I would like to calculate the average number of hours worked per day in a particular week from my time sheet (in "Google spread sheets"). Daily hours are calculated in hr:min:sec format. Days not worked display 0:00:00. The formula I use to calculate total hours worked that weeK is for row 9 as follows: =INT( SUM(G9,K9,O9,S9,W9) )*24+LEFT(TEXT( SUM(G9,K9,O9,S9,W9) ,"HH:mm"),2)&TEXT( SUM(G9,K9,O9,S9,W9) , ":mm:ss")
How do I calculate the average number of hrs and minutes worked per day (excluding days not worked, cells containing 0:00:00)
I have an excel template that needs to be copied multiple times and each sheet needs be named according to a list in an excel spread sheet. I also have a formula in the template that needs the value copied instead of the formula.
I got this script from an site and tried it. It runs but I don't see any spread sheets.
I got a problem with a time calculation, if it's even possible.
I want to calculate the amount of hours that have been woork in a slot.
Example: First slot is from 08:00am till 17:00pm, time cost 100% Second slot is from 1700am till 24:00, time cost 110% Third slot is from 24:00 till 08:00 am, time cost 120%
I'm working from 08:00am till next day 01:00am So my hours are: 9 in slot 1, 7 in slot 2, 1 in slot 3.
I am copying a large sheet into a spread sheet. The problem is one of the columns contain numbers with some cells having an asterisk at the end of the number. This causes problems with the formulas on other sheets that use this data. Can I use a formula or what is the best way to eliminate the "*".
I have included the table. What I want to do is in a user form pick a county ie Devon, Then by clicking "go" all entries that contain "Devon" are then copied to a " sheet 2" I don't want to use the Ctrl-F
I have a spread sheet (sheet2) that runs an add-in and does some calculations and arrives at a result which is a number in cell P6. All I have to do is type in a Stock Symbol in cell A1, and the sheet runs the add-in, calculation automatically. If I change the symbol in A1, the sheet re-runs the add-in/calculation and gives me the result for the new stock in cell P6.
Sheet 1, has a list of stocks, indexed in Column A.
Rather than me changing the symbol manually in sheet 2 cell A1, how can I automate it such that it will run the functionality automatically for each symbol in Sheet1 column A sequentially and then tabulate the results for each stock/symbol in Sheet 1 column B.
I tried to attach the sheet/book herewith, but could not. It is less than 100KB in size
I have a few hundred work orders done in Excel. Each spread sheet is a seperate file but all are identical in structure (basic order form). I need to change the value in the same cell on all the forms (manager's name needs to be changed on all our forms).
Question: How do I do this without having to open and edit all five thousand forms?
formular to show a coinage total in a spread sheet im sure its to do with < > but new to this and dont have a clue any help apreciated. This is what i am trying to achieve.
excel formula If A1= 10 Then B2= 0 If A1 =7 Then B2 = -3 If A1=13 Then B2= 3
I am working towards creating a spreadsheet for making a budget for a film + a system to monitor the expenses vs budget allocated on a day to day basis (to ensure the budget is not being crossed).
I need to create a spread sheet that in Col A has 3 variables, each of which I need to triger 1)fill of that row, 2)different formula's in different columns within that row. Is this possible in excel?
Im trying to import data from a plumbing supply website to an excel spread sheet.
On the supply house web site, for each part catgory there are corresponding pages containing a price list data table.
there are from 1 to 3 pages (price list data tables) for each part category.
i can import data from page 1 and page 3 fine. When i try to import data form page 2, it returns no data, or imports page 3 (instead of 2)
I spoke to the person who designed the website and he said that it was a problem within excel and not a problem with his program. (said it was a problem with excel not being able to recognize the page)
Public Sub ListMyFiles() Dim fso As New FileSystemObject Dim fso_Folder As Folder Dim fso_File As File Dim file_count As Long
Set fso_Folder = fso.GetFolder("S:SHARED All of TransportationTraffic AssessmentMultiway Warrants") file_count = 1 For Each fso_File In fso_Folder.Files file_count = file_count + 1 Cells(file_count, 1).Value = fso_File.Name Next fso_File Set fso = Nothing End Sub This works great, but is there a way for the macro to recognize the file names that have already been added to the spread sheet and only return new ones that have been added to the folder?
I am currently working on a very large spreadsheet with a current size of 94mb. So obviously I have problems running and using it. My question is a general one, I need to understand better why a spreadsheet gets so large. It has 55 tabs with the largest having 1000 rows. It also links in a number of places between sheets but also to external locations. I have moved all files that it is linked to in to the same file. I am at the point where I am thinking about starting again! And I was wanting some tips or even a recommendation of a book that could help me optimize my spreadsheet going forward so to increase the speed but also reduce the size.
I need a formula to figure the 5 lowest of last 6 sores, since everyone doesn't play every week there would be blank spaces and it needs to just give me the average if they have less than 6 scores!
I have manipulated the formulas until I am blue in the face and cannot get it to work;
I am trying to put together a projection spread sheet for a client for cash flow purposes. I have it laid out but I cannot wrap my head around the formula and I've tried a few. Here it is.
A1: Client Name B1: Invoice Date C1: Projected Due Date ( I have 45 days added to B1) D1: Invoice Amount E1: Jan F1: Feb G1: March H1: April I1: May J1: Juneetc...
I am trying to forcast out the invoice collection date (C1). So basically in the month of June column I am trying to say if C1 falls between June 1 & June 30th then it should equal D1 (the amount due in that month). So if the invoice has a due date (C1) that falls in that particular month than I am forecasting the cash flow in the month it's collected.
On the attached spread sheet here is what I am trying to do. In B2 I will either enter D (digital label) or F (Flexo label). With that than if a D is entered nothing else will happen with in spread sheet but if F is entered D23:Q40 will need to be cleared out and blank.
I am fairly new to macros and I am currently working on a project where I would like to create a 2 buttons which will filter by date and by owner. The spread sheet I have is fairly large and is added to weekly.
I have two objectives that I am trying to reach:
First I need to filter for all past due task items from the Thursday of the week I am working in back and for a specific person (owner) by the finish date
Second I need to filter for upcoming tasks one week out for a specific person (owner). The objective of this is so that on any given day a user can find any upcoming tasks that are due one week out.
If this is not an option. My thought was to create an input box where the user can input the date and the information on the spread sheet will pull all past due items or upcoming tasks. These two items need to pull seperatly not together.
I know I can create a macro by autofiltering by columns however I am trying to avoid having to go in and change the date each week.
Start date is column E Finish date is column F Owner is column L
I am setting up a spread sheet to calculate call duration it would be a great help if data could be entered using one hand IE use decimal point on the number pad instead of the colon is this possible. I will need to subtact start time from end time to get the duration
I have a large amount of data in a single spread sheet. Each row has a branch number on it, there are multiple branch numbers. Each branch number is located in Column A. I want to separate this sheet and put all of the branch numbers into their own sheet. how to do this without manually copying and pasting?
Each sheet has the same basic formatting. A1 contains a name. B1, C1, D1 are column headers. B2:B is data. C2:C is data and always stops at the same row B2:B range does. The only differences between the sheets is that they might not stop at the same row. I want a macro that merges A1 vertically as shown in my spread sheet to the end of column B and C. I want a border around the merged data, as well as around the B data and the C data individually.
i have a spread sheet which has a very complex simulaton in it. excel is not the ideal place for it, but it is not possible to port it wholesale to something more sensible. i have modified the code so that it is possible to run two copies of the spread sheet (in two seperate excel processes) at one time. Due to the dual core nature of the machine this has almost no overhead.
I have created a controlling spread sheet that is cabable of launching multiple copies of the simulation and starting the code executing. the problem is the controlling spread sheet always waits for the code to return before it continues, hence it would open two seperate versions of excel, start the first simulation executing and then wait until it completes before starting the next one. is there any way of starting a function in another work book without waiting for the execution to complete?
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Normally if you want to create a copy of a sheet what we do is :
Right click on the tab sheet > click on Move or copy > select (move to end) > check box Create a copy > click ok.
Now its very tedious if i have to copy the sheet lets say 50 times using this method. Perhaps there is another shorter way that will instantly create a copy of the sheet in the same workbook?
