Go To Named Range Chosen From Combo Box
Sep 16, 2007
I've got a Combo Box that I want to be able to attribute Hyperlinks to. I would like to be able to select one of the options from the Combo Box and have the Hyperlink fire automatically. The conditions are:
Workbook Name: Floor Plan
Combo Box Worksheet Name: Switched 2
Input range: 'Combo Box'!$A$1:$A$4
Cell link: $CU$80
Drop down lines with corresponding Hyperlink Named ranges:
R FRONT R_FRONT_Hardwired
L REAR Audio_1_AZ80
120V-60HZ 4A ER_16_PC_100A_Outlet_6
R REAR Audio_1_AZ80
I've attached the Code as text.It is not working and I'm sure there are a number of reasons why.
View 2 Replies
ADVERTISEMENT
Feb 21, 2009
I am a trainee dermatologist. We undertake allergy patch tests. There is a long list of different patch tests which are selected based on the patients history. I have put each of the types of patch testing on a master sheet. What I would like to be able to do is to have a control button next to each set, and when clicked would add that particular set to a "new patient" worksheet tab. And with every set having its own button, more than one set could be added to a new sheet. In the new patient worksheet id like the sets added with a single row gap between them.
I had tried, and managed to get a single series to work, but then it wouldnt allow me to add the next set, saying that sheet already exists. Ideally finally, id like there to be some way, or message to make sure after printing the new patient worksheet gets deleted.
I hope that all makes sense ! Even if I had a code for a single button that added to a master sheet at the next available row +1 I think I could manipulate the code to suit.
View 9 Replies
View Related
May 29, 2006
I have been trying to make a combobox for which the list is a named range. However, this range needs to be transposed. ListFillRange doesn't seem to let me transpose the list first. I've tried transposing the list somewhere else first and then adding it, but it seems to want a range as opposed to a reference to a range. I'm so confused now. This is the basic code that I wish would work.
ActiveSheet. OLEObjects.Add(ClassType:="Forms.ComboBox.1", Link:=False, _
DisplayAsIcon:=False, Left:=253, Top:=472, Width:=117, Height:=20). _
Select
Selection.ListFillRange = "=transpose(Stream_Data!StreamList)"
While I'm at it, could someone explain to be how to refer to a combobox. ie. when you create it, you don't name it so how can you refer to it. That's why I have used the selection tool above to add the list.
View 3 Replies
View Related
Dec 5, 2007
I'm creating a sheet that takes three Validation Lists into account. The first two lists are based on named regions. The third list uses the first two lists to narrow a search down so that the user can pick what they want from a smaller selection. I'm using the code from Contextures.com to allow the user to double click the validation list to pop up a Combo Box. This allows me to show more than 8 selections at a time and also gives a little freedom on font and font size.
http://www.contextures.com/xlDataVal11.html
Since the third list is not based on a named region but rather code to compare the two previous lists, when I double click the third validation list a blank combo box pops up. it possible to pop up what ever lists are in the validation boxes.
This is the code that I have in the third validation box which States "The Source Currently evaluates to an error" but works fine for some reason. =OFFSET(CategoryStart, MATCH(B4, CategoryColumn, 0) - 1, IF(A4 = "Description", 2, IF(A4 = "ExtDescription", 3, IF(A4 = "PartNumber",4))), COUNTIF(CategoryColumn,B4), 1)
I tried making a named region that was based on the code, so that the list could change as the user selected different options from the first two lists. This gave me the same problems as I had before.
View 2 Replies
View Related
May 27, 2008
I have a workbook with 4 sheets. I created a combo box in the first sheet which I named "Main". The items in the combo box are John, Mary and Peter. The other 3 sheets are named: John, Mary and Peter. What is the right code so that when I select a name from the combo box, say John, it will bring me to the sheet named "John".
View 7 Replies
View Related
Aug 16, 2014
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
View 5 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
Jul 19, 2013
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
View 2 Replies
View Related
Oct 28, 2006
I need to go to named cells in a workbook based on a selection in a combobox - I just can't seem to work out the coding -
View 4 Replies
View Related
Oct 25, 2009
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies
View Related
Mar 14, 2013
Merge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
View 3 Replies
View Related
Oct 20, 2007
i write a micro. Just transfer the array into the excel table, but i do not know to do it. The question is that: Once the array has been filled,ask the user for a location to output it. when this has been obtained and verified then output the table. Provide the row and colomn headings and a suitable title fot the table.
so, ask the user for a location to output, what code can be used. if use
set range=application.inutbox(prompt,,,,,8), the user can choose the range, but how transfer the array into the choosed range? and the range choosed is not equal to the array, how to slow it?
View 3 Replies
View Related
Nov 6, 2006
I have a list of country names in a listbox that are populated using another worksheet that has these country names. When I make a selection in the listbox, I want the same country names to be highlighted in the worksheet. I will then be able to run a macro that takes those selected cells as input.
View 3 Replies
View Related
Mar 2, 2008
I want to do is to use a listbox userform control to navigate between sheets. Each listbox item is the name of a location, which can be dynamically created/added (by other means). Clicking the listbox item activates the corresponding sheet.
however, depending on the user-mode of the application, if the user navigates to another location, then they must return to the location from which they navigated. here's an example to make it clearer
0) user form initializes, populates Listbox = ( Loc1, Loc2, **Loc3** ) {asterix means 'selected/highlighted'}
1) user clicks 'Loc1': sheet for loc1 is activated; repopulate Listbox= (Loc3) {as must go back to from where user came}
2) user clicks 'Loc3' to return to last location: sheet for loc3 is activated; repopulate Listbox = (Loc1, Loc2, **Loc3**)
i have gotten it all working fine, except that for some reason in Step #2 (the return to initial sheet & items) neither.......
View 2 Replies
View Related
Sep 27, 2007
I want to set range a entire column,the rows are dynamic and i want to do it on all the columns in the sheet, my problem is that after i set the range(i hope i did good) i want to do a average of the range and to put the result in a new sheet on a row. I'm sorry for the mess in the code its one of my first macros
Option Explicit
Sub Average()
Dim R As Integer
Dim help As String
Dim Range1 As Range
Dim E As Integer
Dim Avg As Integer
R = 1
'/////CREATE NEW SHEET AND COPY THE FIRST TWO ROWS TO THE NEW ONE
Sheets("UXP data").Select
'Sheets.Add
Sheets("UXP data").Select......................
View 2 Replies
View Related
Oct 16, 2007
I am trying to find a way to create a macro that will take the data selected from the combo box and concatenate it with the data found in cells.
For Example:
Combo Box Selection - "Test"
ID (Column A) - Before
12345
98765
99999
55555
empty cell
23232
ID (Column A) - After
12345 Test
98765 Test
99999 Test
55555 Test
empty cell
23232
View 9 Replies
View Related
May 4, 2008
I'd like to know if it is possible to run a macro in a workbook that will open another workbook (of the users choice) extract data from it, such as columns from its sheets then paste that data into the workbook the macro is running from. The file to be opened will change, so i've found some code that enables the user to select the file to open then open it.
Dim strFile As String
strFile = Application. GetOpenFilename
If strFile <> "False" Then Workbooks.Open strFile
This brings up the standard windows choose file to open box, then opens the selected file. Am I correct in thinking that the Dim here will store the file name I select in the open file box? If so, I'd like to know how to select the workbook using the dim so I can manipulate it from the workbook I'm running the macro in. Incidentally, once the the data has been copied, I'd like the workbook opened with the macro to be closed.
View 5 Replies
View Related
Mar 21, 2009
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
View 9 Replies
View Related
May 23, 2009
I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
View 2 Replies
View Related
Sep 4, 2007
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
View 8 Replies
View Related
Sep 19, 2009
I want to make a combo box in excel that, if i select it the sheet inside the combo box will appear.
Example:
Inside of combox are: Sheet1
Sheet2
Sheet3
If i click combo box and i choose sheet3 the sheet3 will appear.
How can i do this? theirs a macro code to use?
View 9 Replies
View Related
Jul 22, 2008
If I had a combo box that look at 10 item in a range A1:A10 and the output value was in B1
Say a user added a new Item in A11. How could I get the range of the combo box to automatically extend to A11 or A12 if two new items are added.
I am trying to avoid having the input range as A:A and having lots of empty values?
View 9 Replies
View Related
Aug 16, 2009
Is there a way of setting the input range on a combo box to a vale set in a cell?
ie, if my current input range is A2:A40 and i then users add another 20 records to that column, i need the combo box input range to change to A2:A60, so I can leave the sheet unmonitored for the users to add lines and not have to manually change the input range of the combo box.
View 9 Replies
View Related
Mar 31, 2008
I have various charts others view and require the data range to change in 12 month intervals, ie Jan07 -Jan08, Feb07-Feb08. I currently move the ranges manually every month but find the it would be more interactive for others if a drop down combo box on the chart were used enabling the user to choose which intervals to view.
View 5 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Oct 9, 2008
The first combo box is on a userform so that a subject can be selected
View 3 Replies
View Related
Sep 30, 2012
I am preparing a template for which I need a combo box. Becaue it is a template I can't have this combo box any specific input range. Because I won't know how long the data column (that wiill be used for input range) will be.
Also the data column will have many duplicates but the combo box needs to show uniques only.
View 1 Replies
View Related
Mar 25, 2007
I could need a code for a Combo Box to selects the range in Column A. The range includes all non-blank cells.
View 9 Replies
View Related
Apr 3, 2009
I've built the code for a Template form for data entry of a survey. Through Control Toolbox I've created the form and used several textboxes, option buttons, checkboxes and COMBO boxes this one in turn being my trouble.
- Sheet one is called "Data" (this is the place where all inserted information is going to be stored
- Sheet two: "Variables" (here is where I keep the required values for the como boxes - inserted manually apriorely...
Question: What is the code to assing to the combo boxes in order to have the values from the sheet "Variables" of the range A1:A4 - use the comboboxq2 for referee, I'll do the others
P.S. see the code up to now:
Private Sub CommandButtonN_Click()
Dim eRow As Long
Dim ws As Worksheet
Dim inf As WorksheetFunction
Set ws = Worksheets("Data")
Set ws = Worksheets("Variables")
' Find first empty row in database survey
eRow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row ................
View 9 Replies
View Related
