=IF(OR(Q136<O132,Q136>O132),Q136-O132,O132-Q136)
This does not seem to be working for me. I need to check one number against another and if the one cell is larger then the other subtract it or just the reverse.
I have this set of number..
987654.
What im trying to do is this..I read this number and check for the first number with the 2nd number. If its greater then i will swap it. Im trying to do this so that my number can be rearranged as 456789.
I have a list of numbers that I have to concatenate with another number depending on if it falls within the parameters and I don't know how to do a lookup on that. I currently am using a complex if/or/and statement which is too dificult to debug and extremely complex like this: if(OR(AND(a>=1,a<=10),AND(a>=20,a<=30)),concatenate(a,"123"),if(OR(AND(a>10,a<20),(a>30,a<40))),conc atenate(a,"456"),"a is not in the parameter")
is there a way to do a lookup for this?
Something else to throw into the mix, there are some ranges that shouldn't be there and return nothing so from 40-55, there shouldn't be a result.
also, there are some that are just one number (56 gets 789 but then at 57 it goes back to abc)
I'm writing a function that sums the values in a range of cells but some are errors due to my formula's. any way i can check if a value is a number in VBA?
View 2 Replies View RelatedIs there way in Excel VBA to check if a string contains a number, and then return TRUE or FALSE. Numbers can been anywhere in the string. See example below.
View 6 Replies View RelatedI'm looking for a formula to check whether a given number is between two other numbers.
Example: I have a list of data items which give the following info:
A.......B..........C.........D
ID# Group Low# High#
1001 food 12345 13960
1003 soap 27192 32245
2004 tires 93471 95532
2005 food 71174 76772
2006 soap 33183 36591
Such a list is many hundred of lines long.
Then I have other data which provides a Group ID and a product number, which number is likely to between the Low# and High# in the data list.
What I want is a formula to check whether the product number is between the Low# and the High#, AND that the Group matches.
Example: the data being supplied is Soap 28332. So, I want a formula to check through the data list, and if 28332 is between the Low# and the High# AND if the group SOAP matches, then give back the correct ID number.
Thus for the data Soap 28332, I would want the answer to be 1003, which is the ID # for soap in the given range.
A data listing of Food 73776 should give back the ID 2005, etc, etc. This list of data needing the correct ID# is thousands of lines long.
Thus I need a formula to check that the given number is within the low and high #, and that the group designation matches. If so, then give back the correct ID#.
i need code to check if number is "Initial Number" (3, 7 etc.)
View 9 Replies View Related1) check if in cell A1 there is a number. Something like
If .Cells(1,1).Value is number then ....
2) how to get the "code" of cell A1 in VBA (i.e =code(A1)).I tried
.Cell(1,1).Code
but it didn't work.
I am trying to improve my expense report template and need to check on the load if expense report number has been loaded correctly as well as if this report has been previously loaded. Expense report number format looks like this: AAA-BBBBBB-CC
Where:
AAA – Employee ID #
BBBBBB – End of the week date
CC – Weekly expense report number
For instance, 023-122008-01 means: Employee number 023, week ending date 12/20/2008, weekly expense report number 01. I would like to prevent/give warning of loading incorrect expense report number format, check for possible duplicates, and check if trying to load expense report belongs to the right person (by simply matching previously loaded in different cell of the same sheet employee ID and first three digits of just loaded expense report number. I think I know how to do all of these separate, but have no idea how to combine all three checks for one cell.
I would like to check a 4 column range to see if a particular number has been added to a range of number.
this is the formula that I wrote but it does not test beyond the 2nd column.
=IF(OR((MATCH(3,COLUMN_D)),(MATCH(3,column_c)),(MATCH(3,column_b)),(MATCH(3,Column_a))),3,"")
Does anyone have an different way of check for this?
I have this list with articles at work. It looks like this:
1
1
1
2
2
2
3
3
3
etc
I wish to find out if any number in a column appear more then 3 times, and if it does, return that number to be. Is this possible with a formula? I've tried, but didn't succeed.
Hi guys/gurls.. is there a way i can get the following check against range for orders which give result as invoiced(if within the range), duplicated(if 2 or more than 2 are on the orders list) & missing (which on not in the orders when checked against the range).
View 6 Replies View Relateda1 -> 2.333.33 "i want this to return as 2,333.33"
a2 -> 33.33 "i want this to retun 33.33"
a3 -> 45.555.55 "i want this to return 45,555.55"
i already asked this question and someone gave me this code -> substitute(a1,".","",1) which return to 2333.33 but the problem is for the a2 if i use the code it will return as "3333" which read as "3,333".
Is there any way that we can determine if the values have two decimal point before it will run the command?
I have a cell range that is passed as a String to a function, and within that function I need to extract only the Column letter. If it was just 1 letter it would be simple, but it may be 2, so does anybody know of a way of testing to see if the second character is a letter or a number?
View 5 Replies View Relatedi have number of cells as below and i need to make macro to check last character in each cells if text the result will be 0 and if number the result will be 1
A1 42SRY239Acd2
I use a userform to make sales data entries into a database. The userform contains textboxes for:
Invoice No.Invoice DateGrossVatNet The Invoice No. is the first entry box on the userform and it is important that users enter the correct format (which is alphanumeric).
It is also important that a checking is carried out to ensure that the Invoice Number being entered has not already been used.
I use the following code to ensure that the numbers are entered in the desired format:
Code:
Private Sub txtInv_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If txtInv.Value = vbNullString Then Exit Sub
If (Not UCase(Me.txtInv.Value) Like "ST###") And (Not UCase(Me.txtInv.Value) Like "ST####") Then
MsgBox "Non Valid Invoice Number.â€
Cancel = True
End If
End Sub
And this code is pasted lower down the VB editor window. And it seems to be working fine!
For the checking to ensure that the invoice number being typed into the textbox has not already been used, I use the following two codes combined together:
a) to check for invoice No.:
Code:
check for Invoice Number
If Trim(Me.txtInv.Value) = "" Then
Me.txtInv.SetFocus
MsgBox "Please Enter Invoice No."
Exit Sub
End If
b) And to it I add the following additional code for CHECKING that the no. does not already exist in the database (the invoice nos are located in Column A of the database):
Code:
Dim x
X= Application.Match(Me.txtInv.Value, Columns(1),0)
If Not IsError(x) Then
MsgBox Me.txtInv.Value & "Invoice Number Is Already Used"
Me.txtInv.SetFocus
Cancel = True
Exit Sub
End If
My problem with the second set of codes in (a) & (b) (for the Checking of already existing No.) is that the code allows the user to key in the Invoice No. and go through filling in the other textboxes. It is only after clicking the ‘Add’ button that a msgbox comes up to indicate that the ‘invoice no. is already used’.
I need a tweaking of the codes so that the moment an invoice no. that has already been used is typed into the textbox and the TAB button pressed, a msgbox will show up at that stage to indicate that the ‘Invoice no. is already used’. This will reduce time and avoid filling in the other textboxes and clicking the ‘Add’ button before the checking is done.
I am trying to work out if today is in a sequence of +30 days from a specific date (and not past a specific date)
so, for example i have a start date of 25/1/11 and an end date of 25/1/16.
i want to know if today falls as part of a 30 day cycal from the start date.
i need to be able to do it without working it maunally such as just "=25/1/11+30" and fill across.
Every month we have to reconcile our checks and then enter them into our application. We have an option in our application that we can do Check Number ranges. We are trying to find an away to have excel to put the checks in ranges either by a formula, a micro or a pivot tables. We have over 700 checks each month to reconcile.
View 9 Replies View RelatedI need to judge whether a number falls between a range of 2 numbers.
Ex:
A1=332.024 B1=349.956
C1=335.23 So D1 must give 1 (since between the range) else 0.
If C1=332.02 D1=0
If C1=349.9566 D1=0
If C1=332.024 D1=1
If C1=349.956 D1=1
What formula should be punched in D1?
I would like a function that checks an input number to see if it contains unique digits. If the digits are unique the output is 1 else the output is -1. Thus, supposing we call the function UNIQ(), we find UNIQ(15423) = 1 but UNIQ(154532) = -1. The input is always a positive integer.
View 7 Replies View RelatedSheet 1 holds aprox 30,000 lines of data, each line of data has values populated in columns A:P
Each row in column A holds a unique number (displayed as TEXT) made up of ddmmyy plus number in two digits, for exampls 18011209
how using code I can check each number through column A for duplicates and delete that particular row of data when found
I'm looking for a function which will check if the cell value is a valid UK registration number plate format.
True if it is, False if it isn't.
I've tried myself and had a look around but am unable to find a solution to my problem.
If also possible, if false, to make to necessary amendments to make it a valid format...ie If some lower case values, make them upper case, if there is a space entered, remove it, if a O is entered instead of a 0, correct it and show the corrected value when the function is run. For all that it can't do that with, then leave as False.
I understand the second part may not be possible, just identifying whether or not the value is a valid format. I have something similar which does this for UK postcodes, but am hitting a brick wall trying to do the same for UK registration number plates.
What i'm trying to do is to check a large number of cells, if "0" is written down in that cell it stays as it is and if the number is different from "0" i want to put a "1" instead.
View 5 Replies View Relateda1=aaa
a2=111
a3=222
a4=333
a5=bbb
a6=444
a7=555
a8=ccc
a9=909
a10=234
if a1 = aaa then copy a1 to b1 until the cell =bbb
if a5= bbb then copy a5 to c1 until the cell =ccc
if a8= ccc then copy a8 to d1 until the cell = ddd.........
The following code displays the message box and loads a userform if the Active cell offset 1, -1 when within G column equals "LAST ROW".
[Code] .....
How can I change it so instead it performs those same actions (displaying the message box, and loads the userform) if the number of rows between the last data entry in G and the last data entry in F is equal to 0?
I need help to this : When i type a number to a cell and press enter , i want to check if this number exist in a range of cells (in sheet 2) , and if exists , excel show me a message. Actually i use it for my *** club. Number is the client code. When i writte 50 in a cell , i need from excel to check if this client own me money , and show me some message..
View 8 Replies View RelatedI need two formulas that can do the folowing:
• check whether a cell contains text, if so, then trim all spaces and get result. If it doesn't contain text then set the result as blank.
• check whether THE CELL T13 contains text, if it does then check the adjected cell (U13) if it contains text, if so, then concatenate the two cells with a space between them and remove any other spaces. If the T13 doesn't contain text, the set the result as blank. Also, I have another question: how could I use the counta formula without counting spaces?
Please see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls‎
I need a solution for this situtaion! Iam using a french version of excel2003!
I have #DIV/0! in P24 (i.e an error value) So I need to check in Q24 such that if (P24=#DIV/0!,0,P24). I need to have a logical formula for this one!
I have a direct mail company and lock in certain areas for a certain amount of time for my clients.
I want to be able to check a hand full of zip codes to see if they are aviable for new clients.
The lock in period is 60 days.
For a zipcode to be available it can not be in my list or has passed the 60 day expiration.
Attached file.