How To Match Array Values To Other Array Values
Oct 22, 2013
Question contained within code:
Code:
Dim MyArray(6, 1) As String
Dim i As Integer
'' Array List 1
[Code]....
'If lbxLI = any list index from Array List 1 then use the value stored in Array List 2 to give Listbox 2 its rowsource.
'For example; ListIndex "0" would produce a row source "_0" for listbox 2. Else if ListIndex "1" is selected, produce row source "_1" for listbox 2.
' I would like to achieve this from one "If" statement. I'm guessing it must be possible using a loop, I just can't think how despite a lot of messing about with code.
View 1 Replies
ADVERTISEMENT
Jan 18, 2014
I'm using this formula to lookup data based on the lowest average.
[Code] .....
The problem is that the minimum average is a two way tie, and I need to return both data sets. It just happens to have the same average.
I've tried using SMALL(array,1) and SMALL(array,2) in place of MIN above, but it gives me the same data set. I've also tried resizing using offset.
See attached : sample.xls
View 6 Replies
View Related
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Jan 26, 2010
I need to figure out how to match three values on the "source info.xls" file attached to the "PFG FILE.xls" that is also attached. In column A in the "Source info.xls" file the formula will need to match the yellow column, then the green column, then the red column. keep in mind that the attached files are just a small subset of data. The "PFG File.XLS" is actually 150K rows long.
View 5 Replies
View Related
Apr 7, 2009
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View 6 Replies
View Related
Aug 3, 2006
i have a very large spreadsheet filled with telephone numberS and some other codes that go with them...i need to match the codes with the phone numbers.
Sub TRCO()
Dim TNs As Long
Dim i As Long
Dim TempArray() As String
Dim TRCO As String
Dim CD03 As String
Dim ASOC As Range
TRCO = "TRCO"
CD03 = "CD034DF1"
'Filter TN's
Columns("B:B").EntireColumn.Insert
Set tempRange = Range("A6", Range("A65000").End(xlUp))
With tempRange
. AdvancedFilter _...................
View 2 Replies
View Related
Nov 6, 2013
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
View 5 Replies
View Related
Jul 30, 2014
This formula's array
=IF(COUNTIF($A$2:$B$12,$A$2:$B$12)=1,COLUMN($A$2:$B$12)-COLUMN($A$1)+1)
returns
{FALSE,FALSE;FALSE,2;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;1,2;FALSE,FALSE;1,2;1,2;1,FALSE;1,FALSE}
This is the column number for each TRUE value
What I want to know is when I drag the formula down how can I obtain the values from left to right? ie:
2
1
2
1
2
1
2
1
1
View 9 Replies
View Related
Apr 3, 2014
I am trying to declare a public (or global) array and it's values so I don't have to keep dimensioning it for each function I create.
I was trying things such as:
Public whatever(10) as string
whatever(0) = "something"
whatever(1) = "somethin else"
....
And tried creating an initialize macro in "ThisWorkbook".
View 11 Replies
View Related
Apr 8, 2014
I am trying to store values into a dynamic array. The size of the array will vary each time, so I need the range to be dynamic. Most importantly, I need all values to be retained in the array. Currently, a value will be stored, but once the next round of the for loop is initiated, the array changes to "<subscript out of range>" and stays that way until the it is replaced by the next value. So, there isn't an accumualtion in the array--it goes one value, to out of range, to one value, etc.
View 8 Replies
View Related
Jun 23, 2014
I am using a macro to concatenate and sum values in a worksheet. It uses an array function in which it uses column numbers to put values in an array. With the column numbers "hardcoded" in the macro (e.g. myKeys = Array(1)), it works fine. But, when I created a userform so that I can change the values based on user input, I get a "Type Mismatch" error.
Attached is the workbook with both the working and non-working macro. Button labeled "No Form" is the one that is working, button labeled "Form" does work.
View 2 Replies
View Related
Jun 16, 2009
I am trying to simply place my array of values onto the worksheet.
I had read, and thought that the following would work:
View 2 Replies
View Related
Nov 5, 2008
I've been manually writing IF statements out for ranges of data that could easily be done with a little array work. So I set out to convert all my functions into something more readable and quicker to write. But I ran into a problem. I want to add the values of an array G45:Z45 if the corresponding values in G44:Z45 are less than or equal to P41. So I thought to use a SUMIF:
=SUMIF(G44:Z45,<=+P41,G45:Z45)
That didn't work, in fact, it didn't come error free until I did:
=SUMIF(G44:Z45,"<="+P41,G45:Z45)
But that doesn't add anything up either. From what I can see, the problem lies within the condition. If I simply put P41, it works. The moment I add <= I get a multitude of problems.
View 2 Replies
View Related
Mar 14, 2012
I'm trying to count the number of times "Y" occurs in column H and one of four values occurs in column B. I'm new at writing arrays and what I have so far is:
{=SUM((Main!$H$4:$H$700="Y")*OR(Main$B$4:$B$700="FGZ","FHZ","FLZ","NAV"))}.
This is returning a #VALUE error. A
View 5 Replies
View Related
Jul 23, 2013
I have an array defined from 1 to 100; however, only six elements of the array have a value. I need to add a value in between the ones already in the array. I have tried this snippet already with no luck.
Code:
For Z = a To MinPos
WOList(Z + 1).F1 = WOList(Z).F1
Next Z
WOList(MinPos).F1 = CalcValue
A is defined as the total number of elements with values in the array (6 values in this example). MinPos is defined as the location of which the value needs to be inserted (lets say index 2). I tried to shift all the elements to the right one, and add the number into the array.
View 4 Replies
View Related
Aug 15, 2013
I have Column A which is an Employees birth Year, Column B which is salary, and Column C which is a list of Years.
I need a formula to read the Year in Column C, refer to Column A finding all the rows that match that year, than refer to Column B (salaries) and find the average of the salaries.
View 1 Replies
View Related
May 9, 2014
I have been trying to set up a macro to find the Minimum and Maximum values from an array of temperatures for painting... so far, partially successful.
The problems I am having are that the values have 1 decimal place and can be anywhere between 22.7 to -1.4. When they come they are put on the spreadsheet, the MinTemp can be 10.0 and MaxTemp 9.9, totally reversed.
Dim Info(2000, 2) As String
Dim MonthValue(31, 9) As Variant
Dim Working1 As Date
Dim I As Integer
Dim J As Integer
Dim Tot As Integer
[code]....
View 2 Replies
View Related
May 16, 2014
Presently I calculate a worksheet and store the result in any array the size of which is determined at the start. I then enter all the results in a worksheet and get the max and min values and numerous other data. I am trying to find a way to get the max and min values without having to enter the data to speed the routine up.
this is the code that puts the results into a worksheet.
Code:
Sub Recalculate() 'Recalculates the WorkBook
Dim Calc_
Worksheets(startSht).Select
Set Output = Application.InputBox(prompt:="Please select the 1st Output Range.", Title:="SPECIFY RANGE", Type:=8)
Set OutPutLabel = Application.InputBox(prompt:="Please select Label for
[Code]....
View 1 Replies
View Related
May 14, 2007
I have a list of data in a range on an Excel worksheet.
I want to create a macro that searches the range e.g. $A$1:$A$10 and identifies the unique cell values into an array.
So if range data = "A,B,B,C,C,D,D,D,E" I would end up with an array containing 5 items "A,B,C,D,E".
I would then like to cycle through each array item and bring up a message box displaying the value of each array item.
View 9 Replies
View Related
Mar 27, 2008
Is it possible to add cell values to an array i.e. Array(cells(1,1).value,Cells(2,1).value)
View 9 Replies
View Related
Aug 6, 2008
I am trying to loop through some rows within a worksheet in an effort to make sure the values match a list of values that are defined in an array. However, when I get to the IF statement, I always get a 'Type Mismatch' error.
Dim varRetailers
varRetailers = Array("Depot", "Lowes", "Sears", "TSC", "Walmart", "Z-Other")
For c = rowDataStart To rowDataEnd
If Cells(c, colRetailCat) varRetailers Then '
View 9 Replies
View Related
Aug 17, 2009
I have made an array of variables and pasted them into another sheet using the range().value = myarray command. When I use the following command to put the values from this pasted set of variables into another array: ...
View 9 Replies
View Related
Aug 19, 2009
I have a spreadsheet of information (product codes and values) and want to use VBA to find the top ten list of products by value. The list of products is variable in length so I can pass the data to a two-dimensioned array.
How do I ask VBA to return the top ten products by value - there can be duplicate values so I just want ten (if there are 4 #9s, I just want two of them, any two)?
View 9 Replies
View Related
Aug 23, 2008
how to set all values in an array to be the same value. Currently I am using code in a For/Next loop like the following to do this:
Sub testing()
Dim ArrayToAllHaveSameValues(1 To 30) As String, i As Integer
For i = 1 To 30
ArrayToAllHaveSameValues(i) = "Value"
Next i
End Sub
View 7 Replies
View Related
Jul 31, 2006
I am have a 4x2 table and would like to use the values in the table in numerous procedures. i feel the best way do to this is to record the table as an array and be able to 'paste' or call the array anytime i need to. However, i am unable to read the table into an array.
1. how the array works,
2. how i can read values into an array and
3. how can i 'paste' or call the array at a later stage.
View 4 Replies
View Related
Nov 1, 2006
I would like to fullfil a range a cell with different strings. As the cells are jointed to each others, I would like to pass the string array to the range and not to pass each string to each cell, to spend time.
I mean, with the function
Dim stTxt(3) As String
range(Cells(1,1),Cells(3,1)).value=stTxt()
But I have some difficulties with this function:
-if the range is a column, the function works, but if the range is a row, then only the first value of the array is passed, and to all the cells of the range
-I didn't manage to use this function when using
Range(Cells(x,y),Cells(z,t))
and when the range is in another worksheet. I need to use
Cells(x,y).resize(z-x,t-y)
(I'm using Excel 2000).
how I can pass correctly my string array to a row of cells? (cf 1. point).
View 5 Replies
View Related
Mar 27, 2007
I'd like to know if exist a procedure/ function to find a argument in an array and return the index/address of the argument at the array.
For example, I have a array contaning a list of products. i'd to create a function that finds the index of a particular/list of products, feeded as arguments, and returns the indexes locations.
View 9 Replies
View Related
Apr 30, 2007
I am trying to assign a range of values with different types( date,time,integer) to an array. I am using the following command which works fine.
Dim vArr() As Variant
vArr=range("A1"). currentregion.value
However when I try to print the "time formatted" values in the second column of the range I can't. I can't use timevalue function as well cause it doesn't treat the values as string but integers. Why is this happening even when I declare the array as variant?
View 2 Replies
View Related
May 2, 2007
I am trying to assign a range of values with different types( date, time,integer) to an array. I am using the following command which works fine.
Dim vArr() As Variant
vArr=range("A1"). currentregion.value
However when I try to print the "time formatted" values in the second column of the range I can't. I can't use timevalue function as well cause it doesn't treat the values as string but integers. Why is this happening even when I declare the array as variant?
View 6 Replies
View Related
Jan 25, 2013
How can I obtain the array values from a function?
For example: Those steps were made by cytop to split a text (btw it works perfecet!!), I just added Function splitText(strSplit As Variant) As Variant ... End Function
VB:
Function splitText(strSplit As Variant) As Variant
Dim datosColumnaIncio() As Variant
Dim iTemp As Integer
Redim datosColumnaIncio(Len(strSplit) - 1)
For iTemp = 1 To Len(strSplit)
datosColumnaIncio(iTemp - 1) = Mid$(strSplit, iTemp, 1)
Next
End Function
So I want to know if its correct like that:
VB:
Function splitText(strSplit As Variant) As Variant
Dim datosColumnaIncio() As Variant
Dim iTemp As Integer
[Code] .....
So when I call the function:
VB : MsgBox splitText("F4")
It throws an error message :s what is wrong or how can I get the array values of a function ???
View 2 Replies
View Related
