Formulas Will Not Update / Recalculate

Jun 14, 2006

When I have a column of data, say reference A1 to A9 with a formula beneath it in A10 being that the formula is = SUM(A1:A9) when I update any of the data in A1 to A9 the figure in A10 does not update. The only way to get it to update is to click in A10 where the formula is and then click in the formula bar and press enter; the formula seems to recalculate after this and it works or you need to save it and it works. It should work right after any change in the data being added.

View 3 Replies


ADVERTISEMENT

Recalculate Using Two Different Formulas In Same Cell?

Jan 25, 2014

I need to create a drop down menu or something of that sort, that allows the user to select what units he wants his results to be in.

When a particular units system is selected, the results must be recalculated and displayed in their respective cells.

No matter which units are selected, the units must always be displayed in the same set of cells, that means the formula or reference in the set of those output cells must change automatically, based on the units selection.

View 8 Replies View Related

Add Update To All Formulas In Selection

Nov 2, 2012

I have quite a few formulas on my sheet that I need to add a function.

Basically I have =SUMIF($I$2:$I$30,I1,$J$2:$J$30) and it needs to be update too

and I need =IF(Master!G5="","",SUMIF($I$2:$I$30,I1,$J$2:$J$30))

Is there a VBA routine that can do this?

View 6 Replies View Related

Refresh / Update Formulas

Feb 27, 2008

I have created a macro to insert a template worksheet (qm.xlt) into a workbook (wb.xls).

Sub Test_InsertXlt()
Sheets.Add Type:="qm.xlt", After:= ActiveWorkbook.Sheets(ActiveWorkbook.Sheets.count)
End Sub

The template has cells which contain formulas which lookup values in another sheet in the workbook (configData).

For example: template cell F20 has the formula

=VLOOKUP($C20,ConfigData,8,0)

Once the template worksheet is inserted into the workbook, its cell values remain "#Name", which corresponds to a "Error 2029" in the code.

If I manually edit the cell (F2) and then hit 'Enter', the cell value is updated correctly. My question is :how can I do this via code/macro?

View 4 Replies View Related

Link Formulas Don't Update Automatically

Sep 10, 2006

I have 2 WorkBook, Division.xls and Department.xls. The Sheet1 in the Department is linked & getting the values from Sheet1 in the Division & works fine. But if there is a change in Division workbook, its not affecting here immediately. When i close the Department.xls and open again, i can find the latest values. I thought the links to the other sheets or workbooks will be updated when i press the save button. So I used the SendKeys "^S" in the VBA. But it fails. Is there any way to mention through VBA code to update the recent values to the Department workbook from Division.

View 7 Replies View Related

Automatically Update Formulas For Adjacent Cells?

Jun 6, 2014

I am copy/pasting a new column of data (F). I have three formulas MIN,AVE,MAX watching each row in the columns "=MIN(B2:E2)" or example. When I insert the new column F, the formulas give me the "Formula Omits Adjacent Cell" warning. I don't want to turn off the warning; I want to know if there is a way for the formulas to automatically include the new data? Do I need a Worksheet Event for this?

View 3 Replies View Related

Manually Update Cells With Formulas And Macros

Sep 2, 2008

why I must update all cells, with formulas, manually after I do something with the workbook. I'll try to make an example.

If I make a macro that enters =sum("F1:F10") it says #NAME? when its done, but if I dubbleclick it and press enter it calculates the cell like its supposed to. I've tried to press alt + ctrl + F9, but that doesnt work.

Is there a command to dubbelclick the entire workbook and then press enter if you know what I mean?

View 9 Replies View Related

Formulas Added From Macro Code Don't Update

Mar 12, 2008

I used VBA to write a number of formulas into various cells in a workbook. After the VBA is done running, I change the values in the cells that are referenced by the cells I wrote formulas in. The formulas do not update after I enter this new information. My calculation is set to automatic, and F9 doesn't help.

View 3 Replies View Related

Making Formulas That Automatically Update When Adding Cells

Jun 9, 2014

I want to make an excel workbook for a client. What I want to do with it is make a set of instructions telling them to add or insert as many rows in specific categories I have made for them. These options differ depending on the different duties performed. There will be an associated number (value for that duty, ex. duty might be Janitor and the number would be like 5 dollars per hour, so on and so forth), I want to make it to where there is a code that notices more rows and adds more IF statements or whatever statements are needed to keep adding those extra options. These values are connected to a data validation list that drives the if statement.

View 4 Replies View Related

Auotmatic Recalculate

Sep 30, 2009

I have a countdown formula in a cell and I would like to set up code to recalculate the countdown timer.

View 14 Replies View Related

Trick UDF To Recalculate Without Using F9?

Nov 14, 2013

I built the below udf to run a calculation on a range based off of dates. But it won't recalculate when the cell with a date changes.

I had to do the "application.volatile" at the top and press F9 for it to work.

Is there a way to recalculate without this or trick excel to do so?

Function TestRange(r As Range, q As Range, rcol As Range)

'Selects range based off two specified date ranges
'formula must reside in the same column as the data column (at the top)

Dim rlast As Range
Dim firstvalcell As Range
Dim Lastvalcell As Range

[Code] ......

View 5 Replies View Related

EnableCalculation Would Not Recalculate At All

May 6, 2008

I have a macro that can individually turn on or off the EnableCalculation property of each worksheet in a workbook (that is, set the property to True or False). It worked very nicely for a while, and made some of my more formula-laden workbooks much more tractable. But after a while, when I would turn the EnableCalculation back to True for any worksheet, the formulas on that sheet were still frozen (would not recalculate at all), and could only be unfrozen by going to each cell and doing [F2] [Enter]. Just to rule out the obvious, Automatic calculation is turned on, and I have made sure that the macro is successfully returning the EnableCalculation property back to True.

It seems that if I physically go into the VB Editor and manually (through the GUI, as opposed to programmatically) switch the EnableCalculation property back to False, then back to True again, then it will revive the formulas. But this is silly, and I was hoping there was a better solution... maybe someone has encountered this before? If it's just another Microsoft bug, I don't know what's the trigger is, but I imagine it's when you save/close the workbook with some of the sheets' EnableCalculation properties still set to False. I know the property is not stored/saved with the workbook, i.e. all sheets will reset EnableCalculation to True when the workbook is re-opened, but maybe it's still causing a glitch.

View 9 Replies View Related

Time To Recalculate

Feb 12, 2010

My excel file consists of 15 sheets, thereof 4 that are purely graphs, the others have tables with formulas. When opening the file or changing values, the entire sheet is being recalculated every time which takes a few seconds. Is this normal or can one tell to recalculate at another stage?

The activities sheet has a date macro (double click in date cell).
The workbook has a macro for the footer information.

View 9 Replies View Related

Sheet Won't Recalculate

Nov 26, 2003

My sheet has a very simple formula in a lot of the cells that simply say this cell in sheet A should equal a cell on sheet B in the same workbook.

I deleted the contents of the cells in sheet B, however the cells in sheet A did not update. It still shows the contents of sheet B that were there before I deleted them. The sheet is set to calculate automatically and I even commanded it to force calculation.

Any clues as to why my sheet will not update?

If I cut a formula from a cell in Sheet A and paste right back, it updates correctly to reflect the cell that was deleted in Sheet B.

View 9 Replies View Related

Recalculate List Per Keystroke?

Jan 2, 2013

I have a list of asset numbers that I am displaying to a user. I have a cell where the user is to type in the asset number. What I would like is to be able to display a list of matches in another group of cells.

I.e. - if the cell is populated with "D49", the list on the right will contain all asset numbers starting with "D49"...

I can do this easily enough if I wait for the "Change" event on the worksheet - but this necessitates the user typing some in, hitting enter, etcetera.

Is there any way to trigger an event per keystroke instead of on worksheet.change?

View 4 Replies View Related

Recalculate And Print To Cell

Dec 16, 2013

I have a cell which sums up a lot of random number generators (after going through several other functions) and therefore every time the worksheet recalculates the value of this cell changes.

Is there any way I can get this cell to print it's value say, 1000 times, each print one cell below the previous, with a recalculate in-between each print? I'm guessing this needs scripts? Or is there a way of just directly inputting this into 1000 cells and letting it fly?

Cell formula: =(COUNTIF(BB:BB,"yes"))/COUNTIF(BB:BB,"no")

View 2 Replies View Related

Allow A Locked Formula To Recalculate?

Apr 30, 2009

how to lock a formula in a cell, protect the sheet but still allow it to recalculate when new data is entered in a unlocked cell that feeds the formula? I am using Excel 2003.

View 5 Replies View Related

How To Recalculate With Drop Down Menu

Jul 30, 2009

I want to make a drop down menu whereby each choice in the drop down would re-calculate my workbook.

Let me explain:-

I want to make a drop down menu in sheet 1 with 3 choices.
The 3 choices come from sheet 2 (row 1, column A, B, C).
I have data in sheet 2 in rows 2 through to 6 in columns A, B, C.
I have sheet 3 that currently uses the data from sheet 2 row 2 through to 6 for column A.

I want to be able to use the drop down menu in sheet 1 to choose either column A, B, or C in sheet 2 and then re-calculate the data in sheet 3 accordling.

I have the drop down menu made now.... but how can i re-calculate the values in sheet 3 after choosing a choice in the drop down?

View 9 Replies View Related

Recalculate Worksheet When Cell Changes!

Nov 11, 2008

My workbook in Excel 2003 is set to manual re-calculation to save constant updating of all the worksheets.

However, I have 2-3 worksheets where I have a drop list box containing dates and I would like all of the information in that particular worksheet to update itself when the date changes.

e.g. If dropdown list box in B2, when changed from 4/10/08 to 11/10/08 all formulas etc are updated.

Have done a search but the only examples I can find are ones where the worksheet updates itself whenever any cell is changed.

View 8 Replies View Related

Recalculate Only Selected Cells?

Jan 11, 2012

I have a worksheet which will take a long time to recalculate. So, I want to recalculate only on selected range.

View 2 Replies View Related

Macro To Recalculate Worksheet

Apr 20, 2009

I have sheets 3, 4, 5 which I would like to only _manually_ recalculate (with a macro -- the sheets are locked at other times), and say sheets 1, 2, 6 which I would like to automatically calculate.

Is there a way to do this in excel? I can only see a way to manually/automatically calculate the entire Excel application, which is really not ideal.

View 9 Replies View Related

Dont Recalculate Links

Dec 29, 2009

I am using Excel 2007. I have read that if you open an excel 2003 document, that has external links, the links will be recacluated automatically. How do I change the settings in '07 so that the links are not recalculated when I open a 2003 excel file?

View 9 Replies View Related

VBA Code To Recalculate All Formula

Jun 17, 2006

I have made some UDFs (custom functions) using VBA, when the problem is that they don't update automatically like standard functions. I have numerous tickboxes which cause text to become bolded, and then my function counts the total, only including bolded text:

Function CountGamerScore() As Long
Dim i As Integer
Dim strScore As String
Dim intDigit As Integer
i = 6
For i = 6 To 52
strScore = "L" & i
If Range(strScore).Font.Bold = True Then
intDigit = Left(Range(strScore).Value, Len(Range(strScore).Value) - 1)
CountGamerScore = CountGamerScore + intDigit
End If
Next i
End Function

However, if I untick or tick a checkbox, the bold and unbold works fine (done in another sub, but the function does not update the value in the cell for total.

Therefore, is there any VBA code that will tell Excel to recalculate formulae??

View 9 Replies View Related

Recalculate Cell Only If Condition Is Met

Mar 31, 2007

to write a VBA code that will have a cell RE-calcuate an excel formula ONLY if a date i have in a cell to the left of it is greater than another cell in the worksheet.

These dates will change so i cannot have the value entered into the VBA code, but rather linked to the data i would enter into the said cell.

View 8 Replies View Related

Recalculate Upon Changing Worksheet

Apr 28, 2007

On my workbook I have autocalculation off. I'm trying to think of the best way to trigger a "Calculate" upon changing sheets. So everytime you click on a new sheet, it runs a "Calculate"?

View 2 Replies View Related

Recalculate Cell Everytime It Is Changed

Aug 14, 2008

I have a spreadsheet where sheet("summary").Cells("K4") = sheet("component").Cells("G7").

This is written as a formula, e.g. =SUM('Component'!G7).

I am trying to achieve the same through VBA. I can get the summary cell to copy the others. but it just copies it the once when it is created. How can I make this re-calculate everytime it is changed?

View 6 Replies View Related

Recalculate 'COUNTIF' Fields Each Month

Mar 6, 2008

I need a macro to automatically update 50 cells (currently done manually) with the calculation below. The calculation is different in each cell ie a different range is specified but the concept is the same.

COUNTIF(‘SHEET 1’!$A$1:$?$99,”X”)

SHEET 1 remains static
$A$1 remains static for the particular cell - each cell has a different value

$?$ ? moves to next column number each time the macro is run
$?$99 99 remains static - each cell has a different value

“X” remains static - differs from cell to cell

View 13 Replies View Related

Recalculate Cells In Specific Range

Feb 13, 2008

I have found the following piece of code which does almost what I want it to:

sub my_calc
range("A1:A25").calculate
end sub
However, the Range I want Excel to recalculate is, from the Active Cell, 20 Rows down and 81 Colums across.

How would this Range be defined in VBA, please?

View 9 Replies View Related

Wont Recalculate With Automatic Calculation

Oct 6, 2006

I am working in a fairly large worksheet, and I realized that when I make changes to it, sometimes some of the cells do no recalculate. The only way I can get them to recalculate is by clicking into the cell, and then hitting return.

The issue is that I don't know which ones are failing to recalculate unless I click into each individual cell and hit return to see if it changes. This would be logistically impossible given the size of my sheet.

Has this ever happened to anyone else? Does anyone have any suggestions as to how to fix this issue?

View 9 Replies View Related

Excel 2007 :: Macro Won't Recalculate Automatically?

Feb 4, 2014

A certain macro (or is it a VB script?) in an Excel 2007 spreadsheet has to be manually recalculated every time I open the file. The only way I've found to do this is to click in the formula bar and hit Enter, or else click the green check mark to accept the formula. The spreadsheet is set to recalculate automatically, so I do not understand why this is happening.

Another wrinkle is that I can't locate the specification/definition of the macro. I checked the Developer menu on the ribbon and looked in the Visual Basic and Macros lists, but could not see the definition of the macro in question. Another user created the spreadsheet but I am unable to contact him...

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved