I need to figure out how to match three values on the "source info.xls" file attached to the "PFG FILE.xls" that is also attached. In column A in the "Source info.xls" file the formula will need to match the yellow column, then the green column, then the red column. keep in mind that the attached files are just a small subset of data. The "PFG File.XLS" is actually 150K rows long.
View 5 RepliesI need to find a way to find an array in a tab to use for an index/match function I have.
this is what i would normally use: =index(tab_array,match($a2, tab!$a$1:$a$1000,0),match($B$1,tab!$a$1:$zz$1,0))
This formula would usually work fine when I know that within the tab, the array in which the row match is searching doesn't change. However, that array may change in the future, to say column H, without my knowing as it is a database that gets automatically populated from an upstream system.
Is there a way to search for an array within an index/match?
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
I have a master spreadsheet which shows agreeed rentals for vehicles, on the sample this is the "OCS" tab. I receive a spreadsheet which contains the actual rental charged, in my example this is the tab "Invoice" in my example the VRN are in the same order on both sheets, in reality the invoice spreadsheet is not in the same order as my OCS sheet. My task is to match the VRN field in the invoice sheet to the VRN in the OCS sheet, then look at the amounts and if they match then return "true" if they don't return "false
View 2 Replies View Related I'm trying to create a rec report, ideally on one page, for multiple criteria. The situation is we get a report on our trade positions (investment stuff) from an outside service we use. We also have a report internally from what we've booked. We're looking to tie out are basic things like price, original par, revised par, trade date, counter-party banks, etc. I've consolidated data from both sources on one page (DATA) where all data points are lined up (say EXTERNAL is from rows 1-500, and INTERNAL is 510-1010). Now I need to create a front page showing the result of each tie-out. The lookup value will be a combination of the fund name + trade ticket number which would almost guarantee a unique ID (fund name XYZ, ticket number 12345 = XYZ12345)
Current tabs on spreadsheet: DATA, EXTERNAL, INTERNAL. I need to add a REC page
Question: What formula can I use to check on each and return TRUE/FALSE? The goal is to have about 8 columns on the REC, each for one of the tie-outs (let's use price as an example.). I know the basic VLOOKUP to return one value, but it appears in this case I will need VLOOKUP to check two matching values based on unique ID XZY12345, compare the price, and return TRUE if they match, FALSE if they don't
Here's something I saw from one of our spreadsheets that I think does the same to confirm counter-party, though I have no idea how to read this lengthy formula.
=EXACT(VLOOKUP(IF(Q2="COMPANY",R2,Q2),FUNDS!$M$1:$N$400,2,FALSE),
INDEX(PENDING!$G$4:$G$3218,MATCH(CP!C2,PENDING!$N$4:$N$3218,0)))
I'm trying to determine if a rangeName is defined so that I can delete it without a programming error. I've used the idea that if I try to goto a non-existant rangeName, I'll get an error. I've tried to design a function that will return true or false if the rangeName is defined on the basis of that idea. Can you take a look at the code and see where I went wrong?
View 4 Replies View RelatedHere's my formula:
=AND([@[Tenure (Yrs)]]>=5,[@[2016 Sales]]>=150000)
(Where should I enter high and low? Do I need an if formula nested into it?)
I'm trying to get it to read if the customer reads both criteria which is they've been there 5 years and over 150000 sales =
High if not Low.
I need to check one column to see if it is less than another one
If it is I need to have the IF function return specific criteria for true and then for false but then I also need it to rely on the results of another question from another column if the result of the first query is less than the figure in another column again I need to return specific criteria for tur and then for false
An AND function requires both to be true but when one isnt what do I write?
I have created a userdefined function. the Idea is for the user to calculate the difference in hours and minutes. The input would be like budtime = 30 , realtime = 1.25 the answer I would like to have is 28:45 (28hours and 45 mins). Im aware that I can format the cell manually with [h]:mm but I'd like the function to do it.
I have written this:
Function RT(BudTime, RealTime)
RT = Format(((CDec(BudTime) - CDec(RealTime) / 24)), "[h]:mm")
End Function
I am trying to return a TRUE or FALSE based on a date in a cell.
for example:
if cell A1 = 07/11/2009
I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.
I have tried stuff like:
=IF(A1=TODAY()-14,"True","False")
but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?
I have long text values that include names in cells A1:A100.
In cell D1:D10, I have a list of names that I would like to check if any of them is found in each of the cells in A1:A100 and if yes, return TRUE in column B.
So in a way, what I need is a a bit like the SEARCH function, only that I need to find multiple FIND_TEXT values. If just one of the names in D1:D10 is found, the formula should return TRUE.
I have number data in columns F through AK. In column AL I want a formula that will look in columns F through AK from the left to right. Once it identifies a positive value I want the formula to identify if after that positive number there are any occurances where there are 6 0's in a row (anywhere up until column AK). The formula can return a True or False. I want to drag the formula down across many rows of data. If the entire row contains 0's, I do not want it identified as a TRUE
View 9 Replies View RelatedI have two data columns: the first is a list of the last 100 calendar dates, and the second is an ON/OFF (or 1/0 if you prefer) value corresponding to each date. If the last value in the second column list is ON, I want to find how many continuous days the value has been ON for. If the last value in the second column is OFF, I want it to return a zero. Note that in the 100 day span of data, the value may switch between ON and OFF several times, but I only want the continuous, uninterrupted ON days at the end of the date range.
View 8 Replies View RelatedThe short version:
(69.1*SQRT(((Shops!$X$2:$X$341-C3)^2)+0.06*((Shops!$Y$2:$Y$341-D3)^2))<=25))) evaluates out to series of 340 True and Falses. I need to be able to pull the nth True, and then somehow index that against AH2:341.
I'm working with a record of 53,000 entries with latitudes and longitudes and I need to cross compare them with 341 locations in the United States.
I've already done some of the heavy lifting, which supported narrow an initial list of 85,000 records to at least recognize which records where within any of the 341 points. (Less arrays makes my computer happy.)
This formula gives me the count of locations each entry is within one of the 341:
=SUM(IF(69.1*SQRT(((Shops!$X$2:$X$341-C3)^2)+0.06*((Shops!$Y$2:$Y$341-D3)^2))<=25,1,0)) {CSE} & copied down 53k times
The actual return range is AH2:AH341 for the location number.
Now, I need to be able to list each of the 341 they are close to. The max count is 17, so I'll only need to list out 17 columns.
Maybe something like =LOOKUP(1,1/(69.1*SQRT(((Shops!$X$2:$X$341-C3)^2)+0.06*((Shops!$Y$2:$Y$341-D3)^2))<=25))),$AH$2:$AH$341)
but this only returns the first match. How do I return the 2nd, 3rd, 4th, etc?
Because of the sensitive nature of my data, we can use a much simpler array which I'll adapt; I'm mostly trying to understand the logic or formula that should be used.
Return Nth Match.xlsx
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
I am trying to replicate the following code using Cells references so that the row can be made a variable. I basically want to make the search array smaller with each loop.
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250"), 0)
The above works, the following two variations don't:
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range(Cells(ArrayStart, 2), Cells(250,2), 0)
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250").Item(ArrayStart, 2), 0)
Solution for all: {=SUMPRODUCT(SUMIF(Sheet1!$A$2:$A$16,$F$34:$F$40,INDEX(Sheet1!$B$2:$K$16,0,MATCH(T$10,Sheet1!$B$1:$K $1,0))),U34:U40)}
Say I have an Excel workbook with two sheets: Employee Hours and Employee Wages. On the Hours sheet I have 31 columns (Jan1 - Jan31) with inputs for the number of hours worked by each employee by day. On the Wages sheet I have listed the same 31 columns with their wages each day (I do this to factor in wage increases that occur fairly often).
My goal is to use an INDEX/MATCH function to calculate the total daily compensation for each day on the Wages sheet by multiplying hours*wages for all employees that day. Here's the code I'm using:
Here is the table I am working with
Date
Open
High
Low
Close
Volume
Adj Close
Semi-Annual Yield
Theoretical Bond Price
Index
Coupon
Total Value
Peaks
Troughs
[Code] ..........
The Relevant columns would be "Date" column A cell 1, "Total Value" column L cell 1, "Peaks" column M cell 1, and "Troughs" column N cell 1. What I basically want to do, in the next column, column O, is this: If cell N# = "Trough" find the previous M cell = "Peak" and take the L cell in that "Peak" row and subtract the L cell in the Trough row from it (like =(L4-L9)/L4)). Then in column P, if the percentage drop was 5% or greater, I want to find the days between the trough we are looking at, in cell n10, and the NEXT Peak, cell M11, using the corresponding dates in Column A.
I'm using a formula (with the SUMPRODUCT function) within which I need to match the month & year from an array with 3 "true" possibilities...
Meaning that if data (month & year) from the array matches any of the 3 months & year of a specific quarter (for example July 08, August 08, September 08), the result of that section should be "True".
The data to be matched (any of the 3 months of each quarter) is drawn from a table header (showing every month of the year) by using this "monthly" formula:
TEXT(H7;"mm.yyyy") where H7 holds "01.07.2008" (but displays "Jul. 08") and returns "07.2008".
I'm trying to extend it to something like:
TEXT({H$7;I$7;J$7};"mm.yyyy") to match either July 2008 (H7), August 2008 (I7) or September 2008 (J7) for the 3rd quarter of 2008 but when I hit Enter, I get an error and H$7 is highlighted ("ctrl + shift + enter" doesn't help).
Here's an excerpt of the formula that works well for other queries on my worksheet:
=SUMPRODUCT(--(TEXT('Current update analysis'!$O$2:OFFSET('Current update analysis'!$O$2;(COUNTA('Current update analysis'!$B:$B)+20);"mm.yyyy")=TEXT({H$7;I$7;J$7};"mm.yyyy")); --('Current update analysis'!$k$2:OFFSET('Current update analysis'!$k$2;(COUNTA('Current update analysis'!$B:$B)+20)="ok"))
how I could/should structure the formula for it to work?
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
I have a grid like follows (how to format):
2013-08-16-5.00 0 0
2013-08-16-2.0-19,902 -20,734 -21,429
2013-08-16-1.011,431 11,907 12,297
2013-08-160.0-0 0 -11
2013-08-161.0111 153 140
2013-08-162.031 61 60
[Code]...
Basically I want to return an array (to pass to another function) containing all data that matches my search. E.g. I want to retrieve an array of the data that matches 2013-09-20. Is the only way to do this a VBA func?
I need a look-up function that can return a value from an array that can be 3 to 7 rows in height. I want the function to always look at the last row in the array.
This is how it looks:
Column A Column B
blank row
1000
A
B
C
SUM 15
blank row
In this case I want the function to return 15 if I search for 1000. The problem is that there are not always a fixed number of rows beneath the searched value.
I have the following data; B1 and B2 are entered by the user and are named 'heat' and 'race' respectively. Conditional Array Formula Example.xlsx I'm after the ROW number that matches the minimum time (col C) for the heat and race combination shown - in the example below (heat: A, race: 100m), I'd like row '5' returned (or, better still, row '2' of the array A4:D11), as that's the lowest time for Heat A, 100m.
A
B
C
D
[Code].....
but this dosesn't exactly seem elegant, and doesn't work!
ie I simply want the row number (ideally relative to the range) for the lowest time for any given inputs 'Race' and 'Heat'.
I am trying to write a function that returns a single dimension array from inputed data. I want this to work for any data, i.e. a single cell, an array in vba or a range. I am using the "for each" staement. However, when I pass an array in the "for each" returns the same range, rather than the elements of the range. I've played around a bit, and the "for each" does what I want on an range if I am not passing the range to a function. Is it because I am passing the range into a function as a variant? Here is the code for the function.
Public Function CreateSingleDimensionArray(ByVal dataToConvert) As Variant
Dim vHolder As Variant
Dim vArray As Variant
Dim lElementCount As Long
lElementCount = 0
For Each vHolder In dataToConvert
lElementCount = lElementCount + 1
Redim vArray(1 To lElementCount)
vArray(lElementCount) = vHolder
Next vHolder
CreateSingleDimensionArray = vArray
End Function
I am using Excel 2002 and trying to do something which should be simple with MATCH.
I have an array of numbers ordered, starting at 0 and incrementing by 0.05 up to 20. I am then using the MATCH function to find the relative position of numbers 0,1,2,3,4 and 5. However, for number 0,1 and 2 the return value is one less than what it should be, for the numbers 3, 4 and 5 it is working as expected. By the way, the match_type I am using is the default 1.
Also I have formatted everything to be numbers and tried various things already, so am beginning to wonder is this is a known issue.
I would like to write a formula to return a value from a column that relates to an array within which my lookup value exists. See the tables below:
ID
V1
V2
V3
105
27
3
149
[Code] .......
The tables above are on different sheets within a workbook. I would like to write a formula that returns the "ID" numbers from column "A" in the first table, based on values in columns B-D in that first table, into column "C" in the second table. For example, in this case, the ID number that corresponds with the value "12491" would be "109", since 12491 corresponds with 109 in the first table.
FYI, the "Value" numbers in the second table are calculated based on their rank (high-low) within the matrix in the first table.
I tried the INDEX-MATCH function, but it doesn't seem to work if I'm trying to find a value within a 2-D array- it only works if I'm looking in a single column.
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
Question contained within code:
Code:
Dim MyArray(6, 1) As String
Dim i As Integer
'' Array List 1
[Code]....
'If lbxLI = any list index from Array List 1 then use the value stored in Array List 2 to give Listbox 2 its rowsource.
'For example; ListIndex "0" would produce a row source "_0" for listbox 2. Else if ListIndex "1" is selected, produce row source "_1" for listbox 2.
' I would like to achieve this from one "If" statement. I'm guessing it must be possible using a loop, I just can't think how despite a lot of messing about with code.
I'm trying to figure out how to write a VBA Match function that can look for multiple criteria and return the row number of a successful match.
I have about 255,000 rows of data on the worksheet "Filtered". Column B contains my Item Number and Column D contains the supply source. I want to find the row where ItemNumber and SupplySource match my variables and then return the value from Column C.
I can do a match for one criteria, but where I'm having problems is getting it so the two matches are on the same row.