Formula To Validate Invoiced Rates Against A Rate Card?
Mar 23, 2014
We have agreed maximum rates with suppliers for certain services and I'd like to check that the rates they have invoiced fall below the agreed maximum.
I've attached an example of the data I'm working with. What I'm after is a formula that will cross check the details and rate charged on the 'Invoiced' tab against the three 'rate card' tabs and generate an output that flags any discrepancies. I've added a column called 'Validate' on the 'Invoiced' tab where I'd like this formula to go.
All the data should match with the exception of the shift which is listed as a description on the rate card but is a concatenation of the job role and an abbreviation of the shift (D = Days, N = Nights/ Saturday and O = Sunday/ Bank Hols).
View 8 Replies
ADVERTISEMENT
Aug 15, 2007
formula is needed to get excel to calculate all A rates seperate from B rates and C rates example 10 A rates @ 50.00 9 B rates @ 40.00 and 6 C rates @ 30.00 so although the rates could be mixed up (not following in any particular order the result which I would like to appear on a separate spreadsheet would be A = 500.00 B = 405.00 C = 180.00 then to get them to total up = £1085.00
A 50.00
B 40.00 then separate sheet with answer a 100.00 b 40.00 c 60.00
A 50.00
C 30.00
C 30.00
View 9 Replies
View Related
Aug 23, 2012
I want to calculate labour rates as follows:
06:00 to 18:00 std rate $10
18:00 to 06:00 night shift rate $15
I want to be able to type in the hours worked e.g. 11:00 to 19:00 and would expect 7hrs at $10 and 1 hr at $15.
View 1 Replies
View Related
May 29, 2014
What I am trying to do is to create a formula for the attached spreadsheet - that calculates the daily compounding interest based on the higher rate of the two rates for the first five years then after 5 years the calculation should only be based solely on the blocked rate.
View 5 Replies
View Related
Jun 26, 2013
The usage of the wild card character is not getting me the results I need for a formula I am using at work. When the wild card asterisk character is removed, I get the correct result but only for an exact match of the particular text. I need it to match the "Particular Text plus another text. The Text is CBKC. Then there is also CBKC 5400 and so on. I need to have the wild card expression character before and after the CBKC characters. The formula is below that I used.
=sum(--k2:k500),--(c2:c500=" Y"),--(D2:D500=" Permit"),--(s2:s500="*CBKC*))
Excel doesn't like the way I am expressing the wild card inside the double quotes......the column getting added if the matches are found is column K. The other columns have to meet the criteria in the formula.
View 6 Replies
View Related
Jun 10, 2014
Looking for a formula for total cost based on a list of hours for each employee and a table of rates for each employee.
Please see attached file : Formula.xlsx‎
View 1 Replies
View Related
Jun 4, 2007
The formula I am looking for would tell me what annual growth rate % I would need to achieve to make any investment reach a set target, for instance, what % of fixed annual growth would I need to make 200K grow to 750k in say 10 yrs or any time scale. I was given the formula below but Excel tells me it's wrong, I have tried putting 10 before ^ and the 10 after but to no avail, could some kind soul please put me straight.
r = 100((Y/X)^(1/n))-1)
So for X = 200, Y = 750, n = 10, we have
r = 100((750/200)^(0.1))-1) = 14.1309%
View 3 Replies
View Related
May 4, 2009
I have a sheet which details specific card numbers in Column A, and the date and place of transaction in the Column B. This very long list contains multiple entries for each card number. What I would like to do is use Sheet2 to list each card number and the number of times it appears in the list.
View 4 Replies
View Related
Mar 25, 2014
I'm trying to calculate the amount of money invoiced per company per month. In column B I have the date the invoice was issued. In column E I have the Company name. In column G I have the amount invoiced.
View 6 Replies
View Related
Sep 19, 2006
I have 12 different sheets named April-06-sales through to march-07-sales. I need is to be able to search all of the sheets and check if the invoiced paid column is blank and if it is copy that row into a new sheet. All of the sheets have a different number of rows.
View 2 Replies
View Related
Aug 23, 2007
I would like to know the formula used in excel for rate function. Anybody knows and can share with me ? as i need to use that in other programmining language where these financial functions are not available.
View 9 Replies
View Related
May 12, 2007
FromToGr Rate
90100A14.0
8689A23.6
8085B13.2
7279B23.0
6471B32.8
5663C12.6
This is part of a marks to grade and rating table. I have a list of students and the marks they obtained in an exam. I need a formula to put the grade and rate beside each name e.g. John; 92 marks; A1; 4.
View 9 Replies
View Related
Oct 2, 2007
Looking for a formula that would calculate flow rate (GPM) based of ID of pipe & PSI.
Example - 3/4 inch ID pipe at 70 psi = GPM
View 9 Replies
View Related
Dec 27, 2012
I am trying to calculate a new base pay rate, but I need it make sure it is at least brought up the new minimum and capped at the new max of the range where applicable. The increase is based on 10%
So here are the columns used:
L = Current Base Pay
Q = New Min of the range
S = New Max of the range
U = where I want to calculate a 10% increase of L, but ensuring it is brought up to at least the min (Q) or not over Max (S). In other words if my min is $12 and Max $18 and my new base pay is $16 -- then I am good. However it if is $11.50 I need the formula to return at least $12. And visa versa -- if the new rate would be $18.50, I need it to return no more than $18.
View 3 Replies
View Related
Jan 27, 2007
I am trying to calculate the effective annual interest rate earned on an investment and find the results are close but not really accurate. I suspect because I have not included the frequency of interest in my existing formula
r = n * nt root (A/P-1)
where;
r = the effective interest rate
n = the number of times interest is added per year
t = the total number of years
A = the current value
P = the original value
The 2 problems I face are;
1. Confirming this formula would provide the correct answer (need maths expert here) &
2. How would "nt root" (as in sqr root, but using the product of the years and frequency) be used in Excel
View 9 Replies
View Related
Jul 18, 2012
Here is the current code I am using: =IF(A1="MIXED DBLs 1st Place",'Mixed Doubles'!B9,"")
What has happened is I am changing the Field Mixed DBLs to a field that could have multiple values, so I am no longer going to be able to do a test on a Hard-Coded Value.. So is there a way to only validate on the front of the word like just MIXED DBLS and nothing after that??
View 2 Replies
View Related
Oct 28, 2009
Trying to create a formula, assume it will need to be a nested formula since I need to validate that cells are not blank and if so use a different cell .....
View 9 Replies
View Related
Mar 11, 2014
I am trying (and failing miserably) to create a fomula to 'score' my pickers in a warehouse environment.
The basic variables are;
1) Units (Total quantity of units on picklist)
2) Lines (Number of different products on picklist)
3) Time (Total time to complete pick)
To give an example, if Units = 8, Lines = 1 and Time = 00:01, I want 'Score' to = 100.
(Based on benchmark, rounded down to lowest common denominators)
The added complication I face is the relationship between Lines and Units; it would take someone longer to pick 1 unit from 10 lines than 10 units from 1 line.
View 2 Replies
View Related
May 14, 2009
I would like to a formula that will provide a weighted average rate (yellow cells) for a provided volume level, given the tiers on the left. I have already performed this the "dumb" way with lots of IF statements to figure the volume by tier and then taking a weighted average of the products with the rates by tier, but there's got to be a more efficient way. My file is huge! ....
View 9 Replies
View Related
Oct 5, 2009
I have a spreadsheet, but I need the following formula to make our lives easier here.
I have the following columns:
Rate, I/T/P/S, FT/PT
I need a formula that when I enter "I" for Infant it will give me the FT (full time) or PT (part time) rate. All the columns have drop down menus, so if I choose "I" under the ITPS column and then choose FT, I want the formula to be able to give me the full time rate which is 157.94
View 9 Replies
View Related
Feb 13, 2014
From a chart in Excel I need to automatically calculate what the annual percentage growth rate is of a trend line. How to automate this in Excel? I've attached a sample so you can see what I'm trying to accomplish.
View 6 Replies
View Related
Mar 26, 2013
I need to know if its possible, and if it is, what the formula would be to get the correct "Rate" to pull based on the criteria given:
User would input the following information:
Zip Code: 56559
Pallets: 3
Weight: 1200
The formula needs to use the following table to use the criteria listed above, to fine the correct "Rate". The "Zip Code" and "Weight" both need to fall between the correct ranges and then match the "Pallet" to find the correct "Rate".
From Zip Code
To Zip Code
Pallets
Weight From
Weight To
[Code]......
View 1 Replies
View Related
Mar 5, 2014
Column A = persons name
Column B = number of hours
Column C = trade
Column D = shift (as in day, night or weekend)
Column E = I would like the formula that looks at the trade and time and then puts the correct rate.
I have a little table on the site with trades/times and rates. IF and IF THEN do something
I took a screenshot to show: [URL] ..........
View 3 Replies
View Related
Mar 27, 2014
I have been trying to work on this excel worksheet for a while. I have give the charge column (tab:data) and the rate chart (matrix type with weight and zone). I want to find the formula that would tell me if the charge is in the rate chart (I know it would use countif), and tell me what the zone and the weight associate with it. Using
=CELL("address",Index()), but it won't work.
View 1 Replies
View Related
Oct 29, 2013
I am trying to create a formula that will allow me to enter a zip code and have excel return the specific tax rate for that zip code. I have zip codes in excel for all of California along with the corresponding tax rates. I am creating a form that I can just input the zip code and have the tax rate automatically pop in.
View 1 Replies
View Related
Nov 15, 2013
I am looking to setup a formula to calculate a Fee that is based on the number of users of a service in a month, with the rate varying by the number of users. The first million users in a month will bring in $0.40 per user, for users 1-4M it will bring in $0.30 per user, for users 4M-7M it will bring in .20 per user, and for users beyond 7 million it will be .10 per user. So for example, if a user count was 9 million in a month, the calculation would be ($0.40 x 1 million) + ($0.30 x 3 million) + ($0.20 x 3 million) + ($0.10 x 2 million). I know the answer to the problem is obviously $2,100,000 but I can't build the formula that solves that and can handle instances where the user count is capped in one of the individual brackets. (IE if there are 3.5M users)
I've attached an example spreadsheet : Variable Fee Schedule.xlsx‎
View 7 Replies
View Related
Jul 10, 2014
I have a model that makes projections based on annual growth rates. However, I need to evaluate the data based on monthly intervals. With an 8% return on an investment of $1,000,000 my ending balance at the end of the year should be $1,080,000 and in year 2 it would be $1,166,400 and so on. In order to evaluate the monthly data I need each month in year 1 to be based off $1,000,000, so it would be 8%/12=.006666% or $6,666.66 per month. The next year would be based off $1,000,000 + (6,666.66*12) = $1,080,000 and each month would be $7,200.
writing a formula to evaluate over 360 periods.
View 5 Replies
View Related
Jun 24, 2008
i have a bunch ofdaily rates back from 2005. sometimes ill have one or even 2 or 3 missing rates in a row. when there is a blank rate, i just want excel to calculate the average of the date below and the date after. right now, ive just been going manually to each missing date's rate and calculating the average.
View 9 Replies
View Related
Mar 27, 2007
I am trying to create a conditional formula. I have multiple workers that work for different $$ per hour. I am keeping the hourly rates on one page for security purposes (the person that is going to be updating the hours worked is not very computer savy and they less they have to type the better) and the hours on another... I want copy a formula down the page that will calculate the hours to the hourly rate. The issue is that i want the formula to look at all of the hourly rates (assume they get raises) for Joe and multiply the most recent hourly rate times the hours... in addition I don't want the formula to re-calculate when a new hourly rate is put into the hours sheet.
Example
Jan. 1 joe works 8hours at $10 per hour formula in A1 (or wherever) calculates $80
Jan. 2 joe gets $1 raise
Jan. 2 Joe works 8 hours at $11 per hour formual in A2 calculates $88 but formula in A1 maintains the $80 and does not calculate the $1 raise.
View 12 Replies
View Related
Oct 25, 2011
There is a database of rates, stored in an excel table. There are dates (in the format MMYY) and corresponding currencies (100 in total)
I would like to have a custom function where I could type
=RATELOOKUP("EUR","0911")
And the corresponding rate will appear
The excel file with the rates is stored read only in a locked folder on the network so the format and layout will not be affected
How could I macro this? - then turn the result into an addin so that everybody can take advantage of this.
View 9 Replies
View Related
