I have an xls-workbook that is saved in OpenOffice. It has simple formulas that shows correctly in Excel. Excel doesn't solve them before "re-accepting" (like going to formula bar and pressing enter). No editing of formula is needed at all (unless you count "enabling edit-mode" and accepting the empty edit as editing).
View 2 RepliesIs there a formula that will return the number of "weekdays" there are in any given month if I provide the month and year?
Is there a formula that will return the total number of days in February if I provide a year?
I have a button on a userform that will generate certain text in a combo box. The combobox then goes to a worksheet. If I select a second button, I want the first information on the worksheet to clear and accept the new information from the next button.
NOTE: I have it as a combobox so I can either select it from the combobox or click the button. When I select the information from the combobox, it does clear out everything automatically.
Here is my code:
Private Sub CommandButton2_Click()
Worksheets("score").Range("B6").ClearContents
ComboBox1.Text = ComboBox1.Text + "PASS"
Worksheets("score").Range("b6") = Me.ComboBox1.Value
TextBox2.SetFocus
End Sub
What I think I am doing is clearing the cell, entering my text then going to the next text box, but when I click the second button (same code, text is "FAIL"), I then get "PASSFAIL" in cell B6.
I want it to clear out the previous entry and only use the new one, but it keeps all that I click even though I said to clear the contents.
I have the following used formula to count how many occurances there are of a particular piece of text in a column:
=SUM(IF(range="text",1,0))
e.g. {=SUM(IF(K6:K16="H",1,0))}
I have repeated this formula for an adjacent column
e.g. {=SUM(IF(L6:L16="M",1,0))}
I need to find a way of counting number of occurances in these two columns (K and L) when text "H" and "M" are present in the same row.
To further complicate matters (well for me anyway) the text "H" and "M" care chosen from a list of options in the K and L columns.
What i ultimatly want to do is create a matrix to compare how many times all possble occurances of the various options listed in both columns are present in the same row in the spreadsheet.
PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca
Tab1
PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca
Tab 2
I have the column E in excel labeled 'Notes' in tab 1 adding at the bottom of the column using(=COUNTA(E2:E29), so if the cell is empty it doesnt add it up in the totals. In tab two i have that same column linked via formula. In tab 2 its counting the empty cells because even though they appear blank they have a formulas in them how do i get it to not count those cells. here is the formula im using in column E tab 2.
=IF('tab1'!E2="","",'tab2'!E2)
The Code will not add the found values into the userform textboxe's.
View 14 Replies View RelatedLeith Ross kindly helped me with the below macro but for some odd reason, Excel simply does'nt like it and gives me the error message: "Compile Error: Object Required".
The code below is part of a bigger macro.
I have a spreadsheet that has values in the end column that read Addition, Deletion or No Change. I am trying to get the row cells in Column A to shade red, green or yellow depending on the value of the cells in Column I. I have tried the folllowing:
="IF(I4=No Change)"
I chose the fill to be green for this but when I click OK nothing happens but I do not get any error messages.
I've created a worksheet that uses multiple print macros with defined margins. This works fine with the Epson printers I have, but a user has an HP Officejet Pro K550.
This printer has an option named "Minimize Margins". If this option is checked then you adjust the margins the way you want.
For some reason when this particular workbook is opened you have to manually go and check this option so that the margins can be manipulated. this is a problem b/c my macro prints several reports so it's impossible to set this option.
I then opened a different workbook and it accepted the default setting (option checked). For some reason the workbook I created doesn't.
This code is not accepting the values which is starting from strings like this
for example
bearing 15/16 IN LG, 1-1/16 IN OD, 11/32 IN THK,21/128 IN ID
19/128 IN LG, 2-3/64 IN OD, 1/2 IN THK, 5/64 IN ID
steel 15/16 IN LG, 1-1/16 IN OD, 11/32 IN THK,21/128 IN ID
19/128 IN LG, 2-3/64 IN OD, 1/2 IN THK, 5/64 IN ID
spares 15/16 IN LG, 1-1/16 IN OD, 11/32 IN THK,21/128 IN ID
[Code] .....
I use a scanner that initiates a f2 command and trips my macro. I would like to use multiple scanners using a 8 port hub but I am having trouble with a scanner starting my macro and another scanner dumping data into my macro before the first one is finished. This is dropping scanned data into my macros. Is there a way to prevent the scan from accepting data until the macro has completed its cycle.
View 2 Replies View RelatedI cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
I've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.
View 9 Replies View RelatedI'm trying to automate creating certain keyword combinations I need, based off of the values I input into reference cells in columns A - E; the goal is to compile a list of keywords which I will then use to track my rankings in search engines.
I'm looking to only output 500 keywords, so some of the cells in columns A, B, C & E will not contain data (column D will always have a primary Geo-target listed). This results in some of the concatenate formulas I've created outputting partial data (i.e. if there is no data in cell A10, and cell D2 contains the word "Knoxville", then cell I10 will output the data, "Knoxville "). How can I setup conditioning formatting or a formula so that these auto-generated cells appear blank if one of the reference cells has no data within it?The reason why I need the above to work is because I want to setup a formula that automatically counts the # of keyword combinations created by the data entered into any of the reference cells. With the partial combinations being listed, it skews my data. Which leads me to my next question: what is the best formula for counting the # of cells containing a full keyword combination from any of the cells listed in columns G - O (minus the data in the header cells; i.e. G1, H1, etc...)?Lastly, is there a formula I could use that would then aggregate all of the full keyword combinations within the "Complete Keyword List" column (column P)?
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies View RelatedI have a macro running this code to strip out unwanted formulas and formatting.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2
'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If
Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
I was given this spreadsheet to count attendance by entering the entry date and exit day, however it's counting the first day and the last. I'm needing it to only count the first day and not the exit day.Book2.xls
View 1 Replies View RelatedIs it possible to hide formulas from the formula bar while still having the formulas active?
View 8 Replies View RelatedI have a spreadhseet with various functions on it and what I am trying to do is this.
Cell E4 returns a >35 or <35 true or false value
Cell G4 is either blank or has "Yes" text type into it.
What I am trying to do is get cell F4 to return certain arguments.
E4 = >35 and G4 is blank I want it to state "Email Hiring Manager"
E4 = ,35 and G4 is blank I want it to state "Wait"
I have a basic IF formula that returns this
=IF(E4>35,"Email Hiring Manager","Wait")
Then if cell G4 is populated with a Yes the formula needs to overwirte the origonal if with the return arguments of
=IF(G4="Yes","Email Agency","Email Hiring Manager")
If yes then what would be Email Hiring Manager (yes will only be input if E4 is greater than 35) will be overwritten with "Email Agency"
Can this be done with two If formulas or does there need to be 3 or more to count if other IF formulas are actually returning a value?
If you have a cell with the value ="2*c2+3" NB: (Notice the ""), then to make excel convert the formula in another cell to =2*c2+3 (notice the removal of ""), so that it can calculate the value of the cell instead of showing a textstring?
I have formulas in a column and they are working unless I edit them to include another function, more cells, whatever, then they display as formulas instead of the result. I've gone to Tools --> Options --> View and the Formulas box is not checked. As well automatic calculation is on not manual.
View 4 Replies View RelatedI am looking for a formula that will count days in increments of 1 through 40. I need it to look like this: DAY 1 of 40
Whereas only the "1" counts up to 40 every 24 hours. And maybe a button to reset the counter back to "1" ...
want to count up from a certain number but rather to a certain number.
Basically I am making a spreadsheet of products which already have product ID's, however there are 1000's of these. So I am doing them by manuafactuer, so some sheets do indeed start from 1, but pretty much every other sheet starts from a number like 1300, or even 2563.
how I would go about making excel automatically fill in the ID field?
So it would show like;
1300
1301
1302
etc etc
i use a excel sheet to count the points gaint in an competition with model sail boats ...
View 13 Replies View RelatedI have a spreadsheet with 3 sheets, the first sheet is to be an overview of the entire workbook used to keep track of training,
The last sheet (Called Raw_Data) contains various coloumns, the two I am interested in is the training course and the name, as someone completes a course I record what the course was, who did it and date/time of start/finish,
What I would like to do it to count on the front sheet how many times someone has completed a course
Operational Overview
Joe Blogs
Work Pratices
Joe Blogs
Incident Handling Processes
Joe Blogs
Training
Paul Smith
Incident Handling Processes
Joe Blogs
From the above table Job blogs should flag in a cell for Incident Handling Processes twice, Is this something that can be done via a formula as I am trying to avoid VBA.
So I have an annoying dataset to work with. The first column contains ID#, string, string, string, ID#, string, string, string, string, ID#, string, and so on. It is basically a list of patient numbers with a list of their appointments listed underneath them. I need to find a way to count up the number of strings for each patient, like shown below:
Patient#
Count
101
2
Had an appointment
Had an appointment
Deleted-Had an appointment
The format isn't too important. The data I have is basically column A, and I want to create column B.
Is there a function in Excel that will count cells that are different from one another? I.e. it would not count the same value twice. For example, in column A:
a
a
b
a
b
b
c
a
c
The result would be 3. However, if I replaced the first "a" with a "d" I would get 4 as a result. Basically I want to know how many different arguments there are in a list. I could not find a function that does this in the Excel list of functions.
In my rows, I have 0, -1 and 1 and wanted to know how many 1s, 0s and -1s I have. So in the example below, there are 4 -1s, 4 0s and 3 1s.
-1
1
0
-1
1
0
-1
1
0
-1
0
How do I get cell C4 to give me a total of the times a score in column C is > than opposing score next to it in coumn D? Also, a total in cell D4 to show the number of times this team's score was less than the opposing score in column C. This would be for a running Win/Loss record.
View 3 Replies View Related