Creating Formula To Lookup Rate Using Ranges And Other Criteria?
Mar 26, 2013
I need to know if its possible, and if it is, what the formula would be to get the correct "Rate" to pull based on the criteria given:
User would input the following information:
Zip Code: 56559
Pallets: 3
Weight: 1200
The formula needs to use the following table to use the criteria listed above, to fine the correct "Rate". The "Zip Code" and "Weight" both need to fall between the correct ranges and then match the "Pallet" to find the correct "Rate".
From Zip Code
To Zip Code
Pallets
Weight From
Weight To
[Code]......
View 1 Replies
ADVERTISEMENT
May 28, 2014
I need creating a formula for the following situation.
I need to link multiple arrays from different sheets. But am having a hard time concocting a formula that will work.
I have 2 columns of data on sheet1. For example:
A-------------B
apples-----1245
oranges----456
nuts--------384
etc.
Now, I need a formula that will sum the entire column B, by looking up the array of column A on another sheet and only summing the numbers on sheet 1 that also have a value of "West" on sheet 2. Sheet 2 looks like this:
A-------------B
apples------West
oranges-----East
nuts---------West
This needs to be functional as a template to be used each month - the entire point of the formula is to save time and eliminate the current (and lengthy method that is in use). I can tweak the formulas as needed. But am trying to avoid having to concatenate anything or do any modifications to the format of the sheets.
View 1 Replies
View Related
Jun 18, 2014
My problem is trying to identify the applicable rate in a range of dates that are not consistent in every case. I have a number of orders that span 4 years. The rate charged has changed over time and therefore I'm trying to find what the applicable rate would be for that time frame. For example one of my orders was created on 2/27/2012 with a specific item, then again the same item was ordered on 9/10/2013 and I need to find what the rate should have been for both of those orders during those rate periods. I've attached a sample sheet with the 2 tables I've been trying to assess. I've tried using mulitple IF and VLOOKUP formula's but it doesn't work they way I need it to due to the inconsistency in Table 2. H
View 2 Replies
View Related
Jan 30, 2012
I have 2 cols of dates; col1 effective from, col2 effective to. In col c i have a list of corresponding rates. How can i look up the rate corresponding to a specific date. I've tried lookups and matching formulas but not working.
View 1 Replies
View Related
Dec 24, 2005
I have a sheet listing comission rate eg. sales less than $200, the rate is
..5%, less than 300, the rate is 1%..etc.
Then i have another table showing different sales value of different workers. How do i find the commission rate per worker using lookup functions??
View 12 Replies
View Related
Oct 24, 2013
I need to change the value returned in one cell based on the criteria of a 2nd cell. In short, if the letter 'C' is entered into A1 and B1 contains a vowel the lookup formula needs to return the value found in column C of a separate spreadsheet, but if the 'C' is entered into A1 and B1 contains a consonant then return the value of Column B. I want this to be applied to C, O, R & S only. If A1 contains any other letter, than the lookup formula should return only values found in column B of the separate spreadsheet.
View 3 Replies
View Related
Mar 20, 2014
What formula should I put in NUTRISTATUS column. That will search value in the table of MALE BMI and FEMALE BMI. for example when I input data M(male) in ***(gender), age in M(m0nth) and BMI it will search in MALE BMI table..
and I input data F(female) in ***(gender), age inM(month) and BMI it will serach in FEMALE BMI table.
and if the criteria match will appear the word SEVERLY UNDERWEIGHT or OVERWEIGHT or UNDERWEIGHT or NORMAL or OBESE in NUTRISTATUS Column..
View 3 Replies
View Related
Jan 19, 2012
I have a report to fill that looks like this:
Table 1:
HEMANITOBAMANITOBA SK12
I want to fill it up with data from this pivot table:
HEIntervalManitobaManitoba SK11-10522-8423-8224-6125-5826-6427-6828-5929-53210-47211-53212-63221-7522-8023-7924-7825-7726-7627-7728-8229-86210-86211-86212-722
So basically what I want to do is for example from Table 1: If I want to find the what goes in cell in B2 (1, Manitoba) then I want to go to the pivot table find 1 which is in the first column(HE), there are 12 intervals to each HE(as seen in column 12), I want to take the average of all the HE with 1 corresponding to Manitoba (the values in Column 3) and to be put into B2 in Table 1.
View 2 Replies
View Related
Dec 20, 2013
I am using a list like this.
A
B
C
D
1
Teacher
Name
Color
Size
[Code] ....
I need formulas that can evaluate the table above and provide the information below. If there needs to be multiple steps/formulas, I'm okay with that.
Two sticking points, BOLD - be listed twice with the same teacher. I don't want them counted twice in the "Size 3" column. BOLD & italicized- same student could be in two different teachers' classes. They need to be counted under both.
Teacher
Red
Green
Blue
Size 3
[Code] ...........
View 5 Replies
View Related
May 6, 2014
I have a schedule that covers 3 shifts for the entire month. I have another sheet that is used for crew sign in that I want to auto populate with all the people on that shift for that day.
I need to be able to use 2 different cells on the sign in sheet for reference for the formula (one for the day, and the other for the shift. ex. Day 3rd, shift D). I'm wanting to use an array formula to accomplish this. I've uploaded a stripped schedule as this is for the military and can't have any data on it that pertains to what or who it's for.
BTW our current method is to due it manually for every shift for every day that wastes about 12-16 man hours every week. I have excel 2010 at work currently. Access is out of the question and Macro's/vba may or may not work as security is always being increased on our systems so either a single or multiple formula is the route I'm looking to do that will work the the next few years I hope.
View 6 Replies
View Related
Jun 17, 2014
I would like to create a formula in a summary sheet ("sheet 2 section" in attached)that looks up and sum cells based on multiple criteria in row and columns in "sheet 1 section". I thought I sumifs would work, but I kept getting #value errors. I'm not a power user in excel. I attached the spreadsheet - it is only an example of what I want to do as the real data is confidential and large. The result I should I get is in section 2. Lookup account 12.251 for tim in the month of February - result is 14.
Test2014.xlsx
View 3 Replies
View Related
Feb 26, 2012
I'm trying to find a formula that will find an original entry using 4 criteria original entry is cases ordered.
columns A,B,C,D will have to match then give me a result in column E to find original entry if there is one otherwise I will have to enter new row and original entry for cases ordered.
Eg.
A = section
B = description
C = size
D = region
E = cases ordered
Row 2 = fruit, apples, medium, north, 25
Row 45 = fruit, apples, medium, north,
View 3 Replies
View Related
Jun 4, 2007
The formula I am looking for would tell me what annual growth rate % I would need to achieve to make any investment reach a set target, for instance, what % of fixed annual growth would I need to make 200K grow to 750k in say 10 yrs or any time scale. I was given the formula below but Excel tells me it's wrong, I have tried putting 10 before ^ and the 10 after but to no avail, could some kind soul please put me straight.
r = 100((Y/X)^(1/n))-1)
So for X = 200, Y = 750, n = 10, we have
r = 100((750/200)^(0.1))-1) = 14.1309%
View 3 Replies
View Related
Aug 23, 2007
I would like to know the formula used in excel for rate function. Anybody knows and can share with me ? as i need to use that in other programmining language where these financial functions are not available.
View 9 Replies
View Related
May 12, 2007
FromToGr Rate
90100A14.0
8689A23.6
8085B13.2
7279B23.0
6471B32.8
5663C12.6
This is part of a marks to grade and rating table. I have a list of students and the marks they obtained in an exam. I need a formula to put the grade and rate beside each name e.g. John; 92 marks; A1; 4.
View 9 Replies
View Related
Oct 2, 2007
Looking for a formula that would calculate flow rate (GPM) based of ID of pipe & PSI.
Example - 3/4 inch ID pipe at 70 psi = GPM
View 9 Replies
View Related
Mar 9, 2009
I am attempting to create a formula for a project. The multipliers I use will be based off of # of units used. So lets say I have 500,000 units. The first 100,000 would be multiplied by 9.3, 100,000.01 - 250,000 would be multiplied by 9.5 and 250,000.01 - infinite be multiplied by 9.7. I know I can created different cells, but wanted to see if this could be done with one formula. I tried using sumif but that doesnt appear correct.
View 8 Replies
View Related
Dec 27, 2012
I am trying to calculate a new base pay rate, but I need it make sure it is at least brought up the new minimum and capped at the new max of the range where applicable. The increase is based on 10%
So here are the columns used:
L = Current Base Pay
Q = New Min of the range
S = New Max of the range
U = where I want to calculate a 10% increase of L, but ensuring it is brought up to at least the min (Q) or not over Max (S). In other words if my min is $12 and Max $18 and my new base pay is $16 -- then I am good. However it if is $11.50 I need the formula to return at least $12. And visa versa -- if the new rate would be $18.50, I need it to return no more than $18.
View 3 Replies
View Related
Jan 27, 2007
I am trying to calculate the effective annual interest rate earned on an investment and find the results are close but not really accurate. I suspect because I have not included the frequency of interest in my existing formula
r = n * nt root (A/P-1)
where;
r = the effective interest rate
n = the number of times interest is added per year
t = the total number of years
A = the current value
P = the original value
The 2 problems I face are;
1. Confirming this formula would provide the correct answer (need maths expert here) &
2. How would "nt root" (as in sqr root, but using the product of the years and frequency) be used in Excel
View 9 Replies
View Related
Mar 11, 2014
I am trying (and failing miserably) to create a fomula to 'score' my pickers in a warehouse environment.
The basic variables are;
1) Units (Total quantity of units on picklist)
2) Lines (Number of different products on picklist)
3) Time (Total time to complete pick)
To give an example, if Units = 8, Lines = 1 and Time = 00:01, I want 'Score' to = 100.
(Based on benchmark, rounded down to lowest common denominators)
The added complication I face is the relationship between Lines and Units; it would take someone longer to pick 1 unit from 10 lines than 10 units from 1 line.
View 2 Replies
View Related
May 14, 2009
I would like to a formula that will provide a weighted average rate (yellow cells) for a provided volume level, given the tiers on the left. I have already performed this the "dumb" way with lots of IF statements to figure the volume by tier and then taking a weighted average of the products with the rates by tier, but there's got to be a more efficient way. My file is huge! ....
View 9 Replies
View Related
Oct 5, 2009
I have a spreadsheet, but I need the following formula to make our lives easier here.
I have the following columns:
Rate, I/T/P/S, FT/PT
I need a formula that when I enter "I" for Infant it will give me the FT (full time) or PT (part time) rate. All the columns have drop down menus, so if I choose "I" under the ITPS column and then choose FT, I want the formula to be able to give me the full time rate which is 157.94
View 9 Replies
View Related
Jun 3, 2014
I have to create ranges of unique numbers that follows the below rules.
1) Have to start with 3 standard digits (ie 101 or 102 etc)
2) The total length of the is has to be 10 digits (ie 1010123456)
3) The second part (the last 7 numbers) must be unique!
4) Can create a lot of numbers (more that 5000 rows)
5) thats all with the unique numbers
Continue,
Somewhere in the sheet has to be a search function to find where a specific id is located, make it red and copy/cut in to another sheet.
View 7 Replies
View Related
Aug 21, 2009
I have a long list of zip codes (this is just a small portion of the list) that I need to make into ranges. Is there a formula I can use?
From this list:
90080
90081
90082
90083
90084
[Code] ......
To this:
To From
9008090084
9008690089
9009190091
9009390099
9010190103
9017490174
9018590185
9018990189
9020190202
9020990213
9022090220
View 3 Replies
View Related
Nov 2, 2011
i am trying to write a macro to loop through a column of data, creating a named range each time it encounters a certain string. so, it inititially finds the first instance of the string, then finds the next instance, offsets one row back and then names that as the first named range. how do i get it to actually loop through the column until the end of the data?
I can get the first range named but can't figure how to get a loop into my macro to repaeat the process.
Code:
Sub x()
Dim rngTemp As Range
Dim rngFind As Range
Dim rngFirst As Range
Dim rngLast As Range
Dim nom As Range
Dim strFirstAddress As String
[code].....
View 2 Replies
View Related
May 26, 2007
I need to create a consecutive number range
from 10,770 to 14,194
(using only numbers that end in 0,1,2,3, & 4)
In other words, with No numbers that end
in 5/6/7/8/9
Example: 10,770
10,771
10,772
10,773
10,774
10,780
10,781
10,782
10,783
10,784
10,790
10,791
... and so on, upto 14,194
View 4 Replies
View Related
Feb 13, 2014
From a chart in Excel I need to automatically calculate what the annual percentage growth rate is of a trend line. How to automate this in Excel? I've attached a sample so you can see what I'm trying to accomplish.
View 6 Replies
View Related
Aug 25, 2014
I can't seem to get this to work the way I need it to do. Let's say I have a 2 sheet workbook. Sheet1 is called "Order" and Sheet2 is called "005". On sheet2 (005) I have 9 columns that are populated. Row 1 is my header row and then row 2+ is all my figures. On sheet 1 (order) I want A1 to look at sheet2 (005) in F1:F10000 to find all cells that have "N" in the cell. I then want it to return value in column A that corresponds with the "N". I want it to list all the ones from Sheet2 (005).
Sheet 1 (order)
A
052611
052806
052843
Sheet 2 (005)
__A_____B____C_____D_____E____ F
052611_________________________N
154272_________________________Y
125485_________________________Y
052806_________________________N
125478_________________________N
052843_________________________N
how I can write is in a formula?
View 7 Replies
View Related
Mar 23, 2014
We have agreed maximum rates with suppliers for certain services and I'd like to check that the rates they have invoiced fall below the agreed maximum.
I've attached an example of the data I'm working with. What I'm after is a formula that will cross check the details and rate charged on the 'Invoiced' tab against the three 'rate card' tabs and generate an output that flags any discrepancies. I've added a column called 'Validate' on the 'Invoiced' tab where I'd like this formula to go.
All the data should match with the exception of the shift which is listed as a description on the rate card but is a concatenation of the job role and an abbreviation of the shift (D = Days, N = Nights/ Saturday and O = Sunday/ Bank Hols).
View 8 Replies
View Related
Mar 5, 2014
Column A = persons name
Column B = number of hours
Column C = trade
Column D = shift (as in day, night or weekend)
Column E = I would like the formula that looks at the trade and time and then puts the correct rate.
I have a little table on the site with trades/times and rates. IF and IF THEN do something
I took a screenshot to show: [URL] ..........
View 3 Replies
View Related
