Add Update To All Formulas In Selection
Nov 2, 2012
I have quite a few formulas on my sheet that I need to add a function.
Basically I have =SUMIF($I$2:$I$30,I1,$J$2:$J$30) and it needs to be update too
and I need =IF(Master!G5="","",SUMIF($I$2:$I$30,I1,$J$2:$J$30))
Is there a VBA routine that can do this?
View 6 Replies
ADVERTISEMENT
Jun 17, 2008
I am trying to use a row of cells as update cells, where the user inputs an amount into greyed out cells, which in turn updates Sheet1!$I$2:$I$11, from which it will update other worksheets that are currently in progress. but I do not know how to go about it. Is it possible?
For each amount the user enters (for each Code Number) a date will be displayed below the amount.
View 9 Replies
View Related
Jun 14, 2006
When I have a column of data, say reference A1 to A9 with a formula beneath it in A10 being that the formula is = SUM(A1:A9) when I update any of the data in A1 to A9 the figure in A10 does not update. The only way to get it to update is to click in A10 where the formula is and then click in the formula bar and press enter; the formula seems to recalculate after this and it works or you need to save it and it works. It should work right after any change in the data being added.
View 3 Replies
View Related
Feb 27, 2008
I have created a macro to insert a template worksheet (qm.xlt) into a workbook (wb.xls).
Sub Test_InsertXlt()
Sheets.Add Type:="qm.xlt", After:= ActiveWorkbook.Sheets(ActiveWorkbook.Sheets.count)
End Sub
The template has cells which contain formulas which lookup values in another sheet in the workbook (configData).
For example: template cell F20 has the formula
=VLOOKUP($C20,ConfigData,8,0)
Once the template worksheet is inserted into the workbook, its cell values remain "#Name", which corresponds to a "Error 2029" in the code.
If I manually edit the cell (F2) and then hit 'Enter', the cell value is updated correctly. My question is :how can I do this via code/macro?
View 4 Replies
View Related
Sep 10, 2006
I have 2 WorkBook, Division.xls and Department.xls. The Sheet1 in the Department is linked & getting the values from Sheet1 in the Division & works fine. But if there is a change in Division workbook, its not affecting here immediately. When i close the Department.xls and open again, i can find the latest values. I thought the links to the other sheets or workbooks will be updated when i press the save button. So I used the SendKeys "^S" in the VBA. But it fails. Is there any way to mention through VBA code to update the recent values to the Department workbook from Division.
View 7 Replies
View Related
Jul 31, 2008
I have two worksheets...
Sheet 1
A1: description
A2: Target Iteration
A3: Concat A1, A2.
Sheet 2.
A1: Drop down datavalidation list selected from A3, sheet 1.
On sheet 2, a user can select from the list. If a user changes the value in A2, sheet 1, I want the value that is associated and already selected in A1, sheet 2 to automatically update. There is a 1 to many relationship with the concat and the drop down. In that, sheet 2 can have multiple rows with the same value from sheet 1 A3. Is there a way when A3 sheet 1 changes, to search in A:A in sheet two and update the values for those records that match the original value in A3, sheet 1?
View 2 Replies
View Related
Jun 6, 2014
I am copy/pasting a new column of data (F). I have three formulas MIN,AVE,MAX watching each row in the columns "=MIN(B2:E2)" or example. When I insert the new column F, the formulas give me the "Formula Omits Adjacent Cell" warning. I don't want to turn off the warning; I want to know if there is a way for the formulas to automatically include the new data? Do I need a Worksheet Event for this?
View 3 Replies
View Related
Sep 2, 2008
why I must update all cells, with formulas, manually after I do something with the workbook. I'll try to make an example.
If I make a macro that enters =sum("F1:F10") it says #NAME? when its done, but if I dubbleclick it and press enter it calculates the cell like its supposed to. I've tried to press alt + ctrl + F9, but that doesnt work.
Is there a command to dubbelclick the entire workbook and then press enter if you know what I mean?
View 9 Replies
View Related
Mar 12, 2008
I used VBA to write a number of formulas into various cells in a workbook. After the VBA is done running, I change the values in the cells that are referenced by the cells I wrote formulas in. The formulas do not update after I enter this new information. My calculation is set to automatic, and F9 doesn't help.
View 3 Replies
View Related
Dec 6, 2013
Any way to apply a formula to a cell depending on what choice is made from a drop down box in a cell that it refers to.
Hypothetically:
I have a drop down box in A1 with 2 options: Cookie Making Costs - or - Cake Making Costs
In cells A3 through A10, I have cells with the costs for all the ingredients (and B3 through B10 for cake ingredients).
If I select Cookie Making Costs, I would like B1 to apply a formula that sums up all the costs associated with making cookies "=sum(A3:A10)"
If I select Cake Making Costs, I would like B1 to apply the sum of the cake ingredients "=sum(B3:B10)"
View 2 Replies
View Related
Feb 7, 2012
I am trying to display a formatted formula (combination of greek characters, superscripts, subscripts, bold, italics, etc...) based on a selected input. I have a selection cell with a drop down offering the choice of 4 difference scenarios. I want to display the resulting formatted formula depending on which scenario is selected (the formula is difference depending on the selection, as well as perform the calculation.
The calculation works fine, but I cannot figure out how to show the formatted formula. The selection works using IF statements, or VLOOKUP, but does not bring the formatting across. How can I do this?
View 1 Replies
View Related
Jun 9, 2014
I want to make an excel workbook for a client. What I want to do with it is make a set of instructions telling them to add or insert as many rows in specific categories I have made for them. These options differ depending on the different duties performed. There will be an associated number (value for that duty, ex. duty might be Janitor and the number would be like 5 dollars per hour, so on and so forth), I want to make it to where there is a code that notices more rows and adds more IF statements or whatever statements are needed to keep adding those extra options. These values are connected to a data validation list that drives the if statement.
View 4 Replies
View Related
Nov 30, 2009
I searched but didn't find exactly what I needed. I have a workbook with 31 sheets. It is a price guide with each category on a separate worksheet. I figured out how to list the sheets on a separate tab. What my client wants is the ability to:
1. select certain categories for printing, the ToC, Cover and backcover pages have to print in every case
2. the ToC has to change depending on the sheets selected.
I'd rather write some code and give him an an easy command button rather then teaching him how to select non-concurrent sheets and printing only active sheets.
What I'm really stuck on is the updating of the ToC with active sheets only (category and starting page which changes depending on pages selected).
View 13 Replies
View Related
Sep 5, 2008
I have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies
View Related
Oct 18, 2013
Let's say that in column A I have numbers,"Yes" and "No". I want in column B to have only the numbers from column A, in the same order without any empty ranges, and everytime I add in column A a new number, column B to update automatically with that number. Let's have an example:
A B
Yes 12
12 13
No 10
13
No
10
Yes
And if I want to add in column A:
A B
Yes 12
12 13
No 10
13 25
No 15
10
Yes
25
15
So the column be will update automatically. I already tried =IFERROR(INDEX($A$1:$A$10,SMALL(IF(ISNUMBER($A$1:$A$10),ROW($A$1:$A$10)),ROWS(B$1:B1))-ROW($A$1)+1),") but using this many times get's my file very heavy and the excel is working slow.
View 13 Replies
View Related
Jun 3, 2013
If a user selects certain options from a drop down list created by cell verification (from list), is it possible to display an input box and have the resulting input populate on another worksheet in the workbook? I have an attendance template I'm working with and if a user selects OT (Over Time) then a input box is displayed prompting for how many hours. The overtime is then tracked on another worksheet.
View 1 Replies
View Related
Oct 3, 2006
I tried very hard to design a leave roster for user to mark their leave application. The criteria are as follows:
1. 4 applications per date
2. a region of worksheet (i.e. "A2 to H20) will be defined for users to "click" on the cells (within the defined region) to mark their application.
3. once a cell is clicked (i.e. marked), it cannot be altered.
4. each click will automatically increase the total by 1.
I got the following code to deal with the situation but user can still click on any cell outside the region (in fact I fail to define the region).
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim m
ad = Mid(ActiveCell.Address, 2, 1)
m = Range(ad & 24).Value 'here a formula "CountA(A2,A20)" will be place in the cell (24, c).......................
View 2 Replies
View Related
Jan 30, 2007
I have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
View 9 Replies
View Related
Oct 27, 2008
I have some VB code which sequentially opens over 200 workbooks to extract data from each and populate another workbook. These workbooks do have links to other workbooks in them.
For some reason when some of these workbooks are opened I get a requestor window asking whether I want to Update or Don't Update the data. I always want to Update the workbook and believe this can be done in VB by hiding the requestor?
View 7 Replies
View Related
Jun 21, 2007
I have a vlookup to another workbook. It works fine if both workbooks are open. But if both are not open and I open the workbook with the links and click Update, #VALUE! returns. I have attached the two files. I don't think it is my formula, but here it is anyway. =IF( COUNTIF([Tempozgrid.xls]June!$A$52:$A$83,A3),VLOOKUP(A3,[Tempozgrid.xls]June!$A$52:$L$82,12,FALSE),0)
View 2 Replies
View Related
Apr 4, 2013
I am working on a project where user has to select an item from a listbox, however there is a condition that if user select an item, other items of listbox should be disabled so that he/she can not select any other item.
Is there any way to do that as I tried
VB : Listbox.enabled = False
and
VB : Listbox.locket = True
in Listbox - Click/Change but no desirable results got.
View 1 Replies
View Related
Jul 20, 2007
I want to have a drop down list in a cell so that the value in the cell can be only selected from two columns of data. Additionally once the data from the first column has been selected I want to be able to limit the inputs the user can select from in the second column.
e.g. In cell C115 I want to have the value BDS05.
I want to be able to select the value BDS from a drop down list of values and once that value has been selected I want to be able select 05 from a list of values from 01 to 14
If I select BCS as the first value then I want the second set of values to be limited to 01 to 02 etc.
I have read about combo boxes and list boxes and I'm a bit confused about the best way to achieve this (or even if I can).
View 6 Replies
View Related
Dec 3, 2013
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
View 4 Replies
View Related
Dec 15, 2008
I've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.
View 9 Replies
View Related
Dec 11, 2008
I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
View 5 Replies
View Related
Apr 18, 2007
I have been trying to remove or disable the message on update to other worksheet " To update all linked click yes......" I have try the following unsuccessfully
Sub auto_open()
Application.AskToUpdateLinks = False
End Sub
On the menu bar choose Edit ---> Links Can not choose manual, as the option is grey out (disable) I would prefer a vba solution, but I am open to anything to get rid of this message
View 2 Replies
View Related
Dec 11, 2013
I'm trying to automate creating certain keyword combinations I need, based off of the values I input into reference cells in columns A - E; the goal is to compile a list of keywords which I will then use to track my rankings in search engines.
I'm looking to only output 500 keywords, so some of the cells in columns A, B, C & E will not contain data (column D will always have a primary Geo-target listed). This results in some of the concatenate formulas I've created outputting partial data (i.e. if there is no data in cell A10, and cell D2 contains the word "Knoxville", then cell I10 will output the data, "Knoxville "). How can I setup conditioning formatting or a formula so that these auto-generated cells appear blank if one of the reference cells has no data within it?The reason why I need the above to work is because I want to setup a formula that automatically counts the # of keyword combinations created by the data entered into any of the reference cells. With the partial combinations being listed, it skews my data. Which leads me to my next question: what is the best formula for counting the # of cells containing a full keyword combination from any of the cells listed in columns G - O (minus the data in the header cells; i.e. G1, H1, etc...)?Lastly, is there a formula I could use that would then aggregate all of the full keyword combinations within the "Complete Keyword List" column (column P)?
View 11 Replies
View Related
Jan 10, 2013
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies
View Related
May 13, 2008
I have a macro running this code to strip out unwanted formulas and formatting.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2
'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If
Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
View 4 Replies
View Related
Mar 26, 2007
I'm using the following code in a worksheet:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
col = ActiveCell.Column
Range("output") = ActiveCell.Offset(0, -(col - 4)).Value
End Sub
In case it's not obvious, the macro places the value in the active row and 4th column of the worksheet into the range "output".
The problem is, the worksheet is large and somewhat slow to recalculate. This macro forces a recalc on any selection change, but i only need it to run when the row selection changes, not the column.
I'm sure there's a straightforward way to reprogram this.
View 7 Replies
View Related