Get Vlookup In Vba Working

Apr 11, 2007

I have 3 sheets ("zip", "report", "ches") in a workbook

I want "ches" column A to be filled with data from "report" column D if there is a match of "zip" cell A12 from "report" column S

I keep getting the error
"unable to get the Vlookup property of the WorksheetFunction class"

Private Sub Worksheet_Change(ByVal Target As Range)

Dim myRange As Range
Dim myRange1 As Range

Set myRange = ActiveWorkbook.Worksheets("report").Range("A1:S65536")
Set myRange1 = ActiveWorkbook.Worksheets("ches").Range("a65536").End(xlUp).Offset(1, 0)

myRange1.Value = Application.WorksheetFunction.VLookup(ActiveWorkbook.Worksheets("zip").Range("a12"), myRange, 4)
End Sub

View 9 Replies


ADVERTISEMENT

Vlookup Not Working

May 7, 2009

I have a vlookup that returns an #N/A error due to the table array originally being formatted as text. The data is simply a two or three digit number.

I have tried everything I can think of to get the table array to equal the lookup value.

I formated cell to number. I tried tab delimated/finish. I tried typing a 1 in a different cell and doing a paste special then multiply. I tried copying to a different worksheet. I just cannot get it to work.

View 9 Replies View Related

VLOOKUP Not Working Because Of Too Much Text

May 14, 2014

VLOOKUP will only work to a set limit number of text characters in a cell. So I can search for the value "*orange*" if the cells contain a reasonable amount of text, but as soon as this exceeds some limit, it returns BLANK. I've also tried using INDEX/MATCH with same problem. Is there a workaround or alternative function?

For example:

This will work and return the text in cell A2
A2: The quick brown fox jumps over the lazy dog. Orange. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog

This will return BLANK
A2: The quick brown fox jumps over the lazy dog. Orange. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog

View 14 Replies View Related

VLookup Not Working For All The Cells

Mar 26, 2014

Sheet 3 column c is where the formula is located - pulling data from b14master (sheet)

Worksheet attached

View 4 Replies View Related

Vlookup Not Working Properly

Apr 10, 2009

I have problem with vlookup. I am attaching my file.

View 3 Replies View Related

VLookUp Not Working Between 2 Worksheets?

Sep 10, 2013

I have two worksheets and VLookup is not working between the two worksheets. I made sure that type of text is same . COntent is trimmed to avoid any blank spaces. If i put the formula for the same sheet range i get the value but for another worksheet i m getting #NA error.

[CODE][=VLOOKUP(A4,CddInfo_Filtered!A1:E6,5,FALSE)/CODE]

View 2 Replies View Related

Vlookup On Text Fields Not Working

May 12, 2014

I use Vlookup all the time but this is one has be stumped. On the attached spreadsheet I trying to lookup the description on sheet 2 (lookup data) and return it to description on sheet 1 (orig data). I have the both fields formatted as text so I'm not sure why it's not returning the value?

View 5 Replies View Related

Vlookup Inside IF Function Not Working?

Jan 7, 2014

I have the following formula that has ceased to work in excel. I don't think there are any errors in it so I'm unsure as to why the link no longer works. Neither of the files I'm using has moved location on the server.

=IF(H7>0,(I7*H7)+((I7*H7/100)*VLOOKUP(B7,'T:FILEFILEFILE'!$B:$E,4,FALSE))+0.25,0)

I'm not sure if this makes much of a difference but people opening the file use various versions of Microsoft Office.

View 10 Replies View Related

CountBLANK Not Working With Vlookup Function

Jan 27, 2014

I have 3 worksheets for 3 separate managers, each sheet has a column which uses a COUNTBLANK function to work out the number of days off an employee has had off in the last two weeks:

Now the formula works perfectly on each worksheet, however I also have a master worksheet (which is identically set out and formatted to the 3 manager sheets) which uses a vlookup formula to pull the data from all 3 worksheets into one at the beginning of the workbook.

The problem I've come across is that the COUNTBLANK formula doesn't work on the master worksheet - I think this has something to do with the vlookup formula entered into the cells which I consider to be blank, but excel doesn't?

I've tried using a separate vlookup formula to pull the data from the 3 managers worksheets and this does work unless an employee appears on more than one managers' sheet - then the data from both worksheets is added together.....

Is there another function I could use to display the information I need to?

View 1 Replies View Related

Vlookup Formula Is Working On Some Criteria But Not Others

Jul 18, 2009

The vlookup formula is only partly working on the attached sheet, but I cant find an explanation as to why it can look up some criteria but not others.

View 3 Replies View Related

Vlookup Only Working Half Way Down Spreadsheet?

Jan 20, 2009

I have a spreadsheet with members details in and I've added a few columns showing:

Col Q: Paid 2008 (blank if No, 1 if Yes)
Col R: Show Paid Yes or No (shows a Yes or a No)
Col S: Date Joined (only entered if new and joined during 2008)
Col Z: Subs owing from 2008 (if existing members and owe last yr's subs)
Col AA: Subs to Pay in 2009 (a standard £35 or pro rata if joined during 2008)
Col AB: Pro Rata (if they joined other than at the beginning of 2008)
Col AC: EA Sub? (based on a yes/no column, to add £5 if yes)
Col AD: Total to Pay for 2009

So the formulae (or data entered) for the above columns are as follows:

Col Q: Paid 2008 - blank if no, 1 if Yes
Col R: Show Paid Yes or No - =IF(Q2=1,"Yes","No")
Col S: Date Joined - a date entered in format d/m/yy
Col Z: Subs owing from 2008 - =IF(R2="no", 35,0)....I want a default 35 in here
Col AA: Subs to Pay in 2009 - =IF(S2="",35,"Pro Rata")....says that if there is no date which indicates they are an existing member, they will pay the standard 35, otherwise they'll be paying a pro rata fee...................

Problem:
It all works fine until a certain row (27 actually) - then I get a VALUE! error which points to the Date Joined field. Now I've tested that value against the vlookup table and it returns the correct data, so why doesn't it do it in my spreadsheet????? I've tried changing the formats on the cells; clearing all data; entering a different date, but from that row in the spreadsheet down to the last row, it simply won't work! I've looked at each formula in each cell on the rows where it is working and the rows where it isn't and I can't see anything different.

What else can I look for? It is SO frustrating as it does what I need it to to do but only for a third of the spreadsheet!!!!

View 3 Replies View Related

VLookup Only Working For Negative Numbers?

Aug 28, 2013

I have a column of numbers I want to look up, and a column of results to the right I want to spit out.
So I have the vlookup formula in column G, H a copy of that, except it's showing the formula instead of result. Same thing with I and J. So you can see the actual formula.

I've manually found the first two numbers and colored them red and green... but I can't seem to get the formula to work.. As you can see, it's only able to find the negative numbers, but not any of the positive numbers.

I tried to test the cells if they are equal or not, and they seem to be equal!

View 9 Replies View Related

Multiple Checks For IF - VLOOKUP Not Working

Mar 5, 2009

embedding the following
(VLOOKUP(A2,[svdlsa08_2007mast.xls]Sheet1!$A$2:$U$3869,1,FALSE)

in the following statement:

=IF(((VLOOKUP(A2,[svdlsa08_2007mast.xls]Sheet1!$A$2:$U$3869,1,FALSE))-A2=0),(VLOOKUP(C2,[svdlsa08_2007mast.xls]Sheet1!$C$2:$U$3869,17,FALSE)),"No Match")

The IF statement is designed to check a different value in the source spreadsheet against one in the destination sheet which should always match for the desired values, but this doesn't seem to make any difference to what is being returned - I'm still getting the first match instead of the appropriate one.

Is there a better way to force the VLOOKUP to return the value from the correct match and not just the first one?

View 9 Replies View Related

Compare Two Very Large Files - Vlookup Is Not Working?

Jul 24, 2014

I'm trying to compare two very large files to find some that are in one AND also in the other. I'm using =VLOOKUP(C2,Parts2!C:D,1,FALSE) and my results are #N/A for all of them. I have formatted both columns as 'General' because there can be letters and numbers in the serial number, I have also tried formatting as text to no avail. I have confirmed no preceding or trailing spaces or other special characters.

I am however, able to locate values in both documents using Ctrl F. I'm totally puzzled because I've always been able to figure out what's causing my Vlookup issues when I have them but this time I'm not able to.

View 14 Replies View Related

Dragging Down Formula With Vlookup And Iferror Not Working?

Mar 26, 2014

I am trying to get this tricky formula to work with vlookup and if error. The problem is that excel will not recognize the formula when I try to drag it down, but instead repeats the same numbers over again. I've tried some combinations using vlookup, rows, and if error, but it doesn't seem to work. So I'm trying to drag down the formula from g3:g99, to reference either cells b8:99, or whichever value I enter into f1, on down to b99.

View 4 Replies View Related

VLookup Multiple Values In Table - Not Working

Jun 13, 2013

I am trying to use a =vlookup(and( type formula. Excel accepted my syntax, but the formula is not working. Here are the details:

=VLOOKUP(AND(E2,O2),'[SOURCE DATA FOR PROFILES.xlsx]Sheet1'!$B:$G,6,FALSE)

The values from cell E2 and O2 are both present on a row in the SOURCE DATA spreadsheet, and column 6 is the last column in my table (both values appear before column 6, but not next to each other).

The formula returns #N/A. Under those circumstances, shouldn't it return the value of column 6 on the row where those two values are present together?

Do the columns containing the values have to be next to each other in the table for this to work? Does the data type matter (one is a number, the other a street address)? The value to be returned is a number.

View 5 Replies View Related

Aggregate Function On Vlookup Array Not Working

Oct 17, 2009

I am trying to create a single cell formula that returns the min value of an array returned from a vlookup function. This is part of a more complex solution that I am trying to implement, but I think I have narrowed my problem down to this issue, so I have created a very simple example to demonstrate.

Cells A1 to B5 contain a lookup table:

table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}

LetterNumber D4 C3 B2 A1

Cells A7 to C8 contain the input values:

table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}..................

View 9 Replies View Related

Vlookup Formula Not Working With Data On Separate Sheet

Mar 13, 2006

I have a sheet set up with names. I have 2 other sheets with spouses and
children that belong to the first sheet. I want to insert a formula that
will look up the correct spouse (based on a member number) and put in it the
column. Same with the children. I tried the vlookup function, but it did
not return the correct result.

View 14 Replies View Related

VLookup Stopped Working Unless Hit Enter While Cursor Is In Formula Bar

Aug 3, 2012

This vlookup has been in this workbook for years. All of a sudden any of the cells that have formulas won't work without placing the cursor after the formula in the bar and hitting enter.

It is keeping a marco from running correctly.

View 2 Replies View Related

VLookup Formula Is Not Working With General Number Values?

Nov 14, 2012

I have a vlookup formula: =VLOOKUP(TRIM(C101),Sheet2!$A$1:$B$500,(2), FALSE)

It is not working with General number values. Why is this? Is there something I should add?

The formula works if I swap columns to one with text or if I include text in the column.

View 7 Replies View Related

Excel 2013 :: VLookup Stops Working After Certain Number?

Jan 28, 2014

Excel 2013

Our company has a shipping report spreadsheet that has the job number in column A and the ship date in column F. I want to track other things on a separate spreadsheet. So far, we are only down to row 1440 so in order to account for future jobs, my code on the other spreadsheet is:

=VLOOKUP(A2, '[Shipping Report.xlsx]Monthly shipping schedule'!$A$1:$F$5000, 6, FALSE)

Also, the jobs are arranged by ship date, not by number order.

This has worked perfectly for months but for some reason, it will no longer recognize job numbers greater than 1331. The format is the same between the working and non-working cell. Is there a max limit for vlookups that I am not aware of? If this was a sudden failure, I could nail it down but there has to be an underlying reason I'm not seeing.

Here is a sample of my spreadsheet:
Ship Date
1325 12/27/13
1326 3/10/14
1327 1/4/14
1328 1/31/14
1329 3/3/14
1330 1/22/14
1331 1/15/14
1332 #N/A
1333 #N/A
1334 #N/A
1335 #N/A
1336 #N/A
1337 #N/A
1338 #N/A
1339 #N/A
1340 #N/A

View 9 Replies View Related

Multiplying Cost By Variable Factors, Vlookup Not Working

Nov 13, 2008

I have an Excel 2003 situation I cannot resolve. In one workbook, I have a table of multiplication factors based on a numerical general ledger code. On another sheet, I have a data extract including that code and a cost. In the latter sheet, I need to multiply cost by the appropriate factor based on the GL code - IF Code=X, then cost*factor.

Should be simple, but I have too many codes for a nested IF statement. I also tried a VLOOKUP, but since the codes are numerical, Excel interprets them to be in the thousands, while my factors are 1.xxxxxxx, and since the data being looked up thereby appears smaller than the keys, VLOOKUP will only return #N/A or ?NAME, depending on whether I try to nest it in an IF or not. I also have several thousand records per month to which this needs to be applied, so going manual is not an option.

The calculating is done in column E, the original cost is in column AB, the key (GL code) is in column R, and the GL code range with factors is on the !Factors sheet (column A=Code, B=Description, C=factor).

*I'm running Excel 2003 on WinXP Pro

View 9 Replies View Related

Macros That Were Working In Excel 2003 Are Not Working In 2007

Jan 25, 2010

I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.

Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i

View 9 Replies View Related

Working Day Function: (Day + Next 1st Working Day)

Aug 27, 2009

I was looking for a final result as follows

21-Aug-09 + 1 = 24-Aug-09 (Day + next 1st working day)

21-Aug-09 + 3 = 26-Aug-09 (Day + next 3rd working day)

View 2 Replies View Related

VLOOKUP With INDIRECT (become Dynamic As The Table Array Part Of The Vlookup Will Change)

Aug 18, 2009

I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.

So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.

So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73

This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.

View 3 Replies View Related

Hyperlinks And VLookup: VLookup To Find EMail And Web Addresses

Oct 5, 2009

I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?

View 5 Replies View Related

Write VLookup Where Data Array Changes Each Time VLookup Used

Oct 29, 2012

I'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:

Loans to countries
Mar
Apr
May
Jun

Loans to banks
Mar
Apr
May
Jun

Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.

View 4 Replies View Related

Double VLookup (vlookup The Same Data From 2 Different Sheets)

Jul 13, 2009

I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.

View 4 Replies View Related

Vlookup Across Sheets, Nested Vlookup Possibly?

Jun 9, 2009

I’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?

The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.

View 14 Replies View Related

Vlookup Looping (for Each...next?). Vlookup Loop Technique

Jul 24, 2009

I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved