I have this worksheet whereby I want the active cell to move to the next row if it is highlighted. I have tried to run the below code but it is not working.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Interior.Color = 5296274 Then
Target.Offset(1, 0).Select
End If
How can i display the row number of the current highlighted cell in A1. I want this value to change dynamically as the cell selection changes
View 1 Replies View RelatedI have approximately 180,000 rows of data in column A. Is there anyway to return a value next to a highlighted cell in column B?
Example: If Cell A4 is filled(highlighted), I need to return 1 in cell B4.
Capture.JPG
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
In the attached, I want cells to be highlighted red if they're NOT EQUAL to 0. Why is this conditional formatting not working (i.e. the cell is being highlighted)?
Conditional Formatting Example.xlsx
how do I make a highlighted cell blink on and off?
View 9 Replies View RelatedIs there a formula I can use to see if a cell is highlighted? I need to filter for highlighted cells and want to use a formula to produce a binary result (1 for highlighted or 0 for no highlighting) so I can filter on that to only the highlighted cells.
View 5 Replies View RelatedI want to change (via conditional formatting) the background colour of cell H64 and K72 when I select / highlighted / activate (i.e. just left click in the cell) cell C66.
I don't seem to be able to find in the formulae something to indicate if C66 is selected / highlighted /activated.
I need a hint for one complex validation. In column B I am having emails and need to validate that after ” @ “ the extension is yahoo.com. If something different from that I need the cell highlighted.
View 4 Replies View RelatedI need to setup a formula so that a cell is highlighted if two conditions are met. No matter what I do I cannot seem to get it to work.
This is what I'm after. If cell D1
How to get the contents of the currently highlighted cell into a variable and how to place it elsewhere. They suggested this....
Sub CurrentCell()
Dim CurrentCellText As String
Dim CurrentCellString As String
CurrentCellString = CStr(ActiveCell.Value)
'.......
'.......
Range("G16").Value = CurrentCellString
End Sub
My question now is - If the cell contains a runnable Dos comand, how do is send it to a Command window. (E.g. netsh interface ip address local static 192.168.0.1.255.255.255.0) (this sets your NIC's ip address).
I have a sheet with a table. Cell A12 downwards will contain part numbers. I wish to have a button that creates a new sheet based on the currently selected cell in Column A. I have the following code that creates the sheet based on a static cell value.
Sub Add_Worksheet_Name_From_Cell()
Dim NumberSheets As Integer
NumberSheets = ActiveWorkbook.Worksheets.Count
Sheets.Add After:=Sheets(NumberSheets)
ActiveSheet.Name = Sheet1.[A12].Value
Sheet1.Activate
End Sub
How do you assgin a vaule to highlighted cells?
I'm using excel 2007.
I have 4 rows that are on a "Resource" sheet need to be inserted into about 150 different variable locations across 20 different sheets. Here is the code I have so far the will copy it to one specific location (see below). I need making the macro insert these copied cells to which ever cell I currently have active. I'm still really new at VB programming so this probably something really simple to solve.
View 4 Replies View Relatedwhen i highlight any number of cells what i want to be able to do is enter a character and for each cell within the selection that value is entered.
i know this is possible by pressing CTRL + ENTER but is there a way i can code it onto the sheets module?
I'm using windows xp and excel 2010. I have a very large sheet that has a bunch of highlighted cells. There all highlighted the same color. I need to remove the highlighting colors and change the font color of the highlighted cells to red.
View 3 Replies View Relatedis there a formula i can use to sum the sales revinue column of the attached per month into the yellow highlighted cell @ the bottom?
View 2 Replies View Relatedi need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI know this is a sooo basic question but I can not for the life of me remember how.....
when I am on a excel sheet I can not seem to move from quare to square qiththe arrow keys.
It just now takes me all the way to the left or all the way to the right and not from cell to cell from left to right.
I know its something rather simple yet I can not seem to figure this out.
I have no problem with this on 2003pro.
I require a macro to enable a selected shape to be moved from current cell location to relative position but 1 row up. eg topleft address = A4 and shift shape to topleft address = A3
View 5 Replies View RelatedI want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
So, I just started checking Excel Macros. I'm working on a quite large data base where I need to search for a given part number and then move N columns to the right and display the text inside that cell on a message box.
Here's what I got 'til now:
Private Sub M0016216_Command_Button_Click()
Cells.Find(What:="M0016216", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
ActiveCell.Select
[Code] ........
Is it possible to move data within brackets and the brackets themselves from one cell to another?
Eg. Audi A3 (Including S3) all models.
To remove (Including S3) from this cell and place it into another cell?
exist any function that do following?
I am on the row 100 in column G. I had a freeze the first row where i have hypertext and other function. I want add here (in the 1. row) something like hypertext, but i want to stay in the row where i was.
When i am on row 100 in column G and i want to create function which move my cursor to column W but in the same row (row 100 in this case).
Next time i will be in row 154 and i will want to move my cursor again in column W and use this same hypertext/function or what.
I have a filtered row that calculates values based on user input. I would like to take the calculated value of a cell in that row and place it as a static value in a different cell.
For example, the filtered row is row 85. The user inputs 5.5%. Cell AK85 calculates the value to be $100,000. Cell AK3 references the original row, which is 3. I would like to take the $100,000 value and place it in cell AK3 but as a static value and not based on a formula.
It's difficult to explain, the attached shows the situation better. Basically there's a picture that is somehow linked to a cell. But, you can update the picture or the cell and the other one gets updated.
View 3 Replies View RelatedAttached is a sample of what I am working with.
For some reason when pulling this report into excel, the description is under the part number and the ordering information is on the line with the part number. What I am trying to do is have the description move up one row and over one column if the value in C is blank on the same row. All of the information should be on one line. This report can have hundreds of records so I need some kind of looping code to get the end product where I need it.
example1.xlsm‎
I have over 6500 rows of data. In Columns A through C for each line I have data for boys name, and then similar data for the girls' name on the same line in columns D through F. I have inserted a blank line after each of the more than 6500 lines because I need to move the data in columns D through F down to the next line and over to columns A through C.
View 2 Replies View RelatedFilter from a cell.
If a cell is having the following description,
AUTHORITY SOLE,"UNIGO"BRAND,GR:31/40-125 CTNS
and from this how to filter
"UNIGO" to a new cell
GR:31/40 to a new cell and
125 CTNS to a new cell
This will place 31/40 under GR column , 125 under CTNS column
How do I after entering data into say cell A1 and jumping it to say cell F3 and enter data and then another and so on
View 2 Replies View Related