On the attached spread sheet here is what I am trying to do. In B2 I will either enter D (digital label) or F (Flexo label). With that than if a D is entered nothing else will happen with in spread sheet but if F is entered D23:Q40 will need to be cleared out and blank.
View 5 RepliesI have included the table. What I want to do is in a user form pick a county ie Devon, Then by clicking "go" all entries that contain "Devon" are then copied to a " sheet 2" I don't want to use the Ctrl-F
View 2 Replies View RelatedVBA script I can run on a worksheet that will clear certain cells when I input a fresh value into a separate cell please? For example: By entering a new value into A1, cells B1 and C1:C3 are automatically reset to empty.
View 5 Replies View RelatedI have an month input in cells B2 (user can enter values from 1-5)
I then have a data table that has month 1,2,3,4,5 running across range G9:K9. the data is held in range G10:K19.
So if user types in 4 in B2, what should happen is that months 1,2,3 and 4 the data for these months should be cleared and data in month 5 moves forward into month 1.
So basically, anything left of the month entered is B2 should be cleared and replaced with anything right of the month in B2.
1
2
3
4
5
£11
£133
£29
£193
£100
[Code] ........
I am working on a sheet called 2005, with "Jan" entered into cell C4. I want to reference cells on the sheet called Jan2005 using a function that points to C4 and adds "2005".
View 2 Replies View RelatedI have a spreadsheet that I have created as a door schedule for faculty members at our institution of higher education. The intention is for them to fill-in their office hours and courses along with a few other bits of information. One sheet should have their teaching and office hours and one sheet should not.
These are the cells that should be cleared once the sheet has been duplicated (F30, F31, G30, G31). Once the sheet is duplicated and those two cells' contents has been deleted, both sheets should be printed. Ideally, all of this would be initiated by clicking a hyperlink or something like that.
I am copying a large sheet into a spread sheet. The problem is one of the columns contain numbers with some cells having an asterisk at the end of the number. This causes problems with the formulas on other sheets that use this data. Can I use a formula or what is the best way to eliminate the "*".
View 4 Replies View RelatedOn Sheet 1 I have Data Validation Lists set up. On Sheet 2 I have the information populating from what is entered on Sheet 1, only problem is...when I don't have anything entered in the cell(s) on Sheet 1 then the cell(s) on Sheet 2 reflect 0. I would like the cell(s) to remain blank if nothing is entered on Sheet 1.
View 4 Replies View RelatedI am looking to create a macro to copy sheet Day(1) and call it Day(2). I would like Y3 to increase one day with the date, I would like Y4 to increase day and 1 and clear data from G35-G65.
View 4 Replies View RelatedThe worksheet (Payments) contains a list that allows the user to input accounting transactions. Almost every input cell contains a formula or data validation enabling selection from a dropdown.
The worksheet feeds the data to 3 separate spreadsheets (Debits / Credits / VAT) and the formulas for that are contained within dynamic ranges in the other 3 sheets. A command button macro then feeds that data from the 3 sheets to the Master sheet. This all works perfectly.
After the macro is run and the data is copied to the Master sheet, I would like all of the data in the 4 other sheets to be cleared without losing the formulas and data validation, ie so that the sheets are empty and clear for the next batch of inputs.
I am trying to write a macro to find all cells that are returning cell errors (ie: #REF!) within a named range, to select only those cells, and then to clear the contents of only these cells. It is my understanding that replacing or altering the value is not an option because doing so will return a "" string value, instead of a clear cell. Replacing the cell's contents with a =na() is also unacceptable...these cells to be completely clear. I was unable to piece together a macro from searching around this site and thought it would be best to just ask.
View 4 Replies View RelatedI am making a buiness card request form, which I have attached. On the Master Sheet (Sheet 1), the user enters in his/her personal data, such as his name address, phone number, etc. After he/she finished entering all the relevant data, Business Card Layout (Sheet 2) automatically populates and shows the user what their business card will look like.
Everything works fine, however I just realized that the contact information might vary from person to person. Right now, a person can enter 5 different contact information, but most of them will probably only choose four.
I wanted to know how to shift the cells down if the user does not fill out one of the contact information.
I have a spreadsheet with names on and I need to check to see if the surname in column C, also appears in column A&B.
I would like to list, in another sheet, the names that are in Column C that are NOT in A&B. Then I can see what data is missing.
I have a spread sheet (sheet2) that runs an add-in and does some calculations and arrives at a result which is a number in cell P6. All I have to do is type in a Stock Symbol in cell A1, and the sheet runs the add-in, calculation automatically. If I change the symbol in A1, the sheet re-runs the add-in/calculation and gives me the result for the new stock in cell P6.
Sheet 1, has a list of stocks, indexed in Column A.
Rather than me changing the symbol manually in sheet 2 cell A1, how can I automate it such that it will run the functionality automatically for each symbol in Sheet1 column A sequentially and then tabulate the results for each stock/symbol in Sheet 1 column B.
I tried to attach the sheet/book herewith, but could not. It is less than 100KB in size
I have a spreadsheet that requires an entry into an Input Box before the rest of the workbook is created. Users click on the button, an Input Box appears and they must enter data. Once the data is entered and they click OK the file is created and saved to their local drive with the name ".xls" and then the sheet closes.
What I want is to have the file that is created be named as whatever the user enters into the Input Box field.
I have a spreadsheet filled with formulas that depend on a value being entered into A2, A3, A4, etc... So column A starting at A2 is where I will manually input a number and the formulas I have in columns B, C, and D will import information from another sheet based off what is put in column A. In column D the formula I have to import data
is =IFERROR(VLOOKUP(A2,Master!C:M,11,0),"").
This will import another number. Additionally in column D, I have conditional formatting that will return a red, yellow or green light based off the rule I have in place. Everything works fine, the only problem is that column D has a green light all the way down even without a value being placed in column A. I would like to find out a way to keep the cells in column D blank until a value is entered in column A. Also, if I go back and delete the value in column A, I would like the corresponding cell in column D to go back to blank as well.
I was trying to compare string from excel spread sheet to a value I am not getting any output. It is not working
View 4 Replies View RelatedIs there a way to lock out a spread sheet if it is sent to an unauthorized e-mail address or forwarded to another e-mail address?
View 9 Replies View RelatedI have a few hundred work orders done in Excel. Each spread sheet is a seperate file but all are identical in structure (basic order form). I need to change the value in the same cell on all the forms (manager's name needs to be changed on all our forms).
Question: How do I do this without having to open and edit all five thousand forms?
I would like to present the user with an input box asking him to enter a numerical value greater than 0.
Then I would like the code starting with row 10 and consult the vaues in column O, and only display the rows that have number in it less than or equal to the number in the input box. I was hoping it would involve a filter.
I would also need a macro to display all of the rows again.
If this is too hard, how about copying the results to a new worksheet along with the labels in row 9?
I have an excel workbook with about 20 sheets. I need to input the same formula in to every sheet for example.
Cell A197 = Today()
Cell A198 = "Stock "&Text(A197,"dd-mm-yyyy)
Cell A199 = Issued cheques
Cell A200 = Voided cheques
Cell A201 = Received cheques
[Code] ...........
The issue is that every sheet is at different cell numbers so my the formula above is incorrect.
I have tried to record a macro for each sheet within the workbook but this fails.
I'm trying to create code that will clean up a budget template of numeric inputs so it can be reused. This is as close as I can get but the code still isn't right.
[HTML]Sub ClearSheets()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
ws.ActiveSheet.UsedRange.SpecialCells(xlCellTypeFormulas, 21).ClearContents
Next ws
End Sub[/HTML]
formular to show a coinage total in a spread sheet im sure its to do with < > but new to this and dont have a clue any help apreciated. This is what i am trying to achieve.
excel formula If A1= 10 Then B2= 0
If A1 =7 Then B2 = -3
If A1=13 Then B2= 3
I am working towards creating a spreadsheet for making a budget for a film + a system to monitor the expenses vs budget allocated on a day to day basis (to ensure the budget is not being crossed).
View 3 Replies View RelatedI would like to calculate the average number of hours worked per day in a particular week from my time sheet (in "Google spread sheets"). Daily hours are calculated in hr:min:sec format. Days not worked display 0:00:00. The formula I use to calculate total hours worked that weeK is for row 9 as follows: =INT( SUM(G9,K9,O9,S9,W9) )*24+LEFT(TEXT( SUM(G9,K9,O9,S9,W9) ,"HH:mm"),2)&TEXT( SUM(G9,K9,O9,S9,W9) , ":mm:ss")
How do I calculate the average number of hrs and minutes worked per day (excluding days not worked, cells containing 0:00:00)
I need to create a spread sheet that in Col A has 3 variables, each of which I need to triger 1)fill of that row, 2)different formula's in different columns within that row. Is this possible in excel?
View 9 Replies View RelatedIm trying to import data from a plumbing supply website to an excel spread sheet.
On the supply house web site, for each part catgory there are corresponding pages containing a price list data table.
there are from 1 to 3 pages (price list data tables) for each part category.
i can import data from page 1 and page 3 fine. When i try to import data form page 2, it returns no data, or imports page 3 (instead of 2)
I spoke to the person who designed the website and he said that it was a problem within excel and not a problem with his program. (said it was a problem with excel not being able to recognize the page)
Public Sub ListMyFiles()
Dim fso As New FileSystemObject
Dim fso_Folder As Folder
Dim fso_File As File
Dim file_count As Long
Set fso_Folder = fso.GetFolder("S:SHARED All of TransportationTraffic AssessmentMultiway Warrants")
file_count = 1
For Each fso_File In fso_Folder.Files
file_count = file_count + 1
Cells(file_count, 1).Value = fso_File.Name
Next fso_File
Set fso = Nothing
End Sub
This works great, but is there a way for the macro to recognize the file names that have already been added to the spread sheet and only return new ones that have been added to the folder?
I want to concatenate two columns in a separate tab but when I do, the values appear as ....
View 9 Replies View RelatedI am currently working on a very large spreadsheet with a current size of 94mb. So obviously I have problems running and using it.
My question is a general one, I need to understand better why a spreadsheet gets so large. It has 55 tabs with the largest having 1000 rows. It also links in a number of places between sheets but also to external locations. I have moved all files that it is linked to in to the same file.
I am at the point where I am thinking about starting again! And I was wanting some tips or even a recommendation of a book that could help me optimize my spreadsheet going forward so to increase the speed but also reduce the size.