New to creating macro's but looking for a macro or a function to get the below results. The first 2 columns are givens and looking to return the 3rd column. Is there any code that can do this?
Hierarchy
Path
Expected results
000000010HIER_NODE
[Code]....
Function Haversine has correct value in debugger but in cell it has the same value as Haversine2. Is this a known bug?
Public Function Haversine(lat1 As Double, long1 As Double, lat2 As Double, long2 As Double) As Double
Dim temp As Double
[Code]....
I am trying to return a TRUE or FALSE based on a date in a cell.
for example:
if cell A1 = 07/11/2009
I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.
I have tried stuff like:
=IF(A1=TODAY()-14,"True","False")
but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?
I'm trying to get a "simple" function to return a number and not the #NAME?error!
I'm writing the following vba code. It's located in the sheet1 vba code area.
On the spreadsheet itself, on sheet1, column C, there is data from row 1 down to row 55. I have tried formatting the Column as General, text,etc.
Function Asset() As String
Asset = Range("C1").End(xlDown).Row
End Function
When I type into the spreadsheet =Asset() , I get the #NAME? instead of the number 55.
When I step through in debug mode, Asset shows Asset="55" , but my function doesn't return it!
I am trying to use a function to look at the value in one cell and return a value to the cell with the functional equation. I think I use the "IF" Function. But it is a little more complicated than I can do. In my sheet, there is a number in D3. I want to create an equation in D4 that evaluates the value in D3. If D3 is between 0 and 100, I want the equation in D4 to return the value 1; If D3 is greater than 100 but less than or equal to 200, I want D4 value to be 2; if D3 greater than 200 but less than or equal to 300, D4 return 4. I would like this to continue in increments of 100 until D4 equals 10.
View 1 Replies View RelatedIs it possible to add some code that will make the function return 0 if it would otherwise return #VALUE!.
Without getting to involved here is the main piece of code.
Public Function FixedCosts(RscNum As Integer, InstYear As Long, CalcYear As Long, MW As Double)
FixedCosts = numMonths * MW * Adjust * (CapCarryCostMonthly + OtherFixedMonthly + TransCap) / 1000
When I try a MATCH function, I substituted the range through the ADDRESS function. But, it returns #VALUE error. When I manually typed the same range address, it produces the results. I've been behind this more than 8 hours still I can resist the heat on my cool head! But, I thought you coolest head guys need some heat to warm up for to-day's challenge.
View 9 Replies View RelatedI am using an array formula like this in cells A2:H100 of a worksheet:
=INDEX('Source Data'!$A$2:$Q$5000,SMALL(IF(('Source Data'!$I$2:$I$5000>=$O$1)*('Source Data'!$I$2:$I$5000<=$P$1)*('Source Data'!$M$2:$M$5000>0),ROW('Source Data'!$A$2:$Q$5000)-ROW('Source Data'!$A$2)+1,ROW($Q$5000)+1),ROW()-1),1)
The function must be present in all 99 rows to accommodate potential data, but there is rarely enough data to populate the entire sheet, leaving #REF! errors in some cells. Putting aside that using this many array formulae is sloppy programming, how do I craft the function above to return no value if the function evaluates to an #REF! error?
I am trying to use the IF function to return a false value if the combined sum of a row is not the same as either of the 1st 2 cells. If that makes any sense!
This is the formula I would like to use. =IF(SUM(g3:g9)=g1 or g2 then y if true and x if false. I thought it would be easy but I can't figure out how to do it
I have following snippet of code. it is very simple.
Code:
Sub GetDatafromXmlToTemp()
Dim str As String
Sheets("sheet1").Select
desc = WorksheetFunction.Match("FAMILY_ID", Rows("1:1"), 0) ' gives column number for ex 4 for "D"
[Code] .....
I am getting error "Argument not optional" in line.
Code:
str = ColLetter
The function "VAL" will return the value of a numerical string as a double. Is it possible to get a similar function that will return the value as a long.
View 5 Replies View RelatedI have a cell with a text string >3, and would like it to return the number (not text) 3. I could use Right but since the number will not only be single digit I don't think this will work.
View 9 Replies View RelatedI've searched for an example of function that returns a variable, however, I'm unable to find one other than the one just has return variable on the end. I was wondering what I have wrong in the following code. This is placed in a module to make it available to all my worksheets.
Public Function findLR(Worksheet, Column) As Integer
LR = Worksheet.Cells(Rows.count, Column).End(xlUp).Row
return LR
End Function
I am looking for a formula that will yield the following: IFAH9>AI9 return the word Green, IFAH9=AI9 return the word Blue, IFAH9<AI9 return the word Yellow. If AI9 is blank stay blank.
View 3 Replies View RelatedThe function Hlookup returns #N/A(?) if the value I'm looking for is not found. Is it possible to change this return-value. For exampel to #No or #No value ? I suppose I then need the code of this function? And I cannot get it?
View 1 Replies View RelatedI'm working on a spreadsheet that I need to return a value to "Unit Price" field in worksheet "Master Inventory" based on matching the "Product" field and the "Construction" field from the "Unit Pricing" worksheet.
In essence, I would like the "Unit Price" field to match the "Product" field from the "Master Inventory" sheet to the "New Product Description" field on the "Unit Pricing" sheet, then match the "Construction" field on the "Master Inventory" sheet to the column headers on the "Unit Pricing" sheet and return the value that corresponds to both criteria.
Ex: On the "Master Inventory" sheet, I would like the "Unit Price" field to match the "Product" (Book Browser) to the "New Product Description" (Book Browser) on the "Unit Pricing" sheet and then return the value where the "Construction" (Laminate) matches the column header (Laminate) on the "Unit Pricing" sheet which would return the value of "$240.00".
I've tried using a vlookup function, vlookup/match function, index/match function and an index/match/match function. I've attached a sample workbook.
a column contains dates in date format, contains a date before the column b date b column contains today() I want c column to get some output, if b-a is more than 5 years (exact days), say 20 do , if b-a is more than 2 years and less than 5 years, say 40 do , if b-a is less than 2 years , say 60 otherwise blank use if condition to get the above results. I have formatted a, b with date formats
View 9 Replies View RelatedI have attached a sheet with what I am trying to accomplish...
I have several records that I am doing a lookup through. Most records have the same "work order number". As you can see on the attached sheet, my lookup function returns all the work order numbers that match my criteria.
What I need is to only return the first instance of the work order number then return the next unique work order number that meets my criteria.
Attachment 297239!
I try to concatenate some 5 text strings and I would like to have a carriage return after each text string (ALT ENTER). How can I achieve this using =CONCATENATE(......;......;......;......;......)?
View 4 Replies View RelatedWhat I'm trying to do is get the MAX function to return a value, but that value needs to come before the values reach zero. It's a cubic equation that basically starts, at the beginning of the data range, under 10 then hits zero and ends up near 30 at the end of the data range. The end data range max doesn't matter to me if the data range hits zero along the way. Is there any way to make the MAX function stop at a certain value, or is there another function that could accomplish what I'm trying to do?
View 5 Replies View RelatedI don't really know VBA more than just piecing together other people's work (so please dumb down your responses as much as possible).
So I would like to have a function that displays a filename within a cell. The filename I need to display will start with "cost" and have a date at the end (not always the same number of characters). I need to search a folder for all files that contain that text and return the last modified one.
I found this VBA code that returns the last modified file, but only filters based on the extension (which I would like to keep in the code as well).
I am wondering about the best syntax for using a VLOOKUP return as the row number in a CORREL function. I want to create rolling correlations from today's date. I have a VLOOKUP function that will return the row number corresponding to the chosen day's date. I now need to use that returned value in the CORREL function. That is, I would like it to look something like:
=CORREL($E$VLOOKUP(today-90,AD5:AE3143, 2):$E$VLOOKUP(today,AD5:AE3143, 2),$E$VLOOKUP(today-90,AD5:AE3143, 2):$E$VLOOKUP(today,AD5:AE3143, 2))
When I enter this, I am told that I have an error. Is there a better way to nest this vlookup?
I am using Excel 2002 and trying to do something which should be simple with MATCH.
I have an array of numbers ordered, starting at 0 and incrementing by 0.05 up to 20. I am then using the MATCH function to find the relative position of numbers 0,1,2,3,4 and 5. However, for number 0,1 and 2 the return value is one less than what it should be, for the numbers 3, 4 and 5 it is working as expected. By the way, the match_type I am using is the default 1.
Also I have formatted everything to be numbers and tried various things already, so am beginning to wonder is this is a known issue.
I am trying to write a function that will return the value in cell B based on its position adjacent to cell A (above). Cell A contains its own formula and may the values may change.
View 9 Replies View RelatedI need help on using the If function. Basically I am trying to calculate the cost of shipments. For example, cost of sending 1 box is 150 (eg cell A3), 2 boxes is 280 (cell A4), 3 boxes is 400 (A5), 4 boxes is 500, etc upto to 10 boxes (cell A12).
What I am looking for is cell A1 to provide me the cost based on the manually entered value of cell A2, i.e. if I enter a number between 1 to 10 in cell A2, then A1 should return a number from A3 to A12, e.g. enter 3 in A2 then A1 should return 400.
Is there such a formula or do I have to enter manually the amounts into an If function?
Is there a way to use the INDEX function to return Blanks or NAs instead of zeros when the corresponding row & column match is a blank/null cell?
e.g. =INDEX(F10:H13,1,1) returns 0 even if cell F10 is blank?
I have a grid like follows (how to format):
2013-08-16-5.00 0 0
2013-08-16-2.0-19,902 -20,734 -21,429
2013-08-16-1.011,431 11,907 12,297
2013-08-160.0-0 0 -11
2013-08-161.0111 153 140
2013-08-162.031 61 60
[Code]...
Basically I want to return an array (to pass to another function) containing all data that matches my search. E.g. I want to retrieve an array of the data that matches 2013-09-20. Is the only way to do this a VBA func?
I need a look-up function that can return a value from an array that can be 3 to 7 rows in height. I want the function to always look at the last row in the array.
This is how it looks:
Column A Column B
blank row
1000
A
B
C
SUM 15
blank row
In this case I want the function to return 15 if I search for 1000. The problem is that there are not always a fixed number of rows beneath the searched value.
Is ther a function that will return the column letter rather thatn the column number?
View 9 Replies View RelatedI've created a Database using excel which feeds data to a pivot table I created based on it. My objective is to create a new item in this pivot table (Pivot Table > Formulas > Calculated Item) which calculates the average data for the past 6 months.
The formula I used in order to get a result is this:
=IF(((May+June+July+August+September+October)/6)=0;;(May+June+July+August+September+October)/6)
and the problem is that the answer is 0 when there is no data for all 6 months (for example, there is a customer who hasn't baught anything during the past 6 months), the pivot table displays 0, instead of not showing this customer at all. My goal is for the IF function not to return any data if the result is 0, so that the pivot table doesn't show items with no data.
I also tried:
=IF(((May+June+July+August+September+October)/6)=0;"";(May+June+July+August+September+October)/6)
and also using ;" ";
but these formulas return #VALUE! in the pivot table, given that the Data is "SUM OF Sales" and "" is not a number.
How can I get the formula not to show anything at all?
In addition to this, I was wondering if it is possible to make this formula more automated, so that it calculates the average of the past 6 months, taking into account some type of reference month (rather than having to edit the formula each time a new month is analyzed).