Is there a formula I can use to see if a cell is highlighted? I need to filter for highlighted cells and want to use a formula to produce a binary result (1 for highlighted or 0 for no highlighting) so I can filter on that to only the highlighted cells.
View 5 RepliesMy problem is trivial but annoying. When I initiate my user form, one of the check boxes has a dashed border around the outside as if it was selected. No matter what I try, I cannot get the form to initialize without effecting this box. If I delete the box and recreate it, another box simply inherits this problem.
I have attached the spreadsheet, please Click the button over "A1" to see what I mean if you have the time.
I need to setup a formula so that a cell is highlighted if two conditions are met. No matter what I do I cannot seem to get it to work.
This is what I'm after. If cell D1
Can use a highlighted range in a macro or a formula.
Just really want to be able to highlight a range of cells in column B and maybe click a button to launch a userform with a label on. The label would have the average of the highlighted cells.
Does this sound possible?
is there a formula that will sum the CCY amounts as highlighted in yellow?
AUD5444579AUD889AUD2144AUD848AUD154USD874902USD14USD14
The attached worksheet is for giving competitors a score of 1 if they meet certain criteria and 0 if they dont. Need to write a formula that warns me if the three highlighted ratios are not meet. The last Ratio (15) is on a sliding scale so must be at least 1.
View 6 Replies View RelatedIs it possible to have a formula check the color index of a cell?
Example if A1 color index = 6 then X
Ok. I am creating item lists in excel for every product that my company sells. I am in need of a formula that does the following:
I want the cell to check to see if there is a value in another cell, and if there is anything at all, i want to display the word Yes as the value, or leave the cell empty.
So I want the cells in Column A to Check if the adjacent cells in Column B have a value. If the column b cells have a value I want the cells in Column A to display the word "Inventory Part". If there is no value I want the cell left blank.
The loop is putting the correct formula into the cell - but THEN... - I wish to (within the loop and before it moves on) check if the value is equal to OR greater than 1 - if it is, make it a value of 1 (this '1' is then used at the bottom of the column of data to give a total). I need to do this before it moves onto the next cell. What am I doing wrong? Is it because once it puts formula in the cell, it then moves down - do I need to select the cell again first? As I had originally posted on this site - link: url]http://www.excelforum.com/showthread.php?t=641970[/url]
View 2 Replies View RelatedI have approximately 180,000 rows of data in column A. Is there anyway to return a value next to a highlighted cell in column B?
Example: If Cell A4 is filled(highlighted), I need to return 1 in cell B4.
Capture.JPG
In the attached, I want cells to be highlighted red if they're NOT EQUAL to 0. Why is this conditional formatting not working (i.e. the cell is being highlighted)?
Conditional Formatting Example.xlsx
how do I make a highlighted cell blink on and off?
View 9 Replies View RelatedI want to change (via conditional formatting) the background colour of cell H64 and K72 when I select / highlighted / activate (i.e. just left click in the cell) cell C66.
I don't seem to be able to find in the formulae something to indicate if C66 is selected / highlighted /activated.
I need a hint for one complex validation. In column B I am having emails and need to validate that after @ the extension is yahoo.com. If something different from that I need the cell highlighted.
View 4 Replies View RelatedHow to get the contents of the currently highlighted cell into a variable and how to place it elsewhere. They suggested this....
Sub CurrentCell()
Dim CurrentCellText As String
Dim CurrentCellString As String
CurrentCellString = CStr(ActiveCell.Value)
'.......
'.......
Range("G16").Value = CurrentCellString
End Sub
My question now is - If the cell contains a runnable Dos comand, how do is send it to a Command window. (E.g. netsh interface ip address local static 192.168.0.1.255.255.255.0) (this sets your NIC's ip address).
I have a sheet with a table. Cell A12 downwards will contain part numbers. I wish to have a button that creates a new sheet based on the currently selected cell in Column A. I have the following code that creates the sheet based on a static cell value.
Sub Add_Worksheet_Name_From_Cell()
Dim NumberSheets As Integer
NumberSheets = ActiveWorkbook.Worksheets.Count
Sheets.Add After:=Sheets(NumberSheets)
ActiveSheet.Name = Sheet1.[A12].Value
Sheet1.Activate
End Sub
How do you assgin a vaule to highlighted cells?
I'm using excel 2007.
I have 4 rows that are on a "Resource" sheet need to be inserted into about 150 different variable locations across 20 different sheets. Here is the code I have so far the will copy it to one specific location (see below). I need making the macro insert these copied cells to which ever cell I currently have active. I'm still really new at VB programming so this probably something really simple to solve.
View 4 Replies View RelatedI have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
when i highlight any number of cells what i want to be able to do is enter a character and for each cell within the selection that value is entered.
i know this is possible by pressing CTRL + ENTER but is there a way i can code it onto the sheets module?
I'm using windows xp and excel 2010. I have a very large sheet that has a bunch of highlighted cells. There all highlighted the same color. I need to remove the highlighting colors and change the font color of the highlighted cells to red.
View 3 Replies View Relatedis there a formula i can use to sum the sales revinue column of the attached per month into the yellow highlighted cell @ the bottom?
View 2 Replies View RelatedHow can i display the row number of the current highlighted cell in A1. I want this value to change dynamically as the cell selection changes
View 1 Replies View RelatedI have this worksheet whereby I want the active cell to move to the next row if it is highlighted. I have tried to run the below code but it is not working.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Interior.Color = 5296274 Then
Target.Offset(1, 0).Select
End If
I have a IF formula that check if F13 cell is "+" if not do calculation (F13-E13) and stop, if yes go to the previous line and check if the F12 is "+" if not do calculation (F12-E12) and stop, if yes continuo to the previous cell and so on until you find cell without +
The EXCEL IF formula is
=IF(F13="+",IF(F12="+",IF(F11="+",IF(F10="+",IF(F9="+",IF(F8="+",E8-F8),F9-E9),F10-E10),F11-E11),F12-E12),F13-E13). I'm looking for VBA code with FOR to run and do the same without the limitation of 7 if inside if.
I need two formulas that can do the folowing:
check whether a cell contains text, if so, then trim all spaces and get result. If it doesn't contain text then set the result as blank.
check whether THE CELL T13 contains text, if it does then check the adjected cell (U13) if it contains text, if so, then concatenate the two cells with a space between them and remove any other spaces. If the T13 doesn't contain text, the set the result as blank. Also, I have another question: how could I use the counta formula without counting spaces?
=IF(OR(Q136<O132,Q136>O132),Q136-O132,O132-Q136)
This does not seem to be working for me. I need to check one number against another and if the one cell is larger then the other subtract it or just the reverse.
I need a solution for this situtaion! Iam using a french version of excel2003!
I have #DIV/0! in P24 (i.e an error value) So I need to check in Q24 such that if (P24=#DIV/0!,0,P24). I need to have a logical formula for this one!
I have a direct mail company and lock in certain areas for a certain amount of time for my clients.
I want to be able to check a hand full of zip codes to see if they are aviable for new clients.
The lock in period is 60 days.
For a zipcode to be available it can not be in my list or has passed the 60 day expiration.
Attached file.
I need to come up with a formula to verify that the last 3 characters of a text string match the 3 characters in the adjacent cell. So I am comparing in the example below Column B to Column A.
Ex:
A1 010 B1 3.010
A2 010 B2 1A.010
My spreadsheet is very large and I need to get this done without manually having to look at each.