I have two worksheets and VLookup is not working between the two worksheets. I made sure that type of text is same . COntent is trimmed to avoid any blank spaces. If i put the formula for the same sheet range i get the value but for another worksheet i m getting #NA error.

Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?

I have 3 worksheets, 1st is called Rabbit Nov, the 2nd is called Badger Nov and the 3rd is called Tracking.

On the Tracking worksheet I am inputting the average scores taken from the other 2 worksheets.

So for instance on the tracking sheet I have E5=AVERAGE('Rabbit Nov'!E5:E21), then E6=AVERAGE('Rabbit Nov'!E22-37); E7=AVERAGE('Badger Nov'!E5-E18), E8=AVERAGE ('Badger Nov E19-E32)

So there are blocks of 2 Rabbit scores and then a block of 2 Badger scores.

What I want to know is, is there a quicker way of inputting the formulae or do I have to do cell by cell, as obviously automatically it doesn't work for this spreadsheet.

I have a worksheet with with links to other workbooks. This has been working fine but a few days ago stopped working. I am getting a pop-up box.

An example of this is : Opening C:Business300635 Invoice.xlsm.

Some files can contain viruses or otherwise be harmful to your computer. It is important to be certain that this file is from a trustworthy source. Would you like to open this file? Yes or No.

When i click on Yes the busy icon appears for about 2 minutes and then disappears, not opening the file. I have tried to get this solved by going to Microsoft site for any possible clues. no luck there. I have uninstalled all updates to Microsoft and Excel to a point prior to the problem occurring, but to no avail. I can access the workbook I need to open by clicking the Office Button, and then searching for the relevant workbook.

The hyperlink formula I am using is " =HYPERLINK("C:Business"&P546&" Invoice.xlsm", "Invoice") ". The "&P546&" refers to the invoice number listed elsewhere in the worksheet.

I have 3 sheets ("zip", "report", "ches") in a workbook

I want "ches" column A to be filled with data from "report" column D if there is a match of "zip" cell A12 from "report" column S

I keep getting the error "unable to get the Vlookup property of the WorksheetFunction class"

Private Sub Worksheet_Change(ByVal Target As Range)

Dim myRange As Range Dim myRange1 As Range

Set myRange = ActiveWorkbook.Worksheets("report").Range("A1:S65536") Set myRange1 = ActiveWorkbook.Worksheets("ches").Range("a65536").End(xlUp).Offset(1, 0)

myRange1.Value = Application.WorksheetFunction.VLookup(ActiveWorkbook.Worksheets("zip").Range("a12"), myRange, 4) End Sub

I have a vlookup that returns an #N/A error due to the table array originally being formatted as text. The data is simply a two or three digit number.

I have tried everything I can think of to get the table array to equal the lookup value.

I formated cell to number. I tried tab delimated/finish. I tried typing a 1 in a different cell and doing a paste special then multiply. I tried copying to a different worksheet. I just cannot get it to work.

VLOOKUP will only work to a set limit number of text characters in a cell. So I can search for the value "*orange*" if the cells contain a reasonable amount of text, but as soon as this exceeds some limit, it returns BLANK. I've also tried using INDEX/MATCH with same problem. Is there a workaround or alternative function?

For example:

This will work and return the text in cell A2 A2: The quick brown fox jumps over the lazy dog. Orange. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog

This will return BLANK A2: The quick brown fox jumps over the lazy dog. Orange. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog

I'm getting a Run tim error 438 object doesn't support this property or method for the If ws line. All i'm trying to do is copy the A column results starting at A5 from each worksheet listed into the active worksheet starting at A128. hiding any blank cells or cells with errors (I.e. #N/A) would be great as well.

I use Vlookup all the time but this is one has be stumped. On the attached spreadsheet I trying to lookup the description on sheet 2 (lookup data) and return it to description on sheet 1 (orig data). I have the both fields formatted as text so I'm not sure why it's not returning the value?

I have the following formula that has ceased to work in excel. I don't think there are any errors in it so I'm unsure as to why the link no longer works. Neither of the files I'm using has moved location on the server.

I have 3 worksheets for 3 separate managers, each sheet has a column which uses a COUNTBLANK function to work out the number of days off an employee has had off in the last two weeks:

Now the formula works perfectly on each worksheet, however I also have a master worksheet (which is identically set out and formatted to the 3 manager sheets) which uses a vlookup formula to pull the data from all 3 worksheets into one at the beginning of the workbook.

The problem I've come across is that the COUNTBLANK formula doesn't work on the master worksheet - I think this has something to do with the vlookup formula entered into the cells which I consider to be blank, but excel doesn't?

I've tried using a separate vlookup formula to pull the data from the 3 managers worksheets and this does work unless an employee appears on more than one managers' sheet - then the data from both worksheets is added together.....

Is there another function I could use to display the information I need to?

The vlookup formula is only partly working on the attached sheet, but I cant find an explanation as to why it can look up some criteria but not others.

I have a spreadsheet with members details in and I've added a few columns showing:

Col Q: Paid 2008 (blank if No, 1 if Yes) Col R: Show Paid Yes or No (shows a Yes or a No) Col S: Date Joined (only entered if new and joined during 2008) Col Z: Subs owing from 2008 (if existing members and owe last yr's subs) Col AA: Subs to Pay in 2009 (a standard £35 or pro rata if joined during 2008) Col AB: Pro Rata (if they joined other than at the beginning of 2008) Col AC: EA Sub? (based on a yes/no column, to add £5 if yes) Col AD: Total to Pay for 2009

So the formulae (or data entered) for the above columns are as follows:

Col Q: Paid 2008 - blank if no, 1 if Yes Col R: Show Paid Yes or No - =IF(Q2=1,"Yes","No") Col S: Date Joined - a date entered in format d/m/yy Col Z: Subs owing from 2008 - =IF(R2="no", 35,0)....I want a default 35 in here Col AA: Subs to Pay in 2009 - =IF(S2="",35,"Pro Rata")....says that if there is no date which indicates they are an existing member, they will pay the standard 35, otherwise they'll be paying a pro rata fee...................

Problem: It all works fine until a certain row (27 actually) - then I get a VALUE! error which points to the Date Joined field. Now I've tested that value against the vlookup table and it returns the correct data, so why doesn't it do it in my spreadsheet????? I've tried changing the formats on the cells; clearing all data; entering a different date, but from that row in the spreadsheet down to the last row, it simply won't work! I've looked at each formula in each cell on the rows where it is working and the rows where it isn't and I can't see anything different.

What else can I look for? It is SO frustrating as it does what I need it to to do but only for a third of the spreadsheet!!!!

I have a column of numbers I want to look up, and a column of results to the right I want to spit out. So I have the vlookup formula in column G, H a copy of that, except it's showing the formula instead of result. Same thing with I and J. So you can see the actual formula.

I've manually found the first two numbers and colored them red and green... but I can't seem to get the formula to work.. As you can see, it's only able to find the negative numbers, but not any of the positive numbers.

I tried to test the cells if they are equal or not, and they seem to be equal!

The IF statement is designed to check a different value in the source spreadsheet against one in the destination sheet which should always match for the desired values, but this doesn't seem to make any difference to what is being returned - I'm still getting the first match instead of the appropriate one.

Is there a better way to force the VLOOKUP to return the value from the correct match and not just the first one?

I'm trying to compare two very large files to find some that are in one AND also in the other. I'm using =VLOOKUP(C2,Parts2!C:D,1,FALSE) and my results are #N/A for all of them. I have formatted both columns as 'General' because there can be letters and numbers in the serial number, I have also tried formatting as text to no avail. I have confirmed no preceding or trailing spaces or other special characters.

I am however, able to locate values in both documents using Ctrl F. I'm totally puzzled because I've always been able to figure out what's causing my Vlookup issues when I have them but this time I'm not able to.

I am trying to get this tricky formula to work with vlookup and if error. The problem is that excel will not recognize the formula when I try to drag it down, but instead repeats the same numbers over again. I've tried some combinations using vlookup, rows, and if error, but it doesn't seem to work. So I'm trying to drag down the formula from g3:g99, to reference either cells b8:99, or whichever value I enter into f1, on down to b99.

I am trying to use a =vlookup(and( type formula. Excel accepted my syntax, but the formula is not working. Here are the details:

=VLOOKUP(AND(E2,O2),'[SOURCE DATA FOR PROFILES.xlsx]Sheet1'!$B:$G,6,FALSE)

The values from cell E2 and O2 are both present on a row in the SOURCE DATA spreadsheet, and column 6 is the last column in my table (both values appear before column 6, but not next to each other).

The formula returns #N/A. Under those circumstances, shouldn't it return the value of column 6 on the row where those two values are present together?

Do the columns containing the values have to be next to each other in the table for this to work? Does the data type matter (one is a number, the other a street address)? The value to be returned is a number.

I am trying to create a single cell formula that returns the min value of an array returned from a vlookup function. This is part of a more complex solution that I am trying to implement, but I think I have narrowed my problem down to this issue, so I have created a very simple example to demonstrate.

I have a sheet set up with names. I have 2 other sheets with spouses and children that belong to the first sheet. I want to insert a formula that will look up the correct spouse (based on a member number) and put in it the column. Same with the children. I tried the vlookup function, but it did not return the correct result.

This vlookup has been in this workbook for years. All of a sudden any of the cells that have formulas won't work without placing the cursor after the formula in the bar and hitting enter.

Our company has a shipping report spreadsheet that has the job number in column A and the ship date in column F. I want to track other things on a separate spreadsheet. So far, we are only down to row 1440 so in order to account for future jobs, my code on the other spreadsheet is:

Also, the jobs are arranged by ship date, not by number order.

This has worked perfectly for months but for some reason, it will no longer recognize job numbers greater than 1331. The format is the same between the working and non-working cell. Is there a max limit for vlookups that I am not aware of? If this was a sudden failure, I could nail it down but there has to be an underlying reason I'm not seeing.

Here is a sample of my spreadsheet: Ship Date 1325 12/27/13 1326 3/10/14 1327 1/4/14 1328 1/31/14 1329 3/3/14 1330 1/22/14 1331 1/15/14 1332 #N/A 1333 #N/A 1334 #N/A 1335 #N/A 1336 #N/A 1337 #N/A 1338 #N/A 1339 #N/A 1340 #N/A

I have an Excel 2003 situation I cannot resolve. In one workbook, I have a table of multiplication factors based on a numerical general ledger code. On another sheet, I have a data extract including that code and a cost. In the latter sheet, I need to multiply cost by the appropriate factor based on the GL code - IF Code=X, then cost*factor.

Should be simple, but I have too many codes for a nested IF statement. I also tried a VLOOKUP, but since the codes are numerical, Excel interprets them to be in the thousands, while my factors are 1.xxxxxxx, and since the data being looked up thereby appears smaller than the keys, VLOOKUP will only return #N/A or ?NAME, depending on whether I try to nest it in an IF or not. I also have several thousand records per month to which this needs to be applied, so going manual is not an option.

The calculating is done in column E, the original cost is in column AB, the key (GL code) is in column R, and the GL code range with factors is on the !Factors sheet (column A=Code, B=Description, C=factor).

I've being asked to create this awesome new spreadsheet that summaries data from two other spreadsheets. I personally have no idea about excel but have gotten quiet good with the vlookup and isna formulas etc and so far so good. Till i had to search for a value over 12 worksheets. Ive tried Vlookup using an indirect formula using named cells etc i found but i cant work it out and all this reading has turned my brain to mush. So what im trying to do is:

I have a new spreadsheet called summary. What i need to do is pull sales data through from a spread sheet called "Sales Orders_2009". In the spread sheet there is multiple tabs, 12 of which i need to search. The tabs are called SalesJan, SalesFeb etc. On each tab i need to search in the data range B10 to I34. In the Summary spreadsheet i type an invoice number into A2 and that is the lookup value to search for across the 12 worksheets.

I have 300,000 rows of data . . . spread across 7 worksheets. The columns are the same...

The first worksheet is about 3000 lines (of vehicle VINS) . . . I need to be able to scan across all the worksheets looking for. The only thing I might try is the poor man's way of nested if then else with nested lookups. . . .

I have multiple worksheets with data for which I would like to write a macro to search and "retrieve" based on the State/County/Municipality and Client selected. I have created the drop down menus that should drive the data being searched, but I'm not confident in my very limited abilities to take this to the next level.

End goal: User should be able to select from the dependent drop down lists (State/County/Municipality) and/or Client, click "Retrieve Data" button and pull in data from the appropriate worksheet driven by the selection in the drop down lists.

Under the Name colum (B) i want a formula that uses the employee number (A) to look up the name. The problem i am having is that i need to look the name up from 3 other worksheets.

On worksheet 1 i have fridays work and 2 i have saturdays work and 3 sundays!! I only want a name to appear if they worked any one (or more) of these days. If they didn't work i would like the name to remain blank.

On all worksheets employee number and name arein colums A and B. I do have another worksheet that has name and number only in though. worksheet 4!