Need a way to get/calculate ALL of the days of the months from a date range entered into an inputbox in which a user may enter any day of a month? In other words, the user enters 9/14/2009 in the first inputbox then 10/8/2012 in the second and code would calculate the number of days as 9/1/2009 - 10/31/2012.
Here is the current code I'm using that calculates only the exact days:
I would like to create a monthly inventory, based on workdays (Monday - Friday)Myrna Larson has a formula that I would like to use with the workday function, but I don't know how to combine them.
=IF(A1="",A1,IF(MONTH(A1+1)=MONTH(A1),A1+1,""))+ = workday
to fit on the page, I need the dates to be from the 1st to the 15th, and 16th to the 31st. I am not sure how to write this either.
function in a spreadsheet that will list all of the days in
a given month automaticaly with the entry of the 1st of the month only.
Ex;
10/01/05 entered dated
10/02/05 auto fill
10/03/05 "
. "
. "
10/31/05 end of auto fill
I would like the function to stop filling dates at end of the month even for shorted months such as Feb.
I am writing a module which have a different test based on for each of the previous 2 column cells. It calculate the days passed or in simple way calculate the date difference for the 2 columns and puts them in third. But i need to use a inputbox for entering the first date for monday of the month each time i use the worksheet.
When i try using the module for each cell of the column it display the input box for each cell. is there any way so that i just enter the value in input box and it can be used in rest of the module.Without using it again and again.
I wanted to determine the number of days between two dates. Specifically, if the initial date is in one month, and the second is in a different month and an output would result a number of days in each month until the final date. BUT I have a large amount of data to do this for in a list view, way to put a formula in excel and just drag down the entire list to get the required information. see below for an example.
The result I'm looking for is the separate the months and only show the relevant months between the two dates in one cell or the adjacent. Something similar to the table outlined below.
Input Data
Result
Start Date
[Code]....
I want to convert Months into days
E.g. - in my Data F2 = Oct.13 and I want 31 days in F3.
I need to calculate the number of days chargeable in a given month for a tenancy as follows:
eg Current Month 30 Sep 2008
Begin End No of Days in Month
Tenancy 1 01 Jul 2008 31 Jul 08
Tenancy 2 01 Jul 2008 24 Sep 08
Tenancy 1 01 Jul 2008 31 Oct 08
Tenancy 1 01 Sep 2008 30 Sep 08
Tenancy 1 01 Sep 2008 31 Oct 08
Tenancy 1 01 Oct 2008 31 Dec 08
I have is a start rent date and an end rent date. They want to break down how many days in each month the item was on rent so they have a column for each month. For example say an item was rented on 12/14/08 and returned on 1/12/09. It was rented for a total of 30days 18 days in December and 12 days in January. So I would need a function in each column that would return a 14 in the December Column and a 12 in the January Column. there are over 350 rows and they are doing the process manually right now and taking several days.
Also I just noticed that the date range is currently entered as a text in the format 2008-12-14 so YYYY-MM-DD. Don't know if the text will be a problem.
Just attached an expample. In it I am trying to find a function to fill in the green cells.
I have 5 columns: Employee Name, Start Date, Probation Time, Probation Ends, Benefits Start.
I want the Benefits Start column to populate the name of the month that follows the Probation Ends date.
For example Employee A starts on March 16. Probation time is 90 days. Probation Ends is 6/14/09. The Benefits start date is 7/1/09, however I want this column to just say July.
I am having trouble creating a formula to capture the "first of the month after 60 days" from the Hire Date.
Example, Hire Date is 01/15/2013, should return 04/01/2013. Would the ROUNDUP function be useful here?
I need to count how many in a month per day X number is =. I originally used Countif -
=COUNTIF(B3,">25252525=36")+COUNTIF(V3,">=36")+COUNTIF(X3,">=36")+COUNTIF(Z3,">=36")
The formula above works, but i end up with several long strings of Countif. I'd like to know if there is a way wherein i can use a shorter formula.
Is there any simple formula to get no. of days in a month?
View 9 Replies View RelatedIm trying to use the equivilent of: =DAY(DATE(YEAR(H5),MONTH(H5)+1,0)) in vba. but i am having trouble with the use proper parenthesis.
basically the above will work in an excel workbook and return the number of days in a month. thats all i really need. so if there is an easier way, which im sure there is, then im up for it...
I am using the following array to determine the total dollar of contracts reviewed in one month.
=SUMPRODUCT(($C$5:$C$3002>$H18)*($C$5:$C$3002<$I18)*(D$5:D$3002))
Column C has the actual Date
Column H the beginning of the month
Column I the end of the month and
Column D the dollar amount
Now I would like to count the number of contracts that fall in the following categories in a given month. The minimum number is in Column N and the maximum in Column O.
1-499,999
500,000-2,499,999
2,500,000-4,999,999
5,000,000-12,499,999
12,500,000-24,999,999
25,000,000-64,999,999
65,000,000+
I can get the count for each category but am having difficulty with the count in the specific month. Does any one have any suggestions - other than a pivot table?
I am attaching a small sample.
I have the inputbox so i can set a string value,
When the inputbox Cancle button is pressed i want to exit sub,
If the inputbox value is nothink and ok button, I want the msgbox displayed then goto newname.
If the inputbox has a value do >>>>>>That>>>>>
I am looking for a formula that will tell me how many days in each month for which a given time span is active. For example the time span 1/1/2014-2/28/14. I want to know the time span is active for 31 days in January and 28 days in February. Another example: time span of 1/15/2014-2/28/2014. I want to know that the time span would be active for 16 days in January and 28 days in February. I am looking for a formula that will capture the amount of days in each month for which the time span covers. as I only know how to write a formula with multiple if statements that require a different formula for each given month, rather than one formula that applies to all months.
View 6 Replies View RelatedI am facing problem in "Month & days" formula
In my current salary sheet "Days fill auto according to given months" from 1-31 as you can see in my attached salary sheet
Salary.xls
the Big problem is i want my salary sheet give dates from 23-22 for example if i select "January" sheet should display date from "Jan-Feb" starting from 23rd Jan to 22 Feb only.... and if I select February than sheet should display date from 23rd Feb to 22 March.... and so on
and if there any blank cell left in the dates area it will highlight it with RED auto as u can see in attached sheet.
I receive an extract from our Financial System monthly which list all the balances for each date of the month (both workings day and week-end(Sat. and Sun.)).
I would like to create a macro which will extract only working date (Mon.- Fri) and the balances in the columns.
Having a problem trying to figure out how to create a auto list of days of the month.
Currently I have an input cell with the format mmmm/yy
I then have a list using Weekdays($A$1)... +1....+2.... etc etc
While this works for this current month ( novemeber ) as soon as I chnage the input cell to decemember the list messes up.
The list is in the format of ddd dd
How do i count no of days in a month; excluding saturday & sunday.
View 14 Replies View RelatedI'm have problems workdays in a month. I have highlighted errors in red.
Sheet1
ABCDEF1JoinedPosition EndJan-12Feb-12Mar-12Apr-12213/06/1101/01/1222212221331/01/1122/03/1322212221419 ...
I currently am trying to refine some spreadsheets at work (hospital setting). The type of files im working with are medication sheets where on the left it states the medication and to the right of it, the cells have the days of the month(1-31) but I need them to change depending on the day they come into our facility. Above the numbers i would also like it to say the day of week with the first initial (M, T, W, T, F, S, S) in the cells are the top. It is something that we have to make for each day it it gets really annoying and is a waste of time moving the dates over for every day. find a way where I can open the file and the numbers and letters are all in the right place without having to change it for the day that the patients are coming in.
View 3 Replies View Relatedthe total consecutive days at the end of the month that a particular person appears?
Here's the sample:
April 1: A
April 1: B
April 1: C
April 2: A
April 2: D
April 2: E
April 3: A
April 3: C
April 3: E
Based on the sample above, the result should be 5 (as A=3 and E=2).
I have checked searching the forums for this but nothing that really matches what I am looking for. I am trying to, from a date, deduce how many days there are in that month. I have tried a solution where I look at EOMONTH adding and subtracting but this is quite cumbersome. Is there some code out there where someone has solved this?
View 9 Replies View RelatedI have some data & want to count the individual number of days for each month.
Example attached..
I have to do a calculation that uses the number of days of the previous month. Thought this would work but it doesn't.
[Code].....
I have a drop down list in cell F1 with all the months. In G1, I would like it to automatically display the number of days in the selected month. Of course it depends on the current year (due to leap year, etc).
View 14 Replies View RelatedI have a list of months in column A and would like a formula in column B that calculates the number of calendar days for each month (i.e. Jan=31, Feb=28 etc.)
View 9 Replies View RelatedI have using the following Formula: =COUNTA(A3:A7,A10:A14,A17:A21,A24:A28,A31:A35)
Basically is counts how many week days there are in a particular month. Now I have a cell (B47) that counts how many Bank Holidays are in that month. I am having trouble using the formula then minus B47. I must be missing something really simple.
Can Anybody help me with a function that will arange all days from January acorrdingly with the year 2010. I am attacing a sample file to make it clear. I need the function to Check which month is in Cell H1 and arrange the days accordingly to the month and the year.
In my example the code must change the Cell values Like this: ...