I have a spreadsheet with a summary tab and 30 data tabs. The data tabs are named page-1 to page-30. In the summary page I have the following formula in cell C39: 'page-1'!C20
I want to be able to drag horizontally across 30 cells and have it increment to 'page-2'!C20, 'page-3'!C20 etc.,
and also drag it vertically and have it increment to 'page-1'!C21, 'page-2'!C22 etc.
I have a formula that i'd like to "click and drag" down but while i do i want it to increment through columns
a
b
c
[Code]....
in cell A1 i'd have the formula
VB: =max(c1:c5)
and it will spit out 15, that's great but when i drag the formula down i want cell A2 to give the value 20
i'd like
VB: =max(c1:c5)
to somehow turn into an equivalent
VB: =max(g1:g5)
by only dragging down, not to the side
Basically I want to see more dates, as you can see I've dropped down Cell B1 (31-Mar) to the B28 (27-Apr) Obviously if I wanted to see past 27-Apr I would just continue the drop down but I want to keep it within 28 rows and carry the dates onto cell C1-C28, D1-D28 etc, is there any way to do this using the drop down function or will I have to drop down each column individually then look date in the last row of that column and type the next date myself on the next column and drop it down?
View 1 Replies View RelatedI know I can freeze panes eithe across a column or row but is it possibleto do both at the same time so that I can have a header row and a few columns on the left of the screen frozen?
View 2 Replies View RelatedI'm trying to lock the cells of my work book both vertically and horizonatlly. There are "header criteria" on both colums and rows that I want to lock so when you scroll down or over the title bars stay. When I've done it in the past it won't let me lock both correctly.
View 7 Replies View RelatedI have a list of numbers I want to display horizontally instead of vertically. Is there a simple way to do this other than retyping each number?
My worksheet is attached.
How do you freeze horizontally and vertically at the same time?
View 3 Replies View RelatedIn the attached spreadsheet, I have the original data display horizontally (sheet2). Col A is Patient #. The header in row 1 are the test codes. Each patient took only 1 test and have result reported either neg, pos, pending or not eval. How do I transpose the header and have the test results consolidated in 1 column accordingly as display in sheet 3.
View 4 Replies View RelatedFor what reason would a table not extend vertically on it's own when an entry is made in the next row directly beneath it? On all of my sheets I could swear the table will automatically extend vertically, but on one workbook that has 10 duplicated and then modified sheets with tables (I mention that for it might have been something from the original that was copied that is the problem), the table easily expands horizontally when a value is placed in a column next in line, but not the same for the next row!
View 7 Replies View RelatedI am working on a pivot table just like the one on the picture here [URL] .......
Ideally I wanted the sums by date to be displayed horizontally and not vertically as shown in the picture, but was unable to do so. Anyways, I want to be able to filter those dates, so I can display data just from an specific date, and then change this date whenever I want and the new data will show up.
I tried doing by the checkbox that appears under the "data" dropdown on top of the column; However, when I uncheck a specific date, it dissapears and I have to add it again if I want to see it. Is there a way to keep the values on the dropdown even after I uncheck them? Or even another way to filter the information? Below is the pic of the dropdown I get when trying to sort the data, But as I said If I uncheck one of the values, it dissapears from the list.
[URL] ........
I have a percent value in cell E3, for example, then other numbers in cells H3through AA3. The formula is for all numbers in cells H3 through AA3 to be multiplied by the percent value in cell E3.
When I try to copy the formula entered in cell H3 to the rest of the cells across the same row, it does not copy as I would like. Instead of having all cells multiply cell E3, it will progress through each next cell. How can I format all cells I choose in row 3 to multiply the same cell, E3?
What I want is to be able to change the percent value in E3, for instance, and have all other cells automatically change values according to the percent they are multiplying in cell E3. I have about 160 rows I want to do this same thing in.
In one of my rows I am a referencing another sheet:
The formula is =Sheet2!e4. In the row below it I have =Sheet2!E8. Now is there a way to drag these formulas down so they keep incrementing by 4?
Im working on a financial forecast in ecxel and I'm trying to drag a formula from left to right, while referencing horizontal cells from a different tab:
Specifically, I have created a "loan schedule" which shows 12 monthly interest payments starting in cell B46 and ending in cell B57.
In a separate tab labelled "Balance Sheet", I would like to show the first interest payment ('loan schedule'!B46) in cell C28. Next, I would like to select the cell and drag it to the right so that the remaining 11 interest payments will be transferred into D29, E29, F29 etc. Unfortunately,the spreadsheet doesn't reference to the vertically listed interest payments from the loan schedule but instead references the cell to the right of the interest payment. Using "$" seems to be of no support.
Macro or formula to build a table from a data.
The data is in the following format in 4 columns: A (Customers' names), B(type of transactions: invoice,payment, Credit,Check), C (date), D(Amount).
Data is for the whole year by monthly.
I would like to build a table like this:
Column (A) 10 names of customers and in next 12 columns by month amounts and types of transactions.
I have a formula in cell A1 that I need to drag downwards so that it fills cells A2 to A10. That formula is picking up the figures located in another sheet but the figures on that sheet are arranged horizontally (A1 to J1). Is there a formula to perform this action? I've tried playing around with the $ sign in my formulas but it does not work.
View 2 Replies View Relatedb2 = a2 * 150
c2 = a2 * 145
d2 = a2 * 140
e2 = a2 * 135
[Code].....
in the first row i want to use the fill handle at 135 and drag rightwards so as to copy/retain the pattern (decrementing by 5, from multiplier 150 until 100)
how would I achieve that?
p.s I also want the formula for columns to work with the fill handle drag downwards.
Have a cell (G6) that contains the following formula, which looks up the cell adjacent to it (H6):
=IF(ISNA(VLOOKUP($H$6,Customers,2,0)),"",VLOOKUP($H$6,Customers,2,0))
I want to copy this formula to hundreds of cells below the first cell, with a formula that increments as follows:
=IF(ISNA(VLOOKUP($H$7,Customers,2,0)),"",VLOOKUP($H$7,Customers,2,0))
=IF(ISNA(VLOOKUP($H$8,Customers,2,0)),"",VLOOKUP($H$8,Customers,2,0))
=IF(ISNA(VLOOKUP($H$9,Customers,2,0)),"",VLOOKUP($H$9,Customers,2,0))
....etc.
Is there a way to copy this formula, and have it increment as shown?
I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.
So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.
In row 3 I have values horizontally. (A3 to Z3)
i link C5 to A3.
If I drag it vertically it does not give the correct values.
Is it possible to drag it in a correct way?
I tried =INDEX($A$3:$X$3,ROWS($A$3:$A3))
How can I submit the data from userform in the spreadsheet vertically like A1,A2,.....
View 9 Replies View RelatedI am trying to link from one spreadsheet to another and drag the cells down to copy the forumula, however I want to drag vertically on Sheet 1, and Copy the values horizontally from sheet 2.
For example, in sheet 1 I link cell A1 to equal cell A1 in Sheet 2. If I drag down the formula in sheet 1 A1:A10 then it will copy the values in cells A1:A10 in sheet 2.
Now what I want it to do is for me to drag the formula in cell A1 down to A10 in sheet 1, but for this to return the values of A1:J1.
The default sheets are at the bottom. I would like to move the bottom horizontal sheets to left side vertically.
How to display all sheets name at the left vertically permanently?
is it possible to concatenate the contents of several cell vertically into a single cell? like using (e.g. B47&B48&B49&B50&B51&B52) in a statement but make it vertical? and make some parts blank if it does not contain data.
(CODE)=IF(AND(A45=”1”),*CONCATENATE VERTICAL B47 to B52*, IF(AND(A45=”2”),*CONCATENATE VERTICAL D47 to D52*, IF(AND(A45=”3”),*CONCATENATE VERTICAL F47 to F52*,””)))
(please see attached file for reference)
Had a quick browse through the forums for an answer but as it is quite hard to describe i cant quite find the answer.
Basically I need to split some cells but they have stacked text in them i.e
Cell a1 shows:
666666
part 77777 x 20
5x s452563
Cell b1 shows:
1x 254684564
3x 4481211111 & 5 ea g8373
etc.
When i run the text to columns function i only get the first line of the data, i could ideally like to split the data by spaces and/ or line breaks.
I have a project that requires merging several worksheets into a "Master"worksheet in the same workbook. But because each of the worksheets have a different number of columns, I need to add each worksheet to the Master horizontally. The finished Master should appear just like each of the origional worksheets are lying side by side.
The code below adds the Master worksheet, copies each of the worksheets, and inserts it into the Master. So far so good. It does so perfectly on the first worksheet to be copied. But as it loops through the rest, the column widths get messed up. Is there any way to keep the column widths the same as the origional on my master worksheet?
Would like to know if there is a way to arrange two different sheet under the same workbook horizontally? I have used the excel help box but did not manage to find a way.
View 6 Replies View Relatedi want to pick data from every 2 columns and arrange it vertically, one under the other ;
sample data:
A 579751 579800 52151 52175 126721 126750
B 546451 546500
C 608971 609000 508081 508110 548941 548970
E 962701 962750 24851 24875
desired outcome:
A 579751 579800
52151 52175
126721 126750
B 546451 546500
C 608971 609000
508081 508110
548941 548970
E 962701 962750
24851 24875
I have many excel sheets with 1000 columns and 100,000 rows. I have to import these sheets into SAS system which wont let me import more than 250 columns per sheet (it misses the remaining columns, though rows it can import all of them). So, one solution is break each such sheets into 4 individual sheets. Ofcourse I can manually take the cursor to 250th column and copy/paste that data into another sheet and so on. But this is cumbersome and also means there is chance of mistake.
Is there a way I can divide the sheets into 4 sheets separately with each sheet having equal number of columns? Another thing I need to do is that on the top row there are company codes -most of them start with a letter which is fine. There are few which start with a number and I have to add a dummy letter x before the number. Now since there are 1000 columns, I have to scan the top row of all 1000 columns to find number codes which are scattered unevenly. So I was wondering if there is a way to tell excel to change all such number codes with extra x behind each number?
We can center horizontally with TextAlign (Left, right or center). Can we center text in a textbox on a userform vertically? I am working with multiple fonts, when a user selects a font I attempt to format a textbox as a display to show what is being created (Best WYSIWYG as I can). I have this particular font that is just ugly but is required. My textbox is set for a 12 point font but the displayed characters partially appear below the lower portion of the textbox. Think of cutting off about 1/3 of the bottom of all text in the textbox.
In my textbox it seems like the text could be moved up (some type of top margin?). All other fonts appear to display in the textbox vertically central, so I believe its the particular font selected causing the as displayed anomaly.
I know how to center text from left to right, but how about from top to bottom?
View 3 Replies View Related