Getting Number Of Rows To Move To Gradually Increase With Offset Function
Jun 17, 2014
I need an OFFSET function to start off by moving down 1 row from the starting point and then on the next run through the loop, to move down 2 rows, then 3 rows, etc.
Code:
Workbooks(Thisname).Worksheets("Run Set Up").Range("Duration").Offset(1, 0).Value = Workbooks(Filename2).Worksheets("Front Page").Range("T20").Value
This is what I'm working with. At the moment, I have the value for the number of rows to move set to 1 because I can't figure out how I'd accomplsih what I need.
View 1 Replies
ADVERTISEMENT
Nov 4, 2006
I have sheet1 with four columns. Team, Issue, Discussion and Recommendation. Discussion and Recommendation headings were placed in column B along with the data in the file I was sent. I need to get it back into table format to eventually load into Access. What I'm trying to do is to loop reading down column B. When I find the word “Discussion” (exact format) I need to drop down one row below the word, cut whatever is in the row, move one column to the right, Column C, and two rows up and paste. For example, cell B3 has “Discussion”. I need to drop to B4, cut whatever is in the cell and move to C2 and paste. I also need the same to happen for Recommendation. Find the word, drop down one row, cut whatever is in the cell, move two columns to the right and up four rows. I would like to delete the rows I moved data from, but will do that by hand if it’s too hard to do in a macro.
An example of my data:
TeamText
Design4. Reuse existing code to extent possible.
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignEstablish a baseline and work to the plan.
Design5. Delete old code
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignNo recommendation
Design6. Plan to work without full details.
DesignDiscussion
DesignIncremental design
DesignRecommendation
DesignWork on smaller details first
Sub Discussion()..................
View 3 Replies
View Related
Aug 6, 2009
I need to be able to select a certain number (from, say, 1-20) from a drop down menu, which will decide a number of rows (filled with data) on the next sheet. As I prefer not to give anyone the sheet I'm actually working on I made a quick look-a-like which might explain this better.
A and B are different scenarios, with different values in the fake drop-down menu I made. Just to pass on the understanding of what I want the values to do. If putting a drop-down menu there is troublesome, then I can live without them. But entering a certain value in the field and getting that number of rows for a certain product is what I need. I tried searching for a function/macro to use for this, but I dont know what exactly to look for. Name, etc
View 4 Replies
View Related
Nov 2, 2006
I have a test due in the morning, and I really need this question answered ASAP, if anyone could. I need to create an IF formula for this situation: the standard Mhz is 500. Give 55.00 for that standard. But for every increase of of Mhz, give 25.00 per 100 increase.
View 2 Replies
View Related
May 27, 2013
i'm running out an option, i must use offset or index function but there are problem found: 1.Offset function cannot use a dynamic height or number of columns and the result are #NAME?, here is the code
VB:
Private Sub CommandButton1_Click()Dim k As Variant
Dim b As Variant
Range(Me.RefEdit1).Name = "item"
[Code]......
View 3 Replies
View Related
May 31, 2014
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
View 3 Replies
View Related
Jan 11, 2013
Is it possible to use offset formula to move to the next row data? I am trying to achieve all H&S data will be captured in sheet 2. I know there is an easy way to do that by filtering it. But I am trying to automate the summary template in sheet by putting a formula from the data in sheet 1 below.
Code
Customer Unit Price
Err
0
[Code].....
View 1 Replies
View Related
Apr 13, 2007
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies
View Related
Mar 24, 2013
I have written this macro which I run about 1000 times in a loop. It runs solver and copies the results to a row in my spreadsheet so i end up with a sheet of solver results.
The problem is that every time it runs it eats up memory and slows down. I timed it and the first 100 runs take about 2 minutes and the last 100 takes about 15 minutes, the ram use increases by about 4gb in that time too.
As this is the first VBA code I have written and I have been learning as I go along, I assume its something I have done wrong in the code.
Sub run()
'
' run Macro
' run solver
[Code].....
View 2 Replies
View Related
Aug 22, 2013
I have a workbook I update from numerous sources every day. A few months ago I noticed some of my formatting started to disappear - a couple of borders were missing. a day or two later a couple of cells which had color were no longer colored. number formatting reverted to general so my percentages just showed up as decimals and my dollar values no longer had a $ or commas. Eventually - over the course of several weeks - all formatting in the document was completely gone. A couple of times throughout this process I tried replacing all the formatting, but as soon as I'd save the file, close it and open it back up whatever formatting related changes I had made would again disappear.
Eventually I went back a couple months and pulled an old file which still had its formatting and updated that instead. This worked fine... for about 2 months. three days ago I started noticing the same issues - a few borders disappeared in the file. two days ago a few more borders were gone and a couple of cells lost their color. yesterday and today it has gradually gotten worse again.
View 4 Replies
View Related
Feb 18, 2007
formula to put in microsoft excel 2003 to increase a number by 10%, so for example, 20 by 10%.
View 10 Replies
View Related
Nov 18, 2008
what i need is a macro to run when I print a form. I am making a job card with a unique number on it ie: 100. when I print the form, I then need the 100 to change to 101 and so on. I cant work this one out.
EDIT - Ive attached my work in progress. It is for a computer repair shop. I have a few macros in there as I need to email a copy of the workbook too.
when you open the workbook, you will see the job number in red. I just need a macro tht will increase that number +1 every time it runs. I also need the email macro to rename the workbook to the customer name input in cell B4 - but I think im best to post this request in a new thread?
View 3 Replies
View Related
Sep 28, 2013
I have data to find standard deviation from a1:a5
So use a formulae to do the same.
I want to increase range automatically when i put a number in a6 and so on.
View 1 Replies
View Related
Dec 7, 2007
in cell A1 I have a ref no. eg aa/01/bb
in cell A2 I have a ref no. eg aa/02/bb
only the middle number increases in the reference each time eg: /01/
is there a formula that can achieve this or am i doomed to manual input, I have made a few attempts but cannot work it out.
View 9 Replies
View Related
Jun 23, 2014
As you can see in the attached excel doc, I have calculated a column for "Number of Claims Per week" and also "Dollar amount Per claim". This was done using VLOOKUP and distributions. That is not the issue.
The issue I am having is creating the "TOTAL" for the week. So for example, if week one generates 4 claims, I need to be able to add up claim amount #1-#4.
It seems as though this would be a basic function, but I can seem to find a way to add up a certain number of cells, based on a variable generated from a random number.
If you take a look a my excel sheet, I am trying to solve for the "Claim Total" column on the far right. This column should be the sum of (Number of claims * The individual amount per claim). Note that if there is 4 claims in that week, I would have to add up claim 1-4 to get that weeks total.
Question2.xlsx‎
View 9 Replies
View Related
Jun 12, 2013
writing a formula for the situation below,
In column "A1" i have the formula =C8. I now need to copy this formula across to column "B1" to get =C9 and also copy it across to column "C1" to read =C10.
So the row number should be increasing by 1 and the column remanin constant.
View 3 Replies
View Related
Mar 15, 2005
I created an receipt template in excel. How can I have it increase the receipt invoice number by 1 every time I open this template? For example the first receipt is 100, I want the second receipt to be 101, and so on.
View 4 Replies
View Related
Jul 31, 2006
How can i format my excel spreadsheet cell so that a number
10,000,000
displays as
10
View 4 Replies
View Related
Dec 6, 2006
I am trying to write a program that needs to select a different cell everytime it is ran. For example, this month when it runs I need it to select cell BL137. Next time it is ran it will need to select cell BL138. Month after BL139. The cell it selects will always be in the same column (column BL) and the cell number always increases by the same amount (1).
View 6 Replies
View Related
Jun 9, 2014
I have set the check boxes for each line. I would like to have the today date to appear after clicking the check box on the next right cell. Do I have to use IF for this one?
ALSO I want the number to count up after click the check box. For example:
Name:
Bob (assigned)- 5
(completed)- 4
Every number of completed line increases every time each box is clicked. How can I do that?
View 2 Replies
View Related
Apr 28, 2012
I have a macro that increase a cell number and one that decreases a cell number, heres my code:
Code:
Sub Macro1()
Dim t
t = Split(Worksheets("Sheet1").Range("d5").Text, "/")
t(0) = Format(t(0) + 1, "0")
Worksheets("Sheet1").Range("d5") = Join(t, "/")
[Code] .......
So they do exactly what i want them to do but i want to put a limitation on them, so say the number in the cell is 0 then i dont want it to be able to subtract from it anymore, and say the number is 20 i dont want it to be able to add any more, i tried to put if statments into the code but no luck.
View 3 Replies
View Related
Dec 28, 2006
I have many data in a worksheet named "Table" with "Item" in column A and "Reference" in column B. For each change of item, I need to assign a reference number with a prefix. Below is a sample of the data.
Column A Column B
Item Reference
Orange R9
Orange R9
Orange R9
Apple R10
Apple R10
Apple R10
Mango R11
Mango R11
The starting reference number is not fixed. It could start from 8 or 10.
Thought it would be possible to automate this process using vba.
View 7 Replies
View Related
Aug 12, 2008
I have multiple worksheets (too many, actually!) and each worksheet is a record. I need to enter a Record Number into B5 of each sheet. The Record Number doesn't start at 1. I'd like to enter a number into the first sheet and the rest of the sheets to increase by 1. However, I only need to do this to some sheets.
View 9 Replies
View Related
Oct 26, 2008
I am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
View 8 Replies
View Related
Dec 22, 2012
Can you increase the number of fields shown in the list so that you don't have to scroll through the entire list?
View 2 Replies
View Related
Apr 21, 2009
Is there any keyboard shortcut to increase or decrease the number of decimals shown directly (I mean without having to use ctrl + 1... etc )
View 7 Replies
View Related
Jun 20, 2014
I am trying to create a spreadsheet that will automatically increase the work order number by 1. The cell will always be in the same place. The idea is that when the file is opened it populates the number. After being closed and reopened the number will be 1 higher than the previous.
The page will reused by various people to create and print work requests for my mechanics, I want it to assign the W/O automatically.
View 11 Replies
View Related
Jun 22, 2007
I have done a search and I think this is possible but just can't convert any of the examples to work for me.
This is the calcuilation I would normally enter -
=VLOOKUP(A80,'[CF227.xls]Sheet1'!$A$9:$J$9,10,FALSE)
However I don't want the cell 10 rows across when a match is found I want the figure 10 rows across and then 2 rows down from that point. i.e. if the match is in row A9 I want to return the figure in J11.
View 4 Replies
View Related
May 15, 2014
Our business has a spreadsheet set up for invoicing. A Macro has been created to increase the invoice number, save to the desktop as a PDF with a file name taken from the cells
This is working on my colleagues mac but when we've loaded onto my computer it errors, when I debug I am getting the following error:
Sub Macro3()
'
' Macro3 Macro
'
'
Range("g10").Select
[g10] = [g10] + 1
[Code] .......
View 2 Replies
View Related
Dec 1, 2009
In row E10:Z10 I have a series of values and in row E6:Z10 I have dates associated with each of the values in row 10.
I would like to create a formula to look in E10:Z10 for the maximum value and then return the date associated with that value. For example, if the maximum value is in P10, I would like the formula to return the date in P6.
I have tried without success to use the OFFSET function as follows:
=OFFSET(MAX(E10:Z10),-4,0)
View 3 Replies
View Related
