I have attached a sheet with what I am trying to accomplish...
I have several records that I am doing a lookup through. Most records have the same "work order number". As you can see on the attached sheet, my lookup function returns all the work order numbers that match my criteria.
What I need is to only return the first instance of the work order number then return the next unique work order number that meets my criteria.
I am attempting to get an INDEX function with multiple "IF" statements to return more than one result. Building multiple IF statements. That portion of the below formula works. However, I can only get the INDEX formula to return the first, single result.
Func_Area,Const_Start,Cost_End are all Named Ranges on Sheet "Proposed". My intention is to return a list of projects on Sheet Test1 for all projects starting construction after a certain date and completing construction before a certain date. I suspect something in my ROWS fuction or ROW-MIN+1 is wrong.
This formula returns the first result in the first row, but every subsequent row is blank...see attached spreadsheet.
I need to find a way to find an array in a tab to use for an index/match function I have.
this is what i would normally use: =index(tab_array,match($a2, tab!$a$1:$a$1000,0),match($B$1,tab!$a$1:$zz$1,0))
This formula would usually work fine when I know that within the tab, the array in which the row match is searching doesn't change. However, that array may change in the future, to say column H, without my knowing as it is a database that gets automatically populated from an upstream system.
Is there a way to search for an array within an index/match?
I currently have a worksheet where I want to input a date (G2) and a rank value (H2) ranging from 1 to 4. The header value (B1:E1) corresponding to the date (A2:A4) and the rank (B2:B4) should be returned to I2 (currently returns #NA).
Using formula: =INDEX($B$1:$E$1,MATCH(H2,INDEX($B$2:$E$4,MATCH(G2,$A$2:$A$4),)))
which I found under: Find row, find value, then return column heading
However, the above formula does not seem to work with my date order or recurring data values of 1 to 4 over the 3 rows.
The worksheet layout is as follows:
Date
A
B C D
Date
Rank
Header
[code]....
The return value under Header should be C.
I have reversed the order of the dates and put sequential numbers in B2:B4 as plug variables and the above formula will return the correct Header value but I need the formula to work with the current date order and repeating rank values of 1 to 4 in B2:B4. Do not wish to use VBA.
I have a multiple column spreadsheet (Call it- "Money") whereby I need the data identified based on a list of account numbers and return this data to a new sheet.
In "Money" I have:
IE; columns B, C respectively have cust #A100 & 20.00 columns E, F respectively have cust #B100 & 40.00 columns G,H respectively have cust #C100 & 60.00 Etc.
(above for illustration-there are 100 lines of data in these columns with varied account numbers and respective dollars)
So what I have now is a new sheet I have named "Control". I have listed all my account numbers like A100,B100 etc. in column A. These are the account numbers for ident purposes.
I need the data entered in "Money" identified by those columns B,E,G with respective amounts from C,F,H and based on the list I have in "Control" whereby in "Control" if A100 is listed in column A then the figure to be returned in column B is all the data bits found in all columns C,F,H from the entire sheet "Money". Tough to explain but ie below....
I'm using the following formula to look at a range of cells and return the most common text entry. The formula works fine as long as there is text; if there are more blank cells than entries, then it returns a 'blank' and my formula cell is empty. How to clean this up so that it ignores blank cells?
I have a formula that needs to return blanks as blank and 0s as 0. The vlookup formula will return blanks as 0, or I can make it return a blank whenever it is zero (below), but some cells may have a 0 record that need to return 0s, not blank.
Right now I am missing a few records that are entered as "0". I have:
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in Match: Lookup value = $E3 Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1 match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4 Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452 match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
see the attached. The array formulas in B2:C3 are operating on the table in E2:F5. These are quite simple formulas as you'll see.
The formula in B3 is identical to that in B2 apart from the fact that the first array is wrapped in an IFERROR (there are actually no errors in the array, but that's not the point).
As you can see, the formula in B2 evaluates E3 as ="", and so the corresponding entry in F3 is ignored in the sum. Quite normal.
However, the identical formula, but with an IFERROR first acting on Array1 now evaluates the same cell as <>"", and so F3 is this time included in the sum.
What action has the IFERROR had on this array? Clearly, E3 is not an error, so a "blank" should still be passed, unchanged, to the function.
I have included identical versions of the formulas, but with Named Ranges replacing the actual range references. The reason is that, with these versions, if you step through the formulas with Evaluate Formula, for example with the formula in C2, you can see that Excel "temporarily interprets" the blank in E3 as a zero (this is nothing new, though I've never fully understood why it can't display a "" here as well) before then equating this "zero" as being a "blank".
Perhaps somehow, after being passed to the IFERROR, this "zero" is processed so that, when passed on, even though it still “displays” as a zero, for some reason it is no longer considered equivalent to "".
I have two active worksheets. The first one is called 'Chart' and the second is 'Values'. I have three columns of data. I would like to look in the first two, and return a value in the third. =INDEX(Values!$C$1:$C$299,MATCH(Values!$D$1:$D$299,LEFT(Chart!A1:A16091,6)&" "&LEFT(Chart!C1:C16091,2)),0) .........
I need to return the index based on values from 2 columns with largest amounts, below the example: From the below table, the index I need returned will be "Purchasing Data Inquiry" because even though this one does not have the biggest % has more number of hits (51) based in column D. So I need a comparison of column D and E to subtract the Index.
I am very competent using the index match formula and have incorporated this into many spreadsheets to auto-fill for avoiding input errors. The objective I am attempting now is to retrieve from a list of 2800 entries the smallest return on an index match formula.
From the data below if my Index Match formula uses C1 to index and match my return is always a7 (-12.7) the first in the list, where my desire is a return of a19 (-14.11). To complex this problem I often have duplicate amounts that need to be listed when they fall into my parameters. I have figured that the Small function allows me to assign first smallest, second smallest, and so forth.
I prefer not to use vlookup for simplicity and error avoidance issues.
how to go about this, as I always get confused with Index and Match. In my example, in col A I have the Beginning of a period, Column B is the End of the Period, and the amount to be matched is in Column D. Range A1 to E4 is the source data. Below that, starting from A9 to A37 are dates. I would like to match the corresponding value in range D2:D3 if the date in range in A9 : A37 falls between the period stated in A2:B3. I've listed how the values should appear in C9:C37.
What I want to do is, given the data in col. a, I want to supply a number(range) of strings which can be found in column a, whenever a string is found, which exists in given range, I want to write the string from the Key(col. c) in col b instead of the value from the string that matches a value.
See below for example of what I got working but not exactly what I was looking for
Col. A- Data Orangegreen Blackwhite Blueyellow
Col. B - Result
Col. C - Keys Orange White Yellow
I used
Code: =INDEX(A1:A3,MATCH("*"&C1&"*",A1:A3,0))
This does produce a result, but not entirely what I am after.
This requires only one string to search for, and will in cell B1 result in a value of 'Orangegreen' as I can only supply one valeu to the function. What I want to do is supply the function with a range of values, and have those values outputtet in colb instead af the value of cells where the result is found.
I tried modifying the function to include a range, but that does not produce a valid result.
In column B I enter a date when a student attended tutoring. In column C I enter the name of a student attending the tutoring.
In cell D4, I will be entering a student name
In cells D5:D55 I'd like a formula that transposes the dates (if any) that a student attended tutoring. So if a student has their name appear beside the dates ... 14-Feb, 22-Mar, 24-Mar .... then I'd like those three dates to appear in cells D%, D6 and D7.
How to formulate this ... I'm guessing it's going to involve an index-match formula.
I have a table with a couple thousand rows. I am having trouble writing an index and match to return multiple matches.
I want to use the value in Column 1 (Search Name) to search through Column 2 (Code) and when it finds a match, return the matches from the Return Item column.
Not all of them will have a match (A1AT), but some of them will have multiple matches (ALB2).
Would the output be horizontal across? Where the various matches would come under columns 4, 5, 6, etc.
So this looks for the dates found in C1 and D1, finds them in B1:B10, and returns the corresponding cells in A1:A10 for the array part of the PERCENTILE syntax.
I think the issue is that the lookup will return the value in A1:A10 rather than using the cell reference for the PERCENTILE.INC function...
I have an array formula which is working as expected returning the value of column K (offset by -1) if a number of criteria are matched.
[Code].....
The issue I'm having is there are occasionally duplicate values in column W and it's using the first value in its return, which isn't always correct.
Unfortunately due to the limited matches available the only way I can think to identify the correct value is by adding an additional criteria, which is that the correct value would always have a negative in Column X one cell above and to the right of where the value is being retrieved from. If there was no negative it would ignore this result.
Is there any way to add an additional criteria to the formula to stipulate that it must match a negative in column X but one cell above?
I am currently looking at a simple data set spanning a few years of annual average data. I want to create a front sheet to show people in what year the maximum value was reached for each site but am having trouble returning the values......
The summary sheet is headed:...... I want the formula to say - find the summary sheet max value cell in the main data sheet row 2 (for XYZ) and return the corresponding column from row 1 (year). I've got myself in a muddle trying to create array data from the index function and want something simple. There are only about 30 rows so am happy to manually select the rows in question and repeat the formula entry so it doesn't need to be fancy.
I have a dataset of a few hundred rows, but will only provide a small sample of rows for this example.
I need INDEX/MATCH to return the correct values for the subset below.
Column A (Forecast Status) - Column B (Account Name) Commit - Account01 (Row 1) Commit - Account02 (Row 2) Won - Account03 (Row 3) Won - Account04 (Row 4) Won - Account05 (Row 5) Upside - Account06 (Row 6) Lost - Account07 (Row 7) Upside - Account08 (Row 8) Won - Account09 (Row 9) Commit - Account10 (Row 10)
In a new tab, I am creating a 'dashboard' view that will group each of the following:
Commit ONLY Accounts in cell A1 (Formula to be copied down to retrieve Rows 1,2,10) Won ONLY Accounts in B1. (Formula to be copied down to retrieve Rows 3,4,5,9) Upside ONLY Accounts in C1. (Formula to be copied down to retrieve Rows 6,8) Lost ONLY Accounts in D1. (Formula to be copied down to retrieve Rows 7)