I know I can freeze panes eithe across a column or row but is it possibleto do both at the same time so that I can have a header row and a few columns on the left of the screen frozen?
View 2 RepliesI'm trying to lock the cells of my work book both vertically and horizonatlly. There are "header criteria" on both colums and rows that I want to lock so when you scroll down or over the title bars stay. When I've done it in the past it won't let me lock both correctly.
View 7 Replies View RelatedBasically I want to see more dates, as you can see I've dropped down Cell B1 (31-Mar) to the B28 (27-Apr) Obviously if I wanted to see past 27-Apr I would just continue the drop down but I want to keep it within 28 rows and carry the dates onto cell C1-C28, D1-D28 etc, is there any way to do this using the drop down function or will I have to drop down each column individually then look date in the last row of that column and type the next date myself on the next column and drop it down?
View 1 Replies View RelatedI have a situation which I hope is fixable. I have frozen panes above and to the left of cell F5, therefore all columns to the right of column E scroll left and right and all rows below row 4 scroll up and down as required. My problem is that I also need the whole top row to remain static all the time.
View 3 Replies View RelatedI have a spreadsheet with a summary tab and 30 data tabs. The data tabs are named page-1 to page-30. In the summary page I have the following formula in cell C39: 'page-1'!C20
I want to be able to drag horizontally across 30 cells and have it increment to 'page-2'!C20, 'page-3'!C20 etc.,
and also drag it vertically and have it increment to 'page-1'!C21, 'page-2'!C22 etc.
I have a list of numbers I want to display horizontally instead of vertically. Is there a simple way to do this other than retyping each number?
My worksheet is attached.
How do you freeze horizontally and vertically at the same time?
View 3 Replies View RelatedIn the attached spreadsheet, I have the original data display horizontally (sheet2). Col A is Patient #. The header in row 1 are the test codes. Each patient took only 1 test and have result reported either neg, pos, pending or not eval. How do I transpose the header and have the test results consolidated in 1 column accordingly as display in sheet 3.
View 4 Replies View RelatedFor what reason would a table not extend vertically on it's own when an entry is made in the next row directly beneath it? On all of my sheets I could swear the table will automatically extend vertically, but on one workbook that has 10 duplicated and then modified sheets with tables (I mention that for it might have been something from the original that was copied that is the problem), the table easily expands horizontally when a value is placed in a column next in line, but not the same for the next row!
View 7 Replies View RelatedI am working on a pivot table just like the one on the picture here [URL] .......
Ideally I wanted the sums by date to be displayed horizontally and not vertically as shown in the picture, but was unable to do so. Anyways, I want to be able to filter those dates, so I can display data just from an specific date, and then change this date whenever I want and the new data will show up.
I tried doing by the checkbox that appears under the "data" dropdown on top of the column; However, when I uncheck a specific date, it dissapears and I have to add it again if I want to see it. Is there a way to keep the values on the dropdown even after I uncheck them? Or even another way to filter the information? Below is the pic of the dropdown I get when trying to sort the data, But as I said If I uncheck one of the values, it dissapears from the list.
[URL] ........
how do you freeze the top row (header row) so that it stays at the top of the worksheet as you scroll down?
View 3 Replies View RelatedI tried highlighting the top 2 rows and clicking 'freeze panes' but it didn't seem to freeze correctly
View 3 Replies View RelatedJust wondering if I can lock a worksheet to display the content within the window only. Eg 22 Rows by 6 Columns? Therefore stopping people tampering or moving objects?
View 10 Replies View RelatedI'm trying to get one of my macros to freeze panes in several worksheets. For some reason though, sometimes it freezes the panes in the wrong place. What could be causing this? My code basically looks like this:
View 4 Replies View RelatedIf I had =A1 in B1, could I "freeze" B1 such that its value updates ONLY upon workbook open?
View 10 Replies View RelatedI am looking to freeze row 18 in an excel sheet, however in doing so this really limits the amount of rows below row 18 that can be viewed and scrolled through.
I would like to know if there is any way that you could freeze row 18 and when you scroll down on the worksheet, you can scroll down past rows 1-17 and when row 18 reaches the top row it would lock there? And you would then be able to continue scrolling down the worksheet beyond row 18..
I am having problems with the VBA Editor freezing at the most inconvenient of times when writing code and then clicking to the Sheet I'm working on, it just freezes up the whole of Excel and it has to be shut down and opened up again.
It seems like a memory problem at first, but there is sufficient memory
( 768Mgs, OS is XP Pro, Excel 2000, 9.02).
The work is not lost becuase I'm able to Save even at PC Re-boot, fortunately.
I've tested on 2 different PC's and the same happens. The only way to avoid the freeze it seems, is before I switch to view a worksheet, is to Save then click off VBA Editor and re-open.
When doing so, another symptom is it seems a huge amount of memory is freed up, ( pardon the terminology)
There is also a message that pops up when re-opening that same workbook that there are Formulas Linked to another workbook, but unable to find any after tediously searching every worksheet by using "Find, Look in Formula" there is nothing found, yet.
This freezing may happen twice a minute whilst pointing the mouse cursor from any VBA Edit window or worksheet and it's getting to a point of repetitiously having to Save, click off VBA Editor, and Click back on again each time I need to look at a respective Worksheet.
Is there a way to freeze specific panes? I know that you can use freeze panes to freeze cells to the left and above a specified cell but I am trying to freeze specific cells. For instance I want to freeze cells A1 through K25 so that when I scroll up everything else scrolls up and when I scroll right everything else scrolls right?
View 2 Replies View RelatedAnyone know if it is possible, in VBA, to freeze the panes of a worksheet at a specific cell without selecting that worksheet or the cell.
View 9 Replies View RelatedI'm looking for a solution to freeze panes twice. That is I want to freeze row 1-15 and row 200-203. And then the rows 16-199 to be movable. In the first 15 rows I have column info so I need that visable all the time and in row 200-203 I have " Sum" of the lines 16-199 so that's why I want that to also be visible at all time. The ordinary freeze pane in excel just freezes at one certain horizontol point and I need 2. Can it be done with VBA maybe? Is it possible to insert an up/down arrow (the one you have at the right side of the screen, don't now what it's called) for the lines 16-199?
View 3 Replies View RelatedIn row 3 I have values horizontally. (A3 to Z3)
i link C5 to A3.
If I drag it vertically it does not give the correct values.
Is it possible to drag it in a correct way?
I tried =INDEX($A$3:$X$3,ROWS($A$3:$A3))
I would like to have the column titles stay so I have frozen row 1. But I would also like to freeze row 200 so I can keep up with the running totals at the bottom of the form as I fill in information. Is it possible to freeze a pain at the top and the bottom?
View 4 Replies View RelatedI need is for a block of cells (A1:I4) to be visible at all times. I've frozen the sheet so that the top four rows are always visible, but unfortunately the sheet is quite large, horizontally-speaking, so that when users scroll horizontally, important stuff scrolls off the screen.
View 9 Replies View RelatedI have a table that is frozen in b5 meaning that the first column ("A") and rows 1-4 are frozen. The table is large with ever expanding rows. What I want to do is, a good few rows down (say row 300), freeze the row at the bottom of my view and use that row as a mean average row. Therefore allowing me to enter much more data above, but constantly be able to see the averages of the data I am adding.
View 3 Replies View RelatedHow can I lock the contents of an array so that they won't disappear when using auto-filter. "Freeze Panel" doesn't seem to do the job properly.
View 9 Replies View RelatedCan we freeze particular cell and sheet means no editing is possible for those particular cell or sheet.
View 1 Replies View RelatedI am using Row 3 as a my template to insert a row for every new line of data i enter. I have a macro that copies the format and formula on this template row to insert at the end every time. The problem is on ROW 3 Cell F i am using a Today() function and everytime i insert a row the date is populated. But the next day the date automatically update.
In my search on this forum, i found this macro to supposedly lock in the dates, but i doesn't work.
VBA:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Not Intersect(Range("F2:F10000"), Target) Is Nothing Then
storage = Target.Value
Target.Value = Format(storage, "dd/mm/yy")
End If
Application.EnableEvents = True
End Sub
How can I freeze a sheet's tab location so it doesn't roll off of the screen? I have a workbook with 30 worksheets all hyperlinked off of the 1st sheet which is the INDEX sheet. The INDEX sheet only exists to make it easier for users to go directly to their desired sheet without tabbing horizontally through many sheet names. However when users use the bottom left arrow buttons to tab through the worksheets, the leftmost INDEX worksheet tab scrolls off of their screen. I realize that they can right click on the left/right tabbing arrows to see a list of all worksheet names, but it would be nice if the INDEX worksheet tab never rolled off of the horizontal tab scroll bar.
View 2 Replies View RelatedI have a progress bar on a form......it is there for no reason other than for me to practise such things...the code came off these forums and the bar is powered by a random number...
now my problem is the moment it start running i cannot do anything on the form....i would like my bar to do it's thing but still be able to click on the cancel button to get out of the form any help on this would be fantastic
Private Sub UserForm_Activate()
Dim dTime As Date
Dim i As Integer
Do Until i = 100
For i = 1 To 100 Step 100 / 8
dTime = Now + TimeValue("0:00:01")
Application.Wait TimeValue(dTime) '
ProgressBar1.Value = RandNumGen(1, 98, 1)
'AboutScreen.Repaint
Next i
'AboutScreen.Repaint
Loop
End Sub
Here is my code. When it pastes it takes so long my comp freezes up. How do i fix? ....
View 9 Replies View Related