VLOOKUP And Still Have Typed Text In Cell

Oct 27, 2008

I was wondering if there would be a way to use vlookup and still be able to type text in the same cell. For example, if the vlookup gives me a result of 123. I want it to also pull from a different cell that I've typed in 321. So the resulting cell would show 321-123 or 321 123. I have attached a sample sheet. On sheet two where the 3 items are, I want it to display 321-123 for item 1, 321-234 for item 2, and 321-345 for item 3. The 321 would be dependant on what I type into B1 on the first sheet.

View 2 Replies


ADVERTISEMENT

If Certain Text Typed Into Each Of Two Cells - Result Will Appear In Third Cell

Jan 16, 2014

I have a worksheet and in two of the cells I have text. In another cell I want to put a formula in so that if certain text is typed into each of the two cells a result will appear in the third cell.

Hazardous
Smiths
60%

Non Hazardous
Smiths
20%

Hazardous
Browns
45%

Can I put a formula in and if so, what formula would it be?

View 5 Replies View Related

Auto Updating AND Manually Typed Permanent Text In One Cell?

Feb 21, 2014

I need it to be like:

=B10 2014

(So the first part changes depending on what B10 is but the 2014 always stays)?

View 9 Replies View Related

Check If Text Typed In Cell Is Repeated In Row, Discounting Spaces

May 18, 2007

is there a formula which can locate instances of same text even though due to spaces it may look different? for example, "bad apple" and "badapple" are essentially the same.

View 2 Replies View Related

Pulling Specific Text Within Text In Which Information Is Typed Differently?

Aug 2, 2014

I am trying to pull titles out of a text string but its quite difficult because of how the data was originally inputted. I need titles that appear in the following different formats

" title"
title/
title"

These titles were not inputted consistently and it could show up in the middle or at the beginning. I have attached a sample of the data that i am working with and a sample formula that i was trying to use to obtain my information. The formula that i have is a nested formula of find and mid formula that searches for the text within " ".

View 5 Replies View Related

Replacing Text Just Typed?

Mar 6, 2014

I'm currently building a large spreadsheet which will require numeric codes to be within certain cells. At present these cells are filled with alphabetical codes and the person using them has little knowledge of the numbers, is there a simple way for them to type in the alphabetical code and it to then auto-replace it with the numberical?

View 8 Replies View Related

Change Formatting On One Sheet When Text Is Typed In Another

Jul 28, 2007

I am trying to have one sheet with company names on it and another as a schedule. I have about 20 companies that I need to list on the main schedule sheet. Is there anyway when I type a company name in one sheet, when it copies that cell to the schedule sheet, format that cell to a specified format? I know conditional formatting will work, but it only allows 3. I need around 20. I would just like to change the background color of that cell when the name is typed in.

View 9 Replies View Related

Forumla For The Calculating Total TIME But To Give A Value As 0 When Text Is Typed

Apr 14, 2009

I have set up a spreadsheet to calculate time as followed:

A1 - Start Time
B1 - Finish Time
A2 - Hours Worked:


=IF(B1<A1,B1+1,B1)-A1

C1 - Start Time
B1 - Finish Time
C2 - Hours Worked:


=IF(D1<C1,D1+1,D1)-C1

and so on.........

View 10 Replies View Related

Sum Only When Numbers Typed In Cell

Feb 2, 2012

Is there a formula that can sum only when i am typing numbers on a cell, but only when i enter new data to double check my quantities.

View 5 Replies View Related

Can Cell Keep Cumulative Of Values Typed In Adjacent Cell On Daily Basis?

May 31, 2014

See the attached excel table. I need the cell E4 to keep adding the values typed in the cell D4 on daily basis.The cumulative shouldn't be changed if there is no value in the cell D4. E4 should accumulate and keep the totals typed in D4...

Cumulative Input.xlsx‎

View 5 Replies View Related

Insert Picture Based On What Is Typed In Cell?

Mar 27, 2013

Can I have a picture appear next to what is typed in the cell next to it. I have a drop down list of the different pictures I have, I want to select, for example, "star" from the drop down list, can I have a picture of the star appear in cell next to it? I have all the pictures of the words in my drop down list.

View 1 Replies View Related

Macro To Scroll To A Row When A Keyword In The Row Is Typed In A Cell

May 10, 2014

I have a list of drugs which possibly could increase to thousands in rows. I will need a macro that can scroll down to a particular row when the text in that row has been entered.

Assuming I have LOTEMP in A5000 , I would want a macro to scroll to row 5000 when the word , " LOTEMP" is typed in cell , say B2.

View 2 Replies View Related

Auto-replace Typed Contents In A Cell With A Formula

Apr 9, 2008

I want to set up a sheet macro that will replace the contents of a cell (when a specific number is typed in) with a specific formula.

For instance, when "43" is typed into any cell within specified columns (say columns C and H), it changes to the following formula: =IF(D47="",43,IF(D47<=3030,408,43))(WHERE D47 WOULD REPRESENT THE CELL ADJACENT TO THE CELL WHERE "43" WAS TYPED.)

IE:

If "43" was typed into cell C1, then it would change to the formula: =IF(D1="",43,IF(D1<=3030,408,43))

If "43" was typed into cell C50, then it would change to the formula: =IF(D50="",43,IF(D50<=3030,408,43))

View 12 Replies View Related

Vba Detect When A Specific Set Of Cells Gets An X Typed Into It And Calculate 1 Cell = 36.50 Hours

Oct 22, 2009

I'm working on a timetable for my boss and i'm trying figure out how to have vba detect when a specific set of cells gets an x typed into it and calculate 1 cell = 36.50 hours and input into the appropriate Sum column. The Sum Total is Column AR and i've put x's into some of the cells that will be containing them, i'm sure if i just get the basic code needed i will be able to implement it.

View 5 Replies View Related

Value Typed In One Cell Needs Also To Be Appeared In Another Cell

Aug 18, 2014

Pls refer the attached excel work sheet.

My requirement is: values being typed in M31 and onwards to be also appeared in M11 and onwards without re typing them in M row.

Team(A)01.xls‎

View 2 Replies View Related

Vlookup On Part Of The Text In A Cell.

Jun 18, 2009

I am trying to do a vlookup and am having soem issues. I have data like this in the cell i am using as the reference: "60030 - COLUMBUS, OH". The first column of the range I am searching would have "60030" in it. What i need to know is how do I get the vlookup to just reference the first 5 digits in the reference cell? As you can see by the formula below, I set the logical value to true hoping that it would find the closest value, but it did not work. =VLOOKUP(A7,sdoalign,3,TRUE)

View 2 Replies View Related

How To VLOOKUP Varying Text From The Right Of Cell

Oct 12, 2012

I am trying to run a VLOOKUP that allows me to reference all text (which can vary in length) in a cell up to the first '' from the right of the string. Also note that the master table of data being retrieved from is in another workbook. For example:

TestSalesDealsPlans - I just want to reference Plans (5 characters up until but not include '')

TestSalesDealsOrder Management - I just want to reference Order Management which obviously has more characters than the above example 'Plans' (16 characters up until but not include '')

I am fairly certain I will need to nest several functions such as RIGHT, VLOOKUP, MATCH, INDEX, etc but just not sure the most effective way to go about this.

View 4 Replies View Related

VLookup Only Text String From A Cell

Nov 13, 2013

I do have a price list for my inventory for each product code (only letters)

E.g. productA 100
productB 200

When I'm writing in the order list, I'm writing in a single cell product code + size e.g. productA 5, productB 7

I need to get the corresponding price for each cell.

View 5 Replies View Related

Vlookup With Cell Instead Of A Number It's Text

Jul 13, 2006

i want to do a vlookup but the column i'm looking up is text instead of a number? i tried it and it doesn't work or is there some limitation with the character being only 16 max

example
column a

beegerters

View 2 Replies View Related

Vlookup Cell Containing Symbol & Text

Jun 1, 2007

having a problem with a vlookup when the cell value contains ~

ie. John~Smith

it returns an #NA even when my lookup table has John~Smith in it.

View 9 Replies View Related

Vlookup Will Not Find Text When A Number Is In The Cell

Mar 14, 2007

I am using VLOOKUP to match Account names in two tables.

If the names are made up of letters or letters+numbers the names match.

If the account names are purely numbers the names do not match.

All names are formatted as text.

I have tried using TRIM, numbers still do not match.

View 7 Replies View Related

Format Cell To Always Insert Specific Thing When Specific Name Is Typed?

Apr 4, 2013

Is there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?

This has seemed to have happened on a computer at work.

In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"

If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.

View 6 Replies View Related

LOOKUP / MATCH Function To Lookup The Owner Name Typed In Cell

Jan 2, 2009

I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.

For example, the data source contains different pets, their names, ages and their owners.

The other sheets are on a one-per-owner basis.

What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:

John Smith (in cell A1)

Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4

View 7 Replies View Related

Conditional Or VLookup (Gives True Or False If Text In A Cell Matches Any Cells In A Range)?

Jan 14, 2009

I need to create a formula that will give me True or False if text in a cell matches any cells in a range.

For example:

Column A and B have text:

Account
Date
Name
Species

Column C has other and sometimes matching text:
Name
Deal

What formula would I use to find out if all cells in Columns A and B are represented in Column C?

View 3 Replies View Related

Formula For A Letter Typed

Mar 23, 2007

I am trying to make a puzzle and use excel to verify I have done it correctly.
What I want to do is when I type a letter in a specific cell have it put a number value in another cell automatically. For instance, if I type the letter "a" in cell A1 I would like the number 60 to populate automatically in cell B1. I want to give each letter in the alphabet a numeric value so I can type a message in the A column and then auto sum the results of the numbers in the B column.

View 10 Replies View Related

The Formula You Typed Contains An Error ..

Jan 26, 2009

I am getting the 'the formula you typed contains an error" ....

View 9 Replies View Related

Sort And Hide Rows As Typed?

May 3, 2014

Is there a way to imitate the search box in access where it highlights any matching text in the entire database. BUT, instead of hitting the next arrow to go to the next matching thing, I want it to simply hide all rows that contain nothing that matches. I don't want it to just hide them though, I want them to be shown from the topmost cell down rather than simply hiding cells and having a ton of gaps to look through. If this can be done in access then that will work as well.

View 1 Replies View Related

Convert Variant To Typed Array

May 23, 2007

I am using strongly typed code, but I am also pulling data from worksheets into variants. e.g.

Dim MyArray As Variant

MyArray = [MyNamedRange]

is there any shortcut to convert the variant to a typed array, which doesn't just involve looping throught the variant and using a casting function, e.g.

Dim MyArray As Variant
Dim typedArray() As type

MyArray = [MyNamedRange]
typedArray = shortcut(MyArray)

View 4 Replies View Related

VLookup For Text And Add Relevant Values If Text Matches In Range

Jun 19, 2014

Check the attachment, i could not make out this using vlookup, how to overcome this problem.

test.xlsx‎

View 2 Replies View Related

Dropdown List - AutoFilter With First Few Words Typed

Jan 3, 2013

it is possible to have a drop down list (Cell A1) where you can type in the first few letters of a word and have the drop down list go to the the words that begin with those first few letters (searching in column 10) instead of having to scroll down the entire list to find the word / item you are looking for.

I ask since the drop down list may end up having up to 1000 words in it.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved