lookup function that refers to a separate table within the spreadsheet?
View 3 Replies
View Related
Jun 7, 2009
I just want to show a letter and change it to any letter and show it again in seconds. Can it be done with formula, maybe with RAND formula or any other formula.
for example when i press F9 the letter A change B, and then i press F9, it changed to C, and then when i press F9 and it changed to A again, and i press F9 and it changed to B, and so on...
(Is it possible too..with a little variation if i press F9 continually, it changed every 5 second?)
View 9 Replies
View Related
Apr 4, 2009
I have the following letters in cells
D2= A
D3=G
D4 =L
These represent Accomodation,Groceries, and Liquor.
Starting at E12 I want a formula , to drag down the column, which will show either Accomodation, Groceries or Liquor depending on the letter I put in cell D12,
Eventually I will possibly need help to summarise these costs on another sheet with other data such as fuel costs and fuel analysis but this will get me started.
View 9 Replies
View Related
Oct 15, 2009
Well following on from my question earlier, I am still playing with my timesheet/rota I'm developing.
I have a start time and an end time, which is formatted as hh:mm then an hours cell which adds them up for you.
BUT if someone is on a rest day or a holiday day or a sick day etc, I would like them to be able to type that in without the cell that adds the hours up going doo laly!!!!! (######)
So, is there anyway they can type say 'R' and then getting the hours total cell to ignore it because it isn't a time?
View 4 Replies
View Related
Dec 30, 2009
i want to fill down a column and instead of my formula changing from A6 to A7 i want it to change to B6.
View 9 Replies
View Related
Mar 27, 2014
I have 1200 doctor/patient records to input into an excel spreadsheet for import to an online EHR database. I can set up all the normal formulas and formatting but for the life of me not figure out how to create a custom formula to take the first letter of the patient first name and last name and add 6 figures to create a unique patient identifier.
ie. James + Smith+ random 6 figures = JS245318.
In my spreadsheet the first name is under Column 1, Last name Column 3 and the unique number generated in column 4.
View 10 Replies
View Related
Jun 15, 2009
I have some delivery ratings from suppliers, and I want to assign a specific letter to each rating, depending of the obtained number. Criteria is:.........
View 4 Replies
View Related
Oct 3, 2006
Need to write a formula that would assign a letter grade (in row W) to the average in row V, based on the school's scale. So, row V contains my averages (in % form) and I want row W to have the letter equivalents.
93+=A
85-92=B
75-84=C
67-74=D
<66=F
View 2 Replies
View Related
Mar 6, 2014
I'm currently building a large spreadsheet which will require numeric codes to be within certain cells. At present these cells are filled with alphabetical codes and the person using them has little knowledge of the numbers, is there a simple way for them to type in the alphabetical code and it to then auto-replace it with the numberical?
View 8 Replies
View Related
Feb 2, 2012
Is there a formula that can sum only when i am typing numbers on a cell, but only when i enter new data to double check my quantities.
View 5 Replies
View Related
May 3, 2014
Is there a way to imitate the search box in access where it highlights any matching text in the entire database. BUT, instead of hitting the next arrow to go to the next matching thing, I want it to simply hide all rows that contain nothing that matches. I don't want it to just hide them though, I want them to be shown from the topmost cell down rather than simply hiding cells and having a ton of gaps to look through. If this can be done in access then that will work as well.
View 1 Replies
View Related
Oct 27, 2008
I was wondering if there would be a way to use vlookup and still be able to type text in the same cell. For example, if the vlookup gives me a result of 123. I want it to also pull from a different cell that I've typed in 321. So the resulting cell would show 321-123 or 321 123. I have attached a sample sheet. On sheet two where the 3 items are, I want it to display 321-123 for item 1, 321-234 for item 2, and 321-345 for item 3. The 321 would be dependant on what I type into B1 on the first sheet.
View 2 Replies
View Related
May 23, 2007
I am using strongly typed code, but I am also pulling data from worksheets into variants. e.g.
Dim MyArray As Variant
MyArray = [MyNamedRange]
is there any shortcut to convert the variant to a typed array, which doesn't just involve looping throught the variant and using a casting function, e.g.
Dim MyArray As Variant
Dim typedArray() As type
MyArray = [MyNamedRange]
typedArray = shortcut(MyArray)
View 4 Replies
View Related
Mar 27, 2013
Can I have a picture appear next to what is typed in the cell next to it. I have a drop down list of the different pictures I have, I want to select, for example, "star" from the drop down list, can I have a picture of the star appear in cell next to it? I have all the pictures of the words in my drop down list.
View 1 Replies
View Related
May 10, 2014
I have a list of drugs which possibly could increase to thousands in rows. I will need a macro that can scroll down to a particular row when the text in that row has been entered.
Assuming I have LOTEMP in A5000 , I would want a macro to scroll to row 5000 when the word , " LOTEMP" is typed in cell , say B2.
View 2 Replies
View Related
Jan 3, 2013
it is possible to have a drop down list (Cell A1) where you can type in the first few letters of a word and have the drop down list go to the the words that begin with those first few letters (searching in column 10) instead of having to scroll down the entire list to find the word / item you are looking for.
I ask since the drop down list may end up having up to 1000 words in it.
View 1 Replies
View Related
