I am working towards creating a spreadsheet for making a budget for a film + a system to monitor the expenses vs budget allocated on a day to day basis (to ensure the budget is not being crossed).
View 3 RepliesIn the attached spreadsheet i have a budget amount, billed to date, %complete, %remaining and forecast figure. What i am trying to do is estimate the forecast spend vs the budget or billed to date and percent remaining. I am struggling with how to do this based on in some cases the budget is already overspent but the %complete is less than 100%. What i really want to do is create a forecast based on the billed to date or budget depending on which is greater and work out estimated spend based on whether the task is complete or there is still a % remaining.
View 2 Replies View RelatedI am trying to create a spreadsheet that will keep track of budget spent and budget remaining.
I need the values to take what is spent from expenses claim forms that are filled out,
Each budget category has a code and within that code there are sub heddings
I am copying a large sheet into a spread sheet. The problem is one of the columns contain numbers with some cells having an asterisk at the end of the number. This causes problems with the formulas on other sheets that use this data. Can I use a formula or what is the best way to eliminate the "*".
View 4 Replies View RelatedI have included the table. What I want to do is in a user form pick a county ie Devon, Then by clicking "go" all entries that contain "Devon" are then copied to a " sheet 2" I don't want to use the Ctrl-F
View 2 Replies View Related I have a spreadsheet with names on and I need to check to see if the surname in column C, also appears in column A&B.
I would like to list, in another sheet, the names that are in Column C that are NOT in A&B. Then I can see what data is missing.
I have a spread sheet (sheet2) that runs an add-in and does some calculations and arrives at a result which is a number in cell P6. All I have to do is type in a Stock Symbol in cell A1, and the sheet runs the add-in, calculation automatically. If I change the symbol in A1, the sheet re-runs the add-in/calculation and gives me the result for the new stock in cell P6.
Sheet 1, has a list of stocks, indexed in Column A.
Rather than me changing the symbol manually in sheet 2 cell A1, how can I automate it such that it will run the functionality automatically for each symbol in Sheet1 column A sequentially and then tabulate the results for each stock/symbol in Sheet 1 column B.
I tried to attach the sheet/book herewith, but could not. It is less than 100KB in size
I was trying to compare string from excel spread sheet to a value I am not getting any output. It is not working
View 4 Replies View RelatedIs there a way to lock out a spread sheet if it is sent to an unauthorized e-mail address or forwarded to another e-mail address?
View 9 Replies View RelatedI have a few hundred work orders done in Excel. Each spread sheet is a seperate file but all are identical in structure (basic order form). I need to change the value in the same cell on all the forms (manager's name needs to be changed on all our forms).
Question: How do I do this without having to open and edit all five thousand forms?
formular to show a coinage total in a spread sheet im sure its to do with < > but new to this and dont have a clue any help apreciated. This is what i am trying to achieve.
excel formula If A1= 10 Then B2= 0
If A1 =7 Then B2 = -3
If A1=13 Then B2= 3
I would like to calculate the average number of hours worked per day in a particular week from my time sheet (in "Google spread sheets"). Daily hours are calculated in hr:min:sec format. Days not worked display 0:00:00. The formula I use to calculate total hours worked that weeK is for row 9 as follows: =INT( SUM(G9,K9,O9,S9,W9) )*24+LEFT(TEXT( SUM(G9,K9,O9,S9,W9) ,"HH:mm"),2)&TEXT( SUM(G9,K9,O9,S9,W9) , ":mm:ss")
How do I calculate the average number of hrs and minutes worked per day (excluding days not worked, cells containing 0:00:00)
I need to create a spread sheet that in Col A has 3 variables, each of which I need to triger 1)fill of that row, 2)different formula's in different columns within that row. Is this possible in excel?
View 9 Replies View RelatedIm trying to import data from a plumbing supply website to an excel spread sheet.
On the supply house web site, for each part catgory there are corresponding pages containing a price list data table.
there are from 1 to 3 pages (price list data tables) for each part category.
i can import data from page 1 and page 3 fine. When i try to import data form page 2, it returns no data, or imports page 3 (instead of 2)
I spoke to the person who designed the website and he said that it was a problem within excel and not a problem with his program. (said it was a problem with excel not being able to recognize the page)
Public Sub ListMyFiles()
Dim fso As New FileSystemObject
Dim fso_Folder As Folder
Dim fso_File As File
Dim file_count As Long
Set fso_Folder = fso.GetFolder("S:SHARED All of TransportationTraffic AssessmentMultiway Warrants")
file_count = 1
For Each fso_File In fso_Folder.Files
file_count = file_count + 1
Cells(file_count, 1).Value = fso_File.Name
Next fso_File
Set fso = Nothing
End Sub
This works great, but is there a way for the macro to recognize the file names that have already been added to the spread sheet and only return new ones that have been added to the folder?
I want to concatenate two columns in a separate tab but when I do, the values appear as ....
View 9 Replies View RelatedI am currently working on a very large spreadsheet with a current size of 94mb. So obviously I have problems running and using it.
My question is a general one, I need to understand better why a spreadsheet gets so large. It has 55 tabs with the largest having 1000 rows. It also links in a number of places between sheets but also to external locations. I have moved all files that it is linked to in to the same file.
I am at the point where I am thinking about starting again! And I was wanting some tips or even a recommendation of a book that could help me optimize my spreadsheet going forward so to increase the speed but also reduce the size.
I need a formula to figure the 5 lowest of last 6 sores, since everyone doesn't play every week there would be blank spaces and it needs to just give me the average if they have less than 6 scores!
I have manipulated the formulas until I am blue in the face and cannot get it to work;
I am trying to put together a projection spread sheet for a client for cash flow purposes. I have it laid out but I cannot wrap my head around the formula and I've tried a few. Here it is.
A1: Client Name B1: Invoice Date C1: Projected Due Date ( I have 45 days added to B1) D1: Invoice Amount E1: Jan F1: Feb G1: March H1: April I1: May J1: Juneetc...
I am trying to forcast out the invoice collection date (C1). So basically in the month of June column I am trying to say if C1 falls between June 1 & June 30th then it should equal D1 (the amount due in that month). So if the invoice has a due date (C1) that falls in that particular month than I am forecasting the cash flow in the month it's collected.
On the attached spread sheet here is what I am trying to do. In B2 I will either enter D (digital label) or F (Flexo label). With that than if a D is entered nothing else will happen with in spread sheet but if F is entered D23:Q40 will need to be cleared out and blank.
View 5 Replies View RelatedI am fairly new to macros and I am currently working on a project where I would like to create a 2 buttons which will filter by date and by owner. The spread sheet I have is fairly large and is added to weekly.
I have two objectives that I am trying to reach:
First I need to filter for all past due task items from the Thursday of the week I am working in back and for a specific person (owner) by the finish date
Second I need to filter for upcoming tasks one week out for a specific person (owner). The objective of this is so that on any given day a user can find any upcoming tasks that are due one week out.
If this is not an option. My thought was to create an input box where the user can input the date and the information on the spread sheet will pull all past due items or upcoming tasks. These two items need to pull seperatly not together.
I know I can create a macro by autofiltering by columns however I am trying to avoid having to go in and change the date each week.
Start date is column E
Finish date is column F
Owner is column L
I am setting up a spread sheet to calculate call duration it would be a great help if data could be entered using one hand IE use decimal point on the number pad instead of the colon is this possible. I will need to subtact start time from end time to get the duration
View 9 Replies View RelatedI have a large amount of data in a single spread sheet. Each row has a branch number on it, there are multiple branch numbers. Each branch number is located in Column A. I want to separate this sheet and put all of the branch numbers into their own sheet. how to do this without manually copying and pasting?
View 9 Replies View RelatedEach sheet has the same basic formatting. A1 contains a name. B1, C1, D1 are column headers. B2:B is data. C2:C is data and always stops at the same row B2:B range does. The only differences between the sheets is that they might not stop at the same row. I want a macro that merges A1 vertically as shown in my spread sheet to the end of column B and C. I want a border around the merged data, as well as around the B data and the C data individually.
View 3 Replies View Relatedi have a spread sheet which has a very complex simulaton in it. excel is not the ideal place for it, but it is not possible to port it wholesale to something more sensible. i have modified the code so that it is possible to run two copies of the spread sheet (in two seperate excel processes) at one time. Due to the dual core nature of the machine this has almost no overhead.
I have created a controlling spread sheet that is cabable of launching multiple copies of the simulation and starting the code executing. the problem is the controlling spread sheet always waits for the code to return before it continues, hence it would open two seperate versions of excel, start the first simulation executing and then wait until it completes before starting the next one. is there any way of starting a function in another work book without waiting for the execution to complete?
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
I have an excel template that needs to be copied multiple times and each sheet needs be named according to a list in an excel spread sheet. I also have a formula in the template that needs the value copied instead of the formula.
I got this script from an site and tried it. It runs but I don't see any spread sheets.
strComputer = "."
Set objWMIService = GetObject ("winmgmts:\" & strComputer & "
ootcimv2")
I have some experience with excel, but until now have not ventured into VBA and macros.
I have a workbook which will have the following sheets:
1.Absence Summary sheet - Summarises data from each employee's individual sheet.
2. Template Sheet - A sheet formatted as an absence record sheet, but without data.
3. Individual employee Absence record sheets - Based on the Template sheet.
I have read with interest the various posts and help files on User Forms & Macros, but have got a bit stuck.
My Aim: ....
I am trying to figure out the best way to go about creating a new sheet from an existing sheet which has column titles. I guess the best thing for me to do is give an example of what I would like to have accomplished.
sheet A has the following:
title1 title2 title3 title4 title5
a b c d e
I would like sheet B to be created with:
sometitlez sometitley sometitlex
b d e
so basically, I would like to map tiltel2 to sometitlez, title4 to sometitley, and title5 to sometitlex
the reason I am doing this little project is so that I can import the new worksheet to a mysql database with only the necessary information. Please note that sheet A may contain many rows and the converted sheet B will have many rows too.
We have hourly amounts remaining on projects, we want to project cost at 40 hour work weeks and 50 hour work weeks. We simply multiply the 40 hour budgets times the straight time rate, but we need to calculate the over time on the 50 hour budgets.
examples:
600 hours on 40 hour budget at $25 and hour is $15,000. However on a 50 hour budget it would include 480 straight time hours and 120 overtime hours for a budget of $16,500.
Our data is hourly bugets in column "A". In column "B" we did =A3*straighttimerate. Is there a formula that can calculate 40hrs straight time then 10hrs over time until the budget runs out? We are working with Microsoft Office Proffesional 2007 with Excel 2007 but need to remain compatible with Excel 2003.
Budget (hours)straight time ($25)over time ($37.5)240$6,000.00?4652$116,300.00?152$3,800.00?258$6,450.00?645$16,125.00?