Vlookup Not Working Properly
Apr 10, 2009I have problem with vlookup. I am attaching my file.
View 3 Replies
ADVERTISEMENT
Sum With Offset Not Working Properly?
May 30, 2013Total amount in Column B should same as shown in Column F
=IF(E3<>"",SUM(OFFSET($C3,ISTEXT(E3),,,1):C3),"")Above formula is calculating always two rows.
Sorting A-Z Not Working Properly
Sep 3, 2013I am including an attached file for reference.
The file is sorted A-Z, but if you scroll down towards the bottom, you will see that some values are out of order. Both instances of University of Central Florida and University of North Dakota are out of place.
University of Central Florida should be between University of California and University of Colorado.
University of North Dakota should be between University of Colorado and University of Southern Mississippi.
Chdir Not Working Properly
Feb 5, 2009I have a really strange problem i have two different hard directories o: & u:
i have the following code linked to a command button
chdir "U: foldername foldername foldername"
saveactiveworkbook.saveas range("c9")
Selection Not Working Properly
May 25, 2006I try the following selection
Columns("B:AF").Select
Selection.ColumnWidth = 2.3
It is selecting columns a to af. Why would take column a if it is not part of select?
Sub Add_worksheet_month()
Dim Lst() As String
Dim I As Integer
Dim wname As Date
'Dim wmonth As Date
Calculating Formula Not Working Properly
Nov 15, 2008I am trying to work out an excel workbook for calculating family recipes. I have gotten most of it figured out but am having a problem with one thing. When the serving size of an item is 8 oz & the recipe calls for 14.5 oz the only way I can get it to work properly is to enter 1.75 in the serving size.
But I would like (actually need) to be able to enter the 14.5 and have it calculate the calories correctly - since sometimes the amount to be added to the recipe may be 15 ounces and the serving size is 8 ounces etc....
Rank Formula Not Working Properly
Oct 7, 2009I have a rank formula that is seemingly erroring out on certain cells - indiscriminately. I have tried and tried to figure this out for myself but this is beyond my knowledge.
Only on some cells is the rank not working and returning a "-" (the error result).
I want the rank to use absolute numbers, so that it will rank according to variance or percentage (regardless of +/-). I am also using another cell (R1) to tell the rank what column to use.
As you can see there are a few entries, both + & -, that are not being included in the rank - for reasons beyond me.
Ranking Formula Not Working Properly
Oct 25, 2009I have 6 categories that need to be ranked 1-6 in order of highest number of occurances. My ranking formula is showing 1-7, missing number 3. I have attached a sample worksheet further showing what I am trying to explain. I need cell A3 to show a ranking of "3". Currently it shows "4". What am I doing wrong??
View 4 Replies View RelatedMSForms.CommandButton Not Working Properly
Jan 29, 2009I have a form with 2 buttons and a frame. Inside the frame I have another button. I get a Type Error Message when I run the code and I don't understand why.
View 3 Replies View RelatedExit Sub Property Is Not Working Properly!!
Jun 22, 2009I have the following two codes on a userform, The first code performs two steps:
The first step is running the second code (MyDate), which is used for checking the entries in the userform textboxes and if there is any wrong entry a message box appears then it exits sub.
However, what happens when it finds any wrong entry is that it displays the msgbox and instead of exiting sub as it is requested in the (MyDate) code, it resumes running and moves to the second step and adds 1 to ComboBox1 ListIndex.
Find Statement Not Working Properly
Apr 2, 2007I am in the process of converting my programs over so as not to use these and I am already seeing a drastic difference in speed.
I have run into a problem that I need help with. I have a spreadsheet similar to the example below. The first column contains a list of college majors and after each major is a row of classes that are required by that major.
A25346 ENG101 MAT115 PSY150
A35678 ENG111 MAT115 SOC101
A23456 ENG101 MAT116 HIS201
The first thing I need to do is search down the first column for the major. Once the major is found I need to search across the row for the class. I am having trouble searching across a single row for the class.
Here is the section of code where I experience the problem
Set rMajor = wsMajor.Cells.Find(What:=Major, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False)
If Not rMajor Is Nothing Then
majorrow = rMajor.Cells.Offset(0, 1).Value............
Cells Range Reference Not Working Properly
May 25, 2009I often have problems with the cells range reference method. For some reason I get an error and can't tell why. Other times it works fine. Is this just an unstable method to use or is this completely wrong? I'm assuming I am using the wrong syntax. It is definetly the range reference causing the problem.
Dim cnt1 as integer, cnt2 as integer,cnt3 as integer
cnt1 = 2
cnt2 = 50
cnt3 = 2
dim myrange as range
set myrange = sheets("sheet1").range(cells(2,cnt1), cells(cnt2,cnt3))
I have no idea why it won't work. I'm basically searching a columner range of cells.
VBA - Insert And Rename Columns Not Working Properly
Feb 21, 2013The code below is supposed to insert a column and rename it. However, when I debug, the code only renames the column, it does split or run the loop. I press debug again, and then code executes as it is intended.
I can't explain why I have to press debug twice for in order for the code to work properly.
Code:
Sub renameColumns()
With Sheets("byPosition")
Columns("E:E").Select
Selection.Insert Shift:=xlToRight
.Range("E1").Value = "Exemption"
.Cells.EntireColumn.AutoFit
[Code] .......
Format Painter & Paste Not Working Properly
Jul 13, 2006I've been working on a particular spreadsheet and I've just noticed that
double clicking the format painter will only format one cell. It won't
retain the format to be put into the next selected cell which it should when
its double clicked. The same goes for copy and paste. Normally once you've
copied something you can paste it into a number of cells individually, one
after the other, but after the first paste selection, the paste option is no
longer available. I can't see any settings under options to fix this. What has happened, and how do I fix it? (I'm using Excel 2003 SP1 - is there a SP2?)
Using Autofilter And Multiple Criteria - Array Is Not Working Properly
Oct 12, 2012I thought I had been able to use array to have more than two criterias with Autofilter, but now I am unable to make the following code work. What I am trying to do is have all the records that does not contain either N/A, S/O or xx and also have a filter on column 125 for the value "OUI".
VB:
Sub test()
Set ws1 = ThisWorkbook.Sheets("SOMMAIRE_EN_ALL")
Set ws2 = Workbooks("Fichier_central_2013_anglais_2_CLEAN").Sheets("DETAIL_CONCAT")
Set r = ws2.Range("A1:du4783")
[Code] .....
Macro Not Working Properly For Conversion Of Date Format?
Apr 13, 2014In the attached sheet, one macro is developed which is not working properly. My req is to convert date from dd-mon-yyyy to yyyy/mm/dd format. (23-jan-2010--> 2010/01/23)
If incomplete date is there, then hyphen should place the gap i.e.
For date like APR-2014------> Output should be 2014/04/--
For date like 1998 -----> Output should be 1998/--/--
The below macro works only for row number 11, 15 and 16.
[Code]....
Attached File : date.xlsm‎
Ensure Value Entered Into Textbox - Validation Not Working Properly
Jul 1, 2014I'm using the following code to try to ensure a value is entered into a text box, but when I click over to the next text box skipping the first one entirely, I don't receive any message indicating the previous box is empty. I'm trying to make it so certain fields are required and others are optional. Here's the code I'm currently using:
[Code] .....
First Key Sort Order Not Working Properly In Pivot Table
Jul 23, 2012I have entered a custom sort order under 'first key sort order,' but the field is not sorting according to the list.
I'm sure I entered the list correctly, because I actually entered it a long time ago, and it was working for a while. However, today the underlying data was temporarily erased, and the pivot table, when refreshed, basically went blank. I restored the data and refreshed the table, but this field is back to sorting in the wrong order. Refreshing the pivot table and re-choosing the appropriate sort options do not work.
Excel 2010 :: Dynamic Range Not Working Properly
Jan 8, 2013Had been using this formula for almost 3 years, recently the formula didn't work properly as the range goes down halfway only instead of to the last data in the column. I'm using Excel 2010 now.
=Sheet1!$A$2:INDEX(Sheet1!$A:$A,COUNTA(Sheet1!$A:$A))
Get Vlookup In Vba Working
Apr 11, 2007I have 3 sheets ("zip", "report", "ches") in a workbook
I want "ches" column A to be filled with data from "report" column D if there is a match of "zip" cell A12 from "report" column S
I keep getting the error
"unable to get the Vlookup property of the WorksheetFunction class"
Private Sub Worksheet_Change(ByVal Target As Range)
Dim myRange As Range
Dim myRange1 As Range
Set myRange = ActiveWorkbook.Worksheets("report").Range("A1:S65536")
Set myRange1 = ActiveWorkbook.Worksheets("ches").Range("a65536").End(xlUp).Offset(1, 0)
myRange1.Value = Application.WorksheetFunction.VLookup(ActiveWorkbook.Worksheets("zip").Range("a12"), myRange, 4)
End Sub
Vlookup Not Working
May 7, 2009I have a vlookup that returns an #N/A error due to the table array originally being formatted as text. The data is simply a two or three digit number.
I have tried everything I can think of to get the table array to equal the lookup value.
I formated cell to number. I tried tab delimated/finish. I tried typing a 1 in a different cell and doing a paste special then multiply. I tried copying to a different worksheet. I just cannot get it to work.
VLOOKUP Not Working Because Of Too Much Text
May 14, 2014VLOOKUP will only work to a set limit number of text characters in a cell. So I can search for the value "*orange*" if the cells contain a reasonable amount of text, but as soon as this exceeds some limit, it returns BLANK. I've also tried using INDEX/MATCH with same problem. Is there a workaround or alternative function?
For example:
This will work and return the text in cell A2
A2: The quick brown fox jumps over the lazy dog. Orange. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog
This will return BLANK
A2: The quick brown fox jumps over the lazy dog. Orange. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog. The quick brown fox jumps over the lazy dog
VLookup Not Working For All The Cells
Mar 26, 2014Sheet 3 column c is where the formula is located - pulling data from b14master (sheet)
Worksheet attached
VLookUp Not Working Between 2 Worksheets?
Sep 10, 2013I have two worksheets and VLookup is not working between the two worksheets. I made sure that type of text is same . COntent is trimmed to avoid any blank spaces. If i put the formula for the same sheet range i get the value but for another worksheet i m getting #NA error.
[CODE][=VLOOKUP(A4,CddInfo_Filtered!A1:E6,5,FALSE)/CODE]
Vlookup On Text Fields Not Working
May 12, 2014I use Vlookup all the time but this is one has be stumped. On the attached spreadsheet I trying to lookup the description on sheet 2 (lookup data) and return it to description on sheet 1 (orig data). I have the both fields formatted as text so I'm not sure why it's not returning the value?
View 5 Replies View RelatedVlookup Inside IF Function Not Working?
Jan 7, 2014I have the following formula that has ceased to work in excel. I don't think there are any errors in it so I'm unsure as to why the link no longer works. Neither of the files I'm using has moved location on the server.
=IF(H7>0,(I7*H7)+((I7*H7/100)*VLOOKUP(B7,'T:FILEFILEFILE'!$B:$E,4,FALSE))+0.25,0)
I'm not sure if this makes much of a difference but people opening the file use various versions of Microsoft Office.
CountBLANK Not Working With Vlookup Function
Jan 27, 2014I have 3 worksheets for 3 separate managers, each sheet has a column which uses a COUNTBLANK function to work out the number of days off an employee has had off in the last two weeks:
Now the formula works perfectly on each worksheet, however I also have a master worksheet (which is identically set out and formatted to the 3 manager sheets) which uses a vlookup formula to pull the data from all 3 worksheets into one at the beginning of the workbook.
The problem I've come across is that the COUNTBLANK formula doesn't work on the master worksheet - I think this has something to do with the vlookup formula entered into the cells which I consider to be blank, but excel doesn't?
I've tried using a separate vlookup formula to pull the data from the 3 managers worksheets and this does work unless an employee appears on more than one managers' sheet - then the data from both worksheets is added together.....
Is there another function I could use to display the information I need to?
Vlookup Formula Is Working On Some Criteria But Not Others
Jul 18, 2009The vlookup formula is only partly working on the attached sheet, but I cant find an explanation as to why it can look up some criteria but not others.
View 3 Replies View RelatedVlookup Only Working Half Way Down Spreadsheet?
Jan 20, 2009I have a spreadsheet with members details in and I've added a few columns showing:
Col Q: Paid 2008 (blank if No, 1 if Yes)
Col R: Show Paid Yes or No (shows a Yes or a No)
Col S: Date Joined (only entered if new and joined during 2008)
Col Z: Subs owing from 2008 (if existing members and owe last yr's subs)
Col AA: Subs to Pay in 2009 (a standard £35 or pro rata if joined during 2008)
Col AB: Pro Rata (if they joined other than at the beginning of 2008)
Col AC: EA Sub? (based on a yes/no column, to add £5 if yes)
Col AD: Total to Pay for 2009
So the formulae (or data entered) for the above columns are as follows:
Col Q: Paid 2008 - blank if no, 1 if Yes
Col R: Show Paid Yes or No - =IF(Q2=1,"Yes","No")
Col S: Date Joined - a date entered in format d/m/yy
Col Z: Subs owing from 2008 - =IF(R2="no", 35,0)....I want a default 35 in here
Col AA: Subs to Pay in 2009 - =IF(S2="",35,"Pro Rata")....says that if there is no date which indicates they are an existing member, they will pay the standard 35, otherwise they'll be paying a pro rata fee...................
Problem:
It all works fine until a certain row (27 actually) - then I get a VALUE! error which points to the Date Joined field. Now I've tested that value against the vlookup table and it returns the correct data, so why doesn't it do it in my spreadsheet????? I've tried changing the formats on the cells; clearing all data; entering a different date, but from that row in the spreadsheet down to the last row, it simply won't work! I've looked at each formula in each cell on the rows where it is working and the rows where it isn't and I can't see anything different.
What else can I look for? It is SO frustrating as it does what I need it to to do but only for a third of the spreadsheet!!!!
VLookup Only Working For Negative Numbers?
Aug 28, 2013I have a column of numbers I want to look up, and a column of results to the right I want to spit out.
So I have the vlookup formula in column G, H a copy of that, except it's showing the formula instead of result. Same thing with I and J. So you can see the actual formula.
I've manually found the first two numbers and colored them red and green... but I can't seem to get the formula to work.. As you can see, it's only able to find the negative numbers, but not any of the positive numbers.
I tried to test the cells if they are equal or not, and they seem to be equal!
