writing a formula for the situation below,
In column "A1" i have the formula =C8. I now need to copy this formula across to column "B1" to get =C9 and also copy it across to column "C1" to read =C10.
So the row number should be increasing by 1 and the column remanin constant.
formula to put in microsoft excel 2003 to increase a number by 10%, so for example, 20 by 10%.
View 10 Replies View RelatedI have a test due in the morning, and I really need this question answered ASAP, if anyone could. I need to create an IF formula for this situation: the standard Mhz is 500. Give 55.00 for that standard. But for every increase of of Mhz, give 25.00 per 100 increase.
View 2 Replies View Relatedwhat i need is a macro to run when I print a form. I am making a job card with a unique number on it ie: 100. when I print the form, I then need the 100 to change to 101 and so on. I cant work this one out.
EDIT - Ive attached my work in progress. It is for a computer repair shop. I have a few macros in there as I need to email a copy of the workbook too.
when you open the workbook, you will see the job number in red. I just need a macro tht will increase that number +1 every time it runs. I also need the email macro to rename the workbook to the customer name input in cell B4 - but I think im best to post this request in a new thread?
I have data to find standard deviation from a1:a5
So use a formulae to do the same.
I want to increase range automatically when i put a number in a6 and so on.
in cell A1 I have a ref no. eg aa/01/bb
in cell A2 I have a ref no. eg aa/02/bb
only the middle number increases in the reference each time eg: /01/
is there a formula that can achieve this or am i doomed to manual input, I have made a few attempts but cannot work it out.
I need to be able to select a certain number (from, say, 1-20) from a drop down menu, which will decide a number of rows (filled with data) on the next sheet. As I prefer not to give anyone the sheet I'm actually working on I made a quick look-a-like which might explain this better.
A and B are different scenarios, with different values in the fake drop-down menu I made. Just to pass on the understanding of what I want the values to do. If putting a drop-down menu there is troublesome, then I can live without them. But entering a certain value in the field and getting that number of rows for a certain product is what I need. I tried searching for a function/macro to use for this, but I dont know what exactly to look for. Name, etc
I created an receipt template in excel. How can I have it increase the receipt invoice number by 1 every time I open this template? For example the first receipt is 100, I want the second receipt to be 101, and so on.
View 4 Replies View RelatedHow can i format my excel spreadsheet cell so that a number
10,000,000
displays as
10
I am trying to write a program that needs to select a different cell everytime it is ran. For example, this month when it runs I need it to select cell BL137. Next time it is ran it will need to select cell BL138. Month after BL139. The cell it selects will always be in the same column (column BL) and the cell number always increases by the same amount (1).
View 6 Replies View RelatedI have set the check boxes for each line. I would like to have the today date to appear after clicking the check box on the next right cell. Do I have to use IF for this one?
ALSO I want the number to count up after click the check box. For example:
Name:
Bob (assigned)- 5
(completed)- 4
Every number of completed line increases every time each box is clicked. How can I do that?
I have a macro that increase a cell number and one that decreases a cell number, heres my code:
Code:
Sub Macro1()
Dim t
t = Split(Worksheets("Sheet1").Range("d5").Text, "/")
t(0) = Format(t(0) + 1, "0")
Worksheets("Sheet1").Range("d5") = Join(t, "/")
[Code] .......
So they do exactly what i want them to do but i want to put a limitation on them, so say the number in the cell is 0 then i dont want it to be able to subtract from it anymore, and say the number is 20 i dont want it to be able to add any more, i tried to put if statments into the code but no luck.
I have many data in a worksheet named "Table" with "Item" in column A and "Reference" in column B. For each change of item, I need to assign a reference number with a prefix. Below is a sample of the data.
Column A Column B
Item Reference
Orange R9
Orange R9
Orange R9
Apple R10
Apple R10
Apple R10
Mango R11
Mango R11
The starting reference number is not fixed. It could start from 8 or 10.
Thought it would be possible to automate this process using vba.
I have multiple worksheets (too many, actually!) and each worksheet is a record. I need to enter a Record Number into B5 of each sheet. The Record Number doesn't start at 1. I'd like to enter a number into the first sheet and the rest of the sheets to increase by 1. However, I only need to do this to some sheets.
View 9 Replies View RelatedCan you increase the number of fields shown in the list so that you don't have to scroll through the entire list?
View 2 Replies View RelatedIs there any keyboard shortcut to increase or decrease the number of decimals shown directly (I mean without having to use ctrl + 1... etc )
View 7 Replies View RelatedHaving an issue with copying down.
Workbook 1 has data vertical
Workbook 2 has data horizontal
I need the formula in Workbook 1 to pull from the respective date in workbook 2, or just a simple formula increasing the column by 1 for each row.My issue is that when i copy down, the column never increases, it stays on the same one.Example is attached.
I am trying to create a spreadsheet that will automatically increase the work order number by 1. The cell will always be in the same place. The idea is that when the file is opened it populates the number. After being closed and reopened the number will be 1 higher than the previous.
The page will reused by various people to create and print work requests for my mechanics, I want it to assign the W/O automatically.
I need an OFFSET function to start off by moving down 1 row from the starting point and then on the next run through the loop, to move down 2 rows, then 3 rows, etc.
Code:
Workbooks(Thisname).Worksheets("Run Set Up").Range("Duration").Offset(1, 0).Value = Workbooks(Filename2).Worksheets("Front Page").Range("T20").Value
This is what I'm working with. At the moment, I have the value for the number of rows to move set to 1 because I can't figure out how I'd accomplsih what I need.
I need to do the following:
If column X is less then < £1000 will have a 15% increase, those less than < £1500 a 12 % increase and any figure greater than > £1500 a 10% increase.
I could easily do this using a case statment using VBA, but im not allowed, any idea of a formulae that would do it?
Our business has a spreadsheet set up for invoicing. A Macro has been created to increase the invoice number, save to the desktop as a PDF with a file name taken from the cells
This is working on my colleagues mac but when we've loaded onto my computer it errors, when I debug I am getting the following error:
Sub Macro3()
'
' Macro3 Macro
'
'
Range("g10").Select
[g10] = [g10] + 1
[Code] .......
Simplified:
I have a this years total in A1, last years total in B1, difference +/- in C1
$1000.00___$800.00___+$200.00___+%
$800.00___$1000.00___<$200.00>___<%>
I am trying to get a % of Increase/Decrease (Between A1 and B1) in D1.
Not as a dollar amount but as a %.
I have tried Percentile and PercentRank and some other stuff. No joy.
I need a script that will look for all the formulas in a sheet and increase them by a digit.
Lets say one that particular formula is =(A1-A2)/A2*100
I need the macro to change this to =(B1-B2)/B2*100
I have already programmed in a Find/Replace command, but realised that this would only work one time only. I need generic code that will bump them up each time rather than having to hard code the Find/Replace command for every single cell in the book.
I am creating a tool that is populating information off of another excel document and presenting the information in a different format then the data originally appears. Basically I am unsure how to create a formula, for example, in cell A1, that as I drag it down (A2, A3, etc) the column letter in the formula advances but the row number remains the same. In another words as the formula moves into cell A2, the "Sheet1!D3" changes to "Sheet1!E3", where as normally it would advance to "Sheet1!D4". I just started back up in excel, im sure this is way easier then I am making it seem but I have been unable to come up with a solution.
View 4 Replies View RelatedA
B
C
D
E
F
[code]....
the example is as per above
formulas for D and E column
criteria :
Column D : pro rate base on when hired
Annual Leave is calculated base on Jan 1 of every year.
* if analyst hired in the middle of the year, their leaves are pro rated base on Jan 1
Example :
Joined : 9/1/2008 : today is : 10/25/2013 :
Currently leave entitlement is : 12 days [Jan 1 to Sept 1] + 2.66 days [Sept 1 to Oct 25] = 14.66 days
Leave until 31st Dec 2013 : 12 days [Jan 1 to Sept 1] + 5.96 days [ Sept 1 to Dec 31] = 17.96 days
I have to reference to another sheet a fixed increase of moving 6 rows across. What would be the formula for it?
For example.
First formula would be =Sheet1!A1
What would be the formula for the subsequent cells. (eg. =Sheet1!A1+6) obviously doesn't work.
I would like to create a financial modeling spreadsheet. Basically my problem is this; I want to have a month by month row for 5 years. For the value of each one I would like it to increase by 950 per month automatically.
View 4 Replies View RelatedI've built a spreadsheet that accurately displays my company's price list. However, from time to time, there are increases and/decreases, by percentages. I would like to know how I can build a formula that would allow me to quickly update the pricesheets by the appropriate percentage, without having to manually do so, one cell at a time.
View 2 Replies View RelatedI have a goal set for the year. With conditional formatting, each month will be set to either red or yellow based on where it stands in relation to the goal. I would also like to show an increase or decrease in productivity for each month. I tried to use conditional formatting with the formula:
=IF(C2=D2, "", IF(C2<D2,"↗","↘")).
The formula works on its own without the conditional formatting so I am not sure what I am doing wrong. I've attached a sample with all the conditional formatting and formulas in place.
I am trying to find the frequency of lottery numbers that occur within 10-day periods (see row 7). Instead of having to manually write each formula for each column, is there a way I can automate it, so that each column will "advance" 10 days?
Excel 2010
A
B
C
D
E
F
G
H
I
J
K
1
ct
0
1
2
3
4
5
6
7
8
9
[Code] .........
Array FormulasCell
Formula
B8:B17
{=FREQUENCY(B3:HNR3,ball)}
Entered with Ctrl+Shift+Enter. If entered correctly, Excel will surround with curly braces {}.
Note: Do not try and enter the {} manually yourself
Worksheet Defined NamesName
Refers To
'am (2)'!ball
='am (2)'!$A$8:$A$17
