Sum Only When Numbers Typed In Cell
Feb 2, 2012Is there a formula that can sum only when i am typing numbers on a cell, but only when i enter new data to double check my quantities.
View 5 RepliesIs there a formula that can sum only when i am typing numbers on a cell, but only when i enter new data to double check my quantities.
View 5 RepliesSee the attached excel table. I need the cell E4 to keep adding the values typed in the cell D4 on daily basis.The cumulative shouldn't be changed if there is no value in the cell D4. E4 should accumulate and keep the totals typed in D4...
Cumulative Input.xlsx‎
I was wondering if there would be a way to use vlookup and still be able to type text in the same cell. For example, if the vlookup gives me a result of 123. I want it to also pull from a different cell that I've typed in 321. So the resulting cell would show 321-123 or 321 123. I have attached a sample sheet. On sheet two where the 3 items are, I want it to display 321-123 for item 1, 321-234 for item 2, and 321-345 for item 3. The 321 would be dependant on what I type into B1 on the first sheet.
View 2 Replies View RelatedCan I have a picture appear next to what is typed in the cell next to it. I have a drop down list of the different pictures I have, I want to select, for example, "star" from the drop down list, can I have a picture of the star appear in cell next to it? I have all the pictures of the words in my drop down list.
View 1 Replies View RelatedI have a list of drugs which possibly could increase to thousands in rows. I will need a macro that can scroll down to a particular row when the text in that row has been entered.
Assuming I have LOTEMP in A5000 , I would want a macro to scroll to row 5000 when the word , " LOTEMP" is typed in cell , say B2.
I have a worksheet and in two of the cells I have text. In another cell I want to put a formula in so that if certain text is typed into each of the two cells a result will appear in the third cell.
Hazardous
Smiths
60%
Non Hazardous
Smiths
20%
Hazardous
Browns
45%
Can I put a formula in and if so, what formula would it be?
I want to set up a sheet macro that will replace the contents of a cell (when a specific number is typed in) with a specific formula.
For instance, when "43" is typed into any cell within specified columns (say columns C and H), it changes to the following formula: =IF(D47="",43,IF(D47<=3030,408,43))(WHERE D47 WOULD REPRESENT THE CELL ADJACENT TO THE CELL WHERE "43" WAS TYPED.)
IE:
If "43" was typed into cell C1, then it would change to the formula: =IF(D1="",43,IF(D1<=3030,408,43))
If "43" was typed into cell C50, then it would change to the formula: =IF(D50="",43,IF(D50<=3030,408,43))
I need it to be like:
=B10 2014
(So the first part changes depending on what B10 is but the 2014 always stays)?
I'm working on a timetable for my boss and i'm trying figure out how to have vba detect when a specific set of cells gets an x typed into it and calculate 1 cell = 36.50 hours and input into the appropriate Sum column. The Sum Total is Column AR and i've put x's into some of the cells that will be containing them, i'm sure if i just get the basic code needed i will be able to implement it.
View 5 Replies View Relatedis there a formula which can locate instances of same text even though due to spaces it may look different? for example, "bad apple" and "badapple" are essentially the same.
View 2 Replies View RelatedPls refer the attached excel work sheet.
My requirement is: values being typed in M31 and onwards to be also appeared in M11 and onwards without re typing them in M row.
Team(A)01.xls‎
Is there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?
This has seemed to have happened on a computer at work.
In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"
If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.
I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4
I'm currently building a large spreadsheet which will require numeric codes to be within certain cells. At present these cells are filled with alphabetical codes and the person using them has little knowledge of the numbers, is there a simple way for them to type in the alphabetical code and it to then auto-replace it with the numberical?
View 8 Replies View RelatedI am trying to make a puzzle and use excel to verify I have done it correctly.
What I want to do is when I type a letter in a specific cell have it put a number value in another cell automatically. For instance, if I type the letter "a" in cell A1 I would like the number 60 to populate automatically in cell B1. I want to give each letter in the alphabet a numeric value so I can type a message in the A column and then auto sum the results of the numbers in the B column.
I am getting the 'the formula you typed contains an error" ....
View 9 Replies View RelatedIs there a way to imitate the search box in access where it highlights any matching text in the entire database. BUT, instead of hitting the next arrow to go to the next matching thing, I want it to simply hide all rows that contain nothing that matches. I don't want it to just hide them though, I want them to be shown from the topmost cell down rather than simply hiding cells and having a ton of gaps to look through. If this can be done in access then that will work as well.
View 1 Replies View RelatedI am using strongly typed code, but I am also pulling data from worksheets into variants. e.g.
Dim MyArray As Variant
MyArray = [MyNamedRange]
is there any shortcut to convert the variant to a typed array, which doesn't just involve looping throught the variant and using a casting function, e.g.
Dim MyArray As Variant
Dim typedArray() As type
MyArray = [MyNamedRange]
typedArray = shortcut(MyArray)
it is possible to have a drop down list (Cell A1) where you can type in the first few letters of a word and have the drop down list go to the the words that begin with those first few letters (searching in column 10) instead of having to scroll down the entire list to find the word / item you are looking for.
I ask since the drop down list may end up having up to 1000 words in it.
I have the following code that should pop up a message when column E is left blank when "other" is typed into column D. But I cannot get it to work.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range, LastRow As Range
Dim x As Integer
If Target.Count > 1 Then Exit Sub
Set rng = Range("F:F")
If Intersect(Target, rng) Is Nothing Then Exit Sub
If Target = "" Then
For x = 1 To 5000
If Cells(x, 4).Value = "Other" And Cells(x, 5).Value = "" Then
Answer = MsgBox("If other, please state", vbOKCancel, "CONFIRMATION")
End If
Next x
End If
End Sub
I am trying to have one sheet with company names on it and another as a schedule. I have about 20 companies that I need to list on the main schedule sheet. Is there anyway when I type a company name in one sheet, when it copies that cell to the schedule sheet, format that cell to a specified format? I know conditional formatting will work, but it only allows 3. I need around 20. I would just like to change the background color of that cell when the name is typed in.
View 9 Replies View RelatedFrom VBA code - I need to be able to populate a list box with a assortment of city names, (>200 entries), and be able to start the city selection with an alphanumeric “hot” key in the pick box – i.e. – when the user enters an “S” – the list box data jumps down to the start of all of the cities beginning with “S” – etc.
(I can populate the list box) – it is the alpha selection code that is kicking my butt.
HOw do we hard code excel to show when number typed as with the 1000 separator.
For Eg: 1,000
I have set up a spreadsheet to calculate time as followed:
A1 - Start Time
B1 - Finish Time
A2 - Hours Worked:
=IF(B1<A1,B1+1,B1)-A1
C1 - Start Time
B1 - Finish Time
C2 - Hours Worked:
=IF(D1<C1,D1+1,D1)-C1
and so on.........
upon opening my spreadsheet which will only open if the correct answer/ password is typed.
I’d need to store the questions, passwords/ answers somewhere for VB to look up I guess??
Capital of England – London
Capital of France – Paris
Capital of Italy – Rome
Etc etc
And then I need coding which will open one of the random questions, which will only grant access to the spreadsheet if the correct answer is typed.
have a formula or something along those lines that will look for the data you type in to the selected cell and will show you on how many workbooks it has been entered in. For example, I have workbook a, b, c, d, e, f. all have 12 sheets. On these 12 sheets there is a place to enter the serial number of an item. What I would like to be able to do is on a different workbook be able to type in a serial number and have it show which workbooks it has ever been typed in and its location on said workbooks. and if possible the results of the item which would be whether it was accepted or rejected( this bit is not totally must have. but the workbook and sheet location is a must.)
View 1 Replies View RelatedI have a sheet named "Current" and in Colum A named "VRM" there are registration numbers.
I have another sheet named "Potential Flyers" again Column A is named "VRM"
I would like in Sheet named "Current" to highlight a Reg Number if it is also typed into Sheet named Potential Flyers.
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I am looking for a formula to grab only the numbers withing a cell that has text in it i.e (John Peters142 lp) or (Sally Jones54) or (Terry Cram310 jkb) sometimes there will be text after the number and sometimes not, the format is as shown with no space between name and number but a space after the number.
I added a sheet for visual example.