I am trying to find a way to create a macro that will take the data selected from the combo box and concatenate it with the data found in cells.
For Example:
Combo Box Selection - "Test"
ID (Column A) - Before
12345
98765
99999
55555
empty cell
23232
ID (Column A) - After
12345 Test
98765 Test
99999 Test
55555 Test
empty cell
23232
I need to go to named cells in a workbook based on a selection in a combobox - I just can't seem to work out the coding -
View 4 Replies View RelatedI have a column with numbers in each cell. I need to add the same three letters before each of the numbers. Example:
number in cell: 25067 I need it: ABC25067
I did a macro for it but had to do each one individually. I imagine there is a simple formula to do this automatically but I don't know enough to figure it out (despite reading up on it for the last hour!)
I am trying to append data in let's say column A:A with the variable text in J:J. The data in column A:A will look like this /dir/dir/dir/<from this point is where I need the data appended>.
View 4 Replies View Relatedi know this is easy but i don't have an idea how to do it. I have dates written on column A1:A7 like
29-Mar-09
30-Mar-09
31-Mar-09
1-Apr-09
2-Apr-09
3-Apr-09
4-Apr-09
what I would like to do is how can I combine 29-Mar-09 and 4-Apr-09 into one cell...I would like the output to be placed in cell A8 appear as "29-Mar-09 to 4-Apr-09".
I am trying to join text in two different cells using concatenate function / & operator In the combined cell I want the text from second cell to appear in Bold while the text from first cell should continue to remain in normal font. Is there any way i could achieve this?
View 4 Replies View RelatedI've created drop down box using VBA code. Data for drop down box is on the Sheet2 and drop down box created on Sheet1. Need code I have to use to copy selected value from box to any cell on Sheet1 (i.e. Sheet1.A5). Here is my
Private Sub Workbook_Open()
CreateMyBox
End Sub
Sub CreateMyBox()
Dim MyBox As Excel.Shape
With ActiveSheet
Set MyBox = .Shapes.AddFormControl(xlDropDown, 5, 17, 175, 15)
End With
With MyBox
.Name = "MyBox"
.Fill.ForeColor.RGB = RGB(255, 0, 0)..................
I am trying to find a formula that references a cell on a spreadsheet (H7) which is really a Combo Box that is located on a range of cells K25:K30. I want to put a formula in H18, but of course, the combo box always references the range on K. i have tried the $K$25:K430, but i don't know what i am doing. The drop down menu and everything works fine, but the data IS stored elsewhere. HOW do i tell Excel to look at K25:K30,(depending on choice within combo) and then ad H8:H19? I have looked, but all answers are for forms. I am doing this for final exercise for a university course, and (hmmhmm) must folllow obtuse instructions.
View 7 Replies View RelatedI have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad)
this is the
Private Sub ComboBox2_Change()
If Sheets.Application <> "Materiales" Then
Sheets("Materiales").Select
End If
Range("H:H").Select
Cells.Find(What:=ComboBox2.Value, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start()
If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then
Call Find1
Call kTest1
End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then
Call Find2
Call kTest2
End If................
I have a combo box, which is used after a search. The box only identifies a list of cells, but to the right of that, is somemore info that i need.
I would like it, so when you bring down the list window, and pick from the list, it knows which Address it is, so it can then HLOOKUP the information in the next column.
I can't seem to make it happen. I either cannot get it to let me know the Address of the cell I had choosen, or I cannot make it look to the right, and put the contents into another text box...
I have something like this:
Addresslist.plant = addrlist.offset(,5).value
how do i make it find the location ie $D$5 of the of item i selected from a combo box?
Right now I am constructing a macro so that upon exection, the user will be forced to select one of the dropdown menu options which are listed in a dynamic array. The dropdown menu should be in a popup of somekind created by the macro and not on any of the worksheets or charts. I would like to then assign the choice that the user makes to a variant. I have searched the web but not found what I am looking for and was hoping that someone could give me some phydocode that I can look at.
The restrictions that I am operating by do not allow me to place a combobox upon any of the worksheets which is what I find in all the examples posted online.
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
I'm trying to build a Userform with a combo box that is populated by a row of data, this will allow the user to select the column of data. What i want to do is find out the address of the data that is selected so I can work with.
ie
A1 = Apple
B1 = Orange
C1 = Grape
if the user selects "Grape" I want to find out the column that it is in. Also the Row of data is Dynamic so I need to re-check the range each time.
I have two comboboxs on a userform, both are populated like this:
(ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents
With Worksheets("Data")
Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp))
End With
With ComboBox4
.RowSource = rng.Address(external:=True)
End With
The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date
ComboBox4 is populated off of items from the data sheet
ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
Sub ComboBox1_Chg()
For Each Sheet In Worksheets
If Sheet. Name <> "CoverPage" And Sheet.Name <> Sheets("CoverPage").ComboBox1 Then
Sheet.Visible = False
Else: Sheet.Visible = True
End If
Next Sheet
End Sub
It works if I step through it (F8) but the ComboBox doesn't work. It's named ComboBox1, and in the properties the ListFillRange shows all of the names in the list in the ComboBox correctly.
Not overly familiar with ComboBoxes but what I want to do is load a ComboBox with data based upon the selection of another ComboBox
Please see attached example.
ComboBox1 - I can get to load.
ComboBox2 - I want to load but only those lines that match the above selection
TextBox - Load with the data on row selected by ComboBox2
I have a Combobox with it's 'RowSource' set to two columns x 1500 rows on a spreadsheet. The Combobox is set to 'fmMatchEntryComplete'. When the user types in invalid text I get an "Invalid Value Property" error. I would like to validate the Combobox so that the user cannot type text other than available in the list, or not allow for the focus to be taken away away unless the item is a match to the list. At present due to the interaction of other controls on the userform, the only way to clear the error is by pressing the 'Escape key'. I have a button designed to reset the 'RowSource' of the Combobox but even after adding a 'MouseMove' event to this button with code
Application.SendKeys "{ESC}"
I have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
View 9 Replies View RelatedIs it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
View 2 Replies View RelatedI have a dynanic range named Room on B1. My combobox1 rowsource is linked to the Dynamic range Room. I would like to be able to delete the the specified selected room from the combobox and the next 3 column C,D,E (delete Shift cells up)
View 2 Replies View RelatedI'm using combo boxes. Initially I used combo boxes from the Forms toolbar, however the text in the combo box was to small. Now I'm using combo boxes from the Control tool bar. However, i would like the link cell to show the number of the entry in the list (like the forms control box) and not the actual entry. Is there an option I need to select in properties, or is there some VB code I can attach to the combo box ?
View 4 Replies View RelatedHow can I get a combobox to list the values in a range of cells eg.
A1:A5 = 1,2,3,4,5 etc
I've tried...
ComboBox1.List = Range("A1:A5")
But that dont work (it was more of a guess)
I am trying to run a macro once a particular word shows up in the combo box. now in my chase i could try to use VBA code to run the macros such that once the arrow is used in the combobox to select a certain word a particular macro labled the same name as the word chosen would run.
View 5 Replies View RelatedI have a combobox on a spreadsheet it is populated on a sheet called teams :
The Format control has an input range of: Teams!$B:$B
Now this has a few thousand empty cells in the range but I would need it to only populate with the cells that are not empty.
I have a worksheet with following values:
A
B
C
1
Shorts
75
[Code]...
Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".
What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.
Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.
I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.
Column A2:A100 contains part description various len lengths max is 50 min is 22.
Column B2:B100 contains scrap qtys.
In column C2:C100 in need to join the text in A and B.
i want the scrap qty's all to be alligned i.e level, as column C is shown in a userformlist box.
meaning joining text/values would look like this (ignore full stops)
dispenser calsberg .........70
tap beer......................... 80
cowl................................100
instead of
dispenser calsberg 70
tap beer 80
cowl 100
I am trying to change the value in a cell by referenceing it to another sheet. My cell is: Today it is 33F, have a nice day. Now, 33F should be called from another cell and should be inserted in this new cell. If I change the 33F in the other cell this change should be reflected in my text file.
View 3 Replies View RelatedI have a multipage control on a userform. On Page 8 of that multipage, I have label1, part of that label is modified by other parts of the program. This is done by the program writing to a sheet of Data and then the program pulls that info into this label. My question is,what is the correct format to populate the label?
see below: This is what I have in my Userform_Activate and Userform_Initialize subs:
CurrentVersion = Sheets("Data"). Range("N2").Value
Label1.Caption = "This will allow you to change the Caption of the UserForms through out the operational program. Some UserForms cannot be changed. The ending of" + Chr(32) + Chr(34) + "Automatic 2005 V" + Chr(32) + CurrentVersion + Chr(34) + Chr(32) + " will be added to what you enter below as default."
CurrentVersion is pulled off of the datasheet which is a number like 5.9.8.2. however it errors "Run time error 13 - type mismatch" I can only suspect the label1.Caption needs something like: Multipage8.label1.caption =
Join an array with Text elements to create a string that can be Evaluated
So for instance if I have Array("A", "B", "C") and I want to evaluate("=({" & Join(array, ",") & "})="A)"). Is there any way to do this without having to loop or push to a Named array first? I'll even take this evaluate thing if I can do it with text and numbers