# Greater Than And Less Than In One IF Statement?

Nov 26, 2002Is it possible to have the condition IF(H9>E9>G9,E9-G9,0) so that the calculation is only done if E9 is between H9 and G9?

View 5 RepliesIs it possible to have the condition IF(H9>E9>G9,E9-G9,0) so that the calculation is only done if E9 is between H9 and G9?

View 5 RepliesADVERTISEMENT

If A7 is equal to and greater than 95% than B7 is equal to "A". If A7 is equal to 91% but less than 94.99% than B7 is equal to "B"...

View 4 Replies View RelatedI have a value in E12, and i need a formula that looks at the value and if it is equal to or greater than 5, then the output should be E12 x 500 +1000, but if the value in E12 is greater than 5, then the output needs to add the original 5 x $500 and now include all greater than 5 to be x by $250 + 1000. I got this far, but if the value is greater than 5, i don't get the original 5 * 500 that i also need.

=IF(E12<=5,(1000+500*E12),IF(E12>5,(1000+250*E12)))

Is there a way to tell Excel to sum only up to a certain point? Like if A1 through AF equal 50, but I only want it to sum up to 40, to stop at 40?

Is there also a way to tell Excel using IF that if a statement evaluating a number is true or false, to return the value up until a certain number. For instance, if the value is 8 or less, then it should return that number, but if it exceeds beyond 8, say for instance 12, then if the value is 12, only return 8.

I know that if true the following formula would return a 1

=IF(I7= 500000 and if I wanted to return a 2 if the cell value was greater than 500000 but less than or equal to 1000000

I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."

(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:

=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")

(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.

How do I count the number of cells that have a value greater than 0 in a range of cells?

View 2 Replies View RelatedI have to make a table that shows that a if someone purchases

less than 5 items they receive no discount

5-10 items they receive 2% discount

11-20 items they receive 5% discount

21-50 items they receive 8% discount

over 50 items they receive 10%

and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.

I am currently using an Intersect statement in a worksheet module to perform two things:

1. Insert a time stamp into row 2 when row 1 has a price inserted

2.To clear that time stamp if the price is deleted at some later date.

My problem is with the time stamp value being deleted by the user.

If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.

I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?

I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.

View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.

My purpose is trying to look up

Code:

tb_SelJobID.Value

from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if

Code:

TbSelYr.Value

matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.

Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.

Code:

Sub CmdGo3_Click()

Dim Row As Range

Dim FinalRow As Long

Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range

Application.ScreenUpdating = False

[code]....

Windows 7 with Excel 2010

I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:

Code:

Sub testInsert()

Dim adoCommand As New ADODB.Command

Dim sQuery As String

Dim i As Integer

Dim strTest As String

strTest = "test"

[Code] .......

Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:

Code:

Sub testSelect()

Dim adoCommand As New ADODB.Command

Dim sQuery As String

Dim mrs As New ADODB.Recordset

Dim strTest As String

strTest = "test"

[Code] ....

The result I am getting looks like this:

9

8

7

6

5

4

3

2

15

14

13

12

11

10

1

I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.

I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.

"Invalid procedure call or argument"

I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.

I am looking to have one formula containing two If Statements that minus.

=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)

So the result of If Statement 1 minus the result of If Statement 2.

What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.

If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24

But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)

Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?

Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.

i.e.

Column A --- Column B ---- Column C

AB ------------ 0:02:22 ----- 04/14/2007

CW ----------- 0:03:13 ----- 04/16/2007

CW ----------- 0:01:42 ----- 04/13/2007

Thus, the value that should be returned is "04/16/2007".

I have a problem with a formula inserted with control+shift+enter

The formula is

MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))

In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.

Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.

The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.

I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0

I have a Macro of 55 Columns and 2000 Rows I need to change the value in several Cells of the row in which the value of AZ is 200.01 or more. I need the following if ANY Cell in AZ2:AZ2000 is equal or greater than 200.01 then the following Cell in that Row will equal the following:

AG = 20

AW = 11

AX = " " (BLANK)

BC = N

I have attached an example of the spread sheet with Macro embeded and how it should look after the above is run. I do not know if or how to I need to tag the macro within the attachement.

I'm struggling to complete this formula. No matter what the entry in M30 is

(which is a concatenated formula from another sheet), I only get the highest response, which is 18.

I'm assigning a risk score based on a dollar amount. The formula is: ....

This is what I am tyring to do. I would like B7 to show $60 once A1 is greater then 25.

View 3 Replies View RelatedSay I need to figure out bonuses based on income.

If the income is less than 100,000 then the bonus is 5%.

If the income is between 100,000 and 249,000 the bonus is $5000 + 6% the amount above 100,000.

If the income is between 250,000 and 499,999 the bonus is $14000 + 7% the amount above 250,000.

If the income is over 499,999 the bonus is $31,500 + 8% the amount above 500,000

What is the formula I need to enter to make this work.

Need to sum that won't work.

i'm using:

A B C

00:00 07:00 =if(A1>0,B1,"N/A")

07:00 04:00 =if(A2>0,B2,"N/A")

00:00 07:50 =if(A3>0,B3,"N/A")

00:00 06:50 =if(A4>0,B4,"N/A")

This doesnt seem to work though using time formats. Column C just brings through Column B no matter what is in Column A. I've attatched an example below.

I am trying to create a formula that will automatically calculate greater than or less than and then add x or y depending.

I am shipping some items and we can fit 100 or less in a small box that weighs 3oz and 100+ in a bigger box that weighs 6 oz.

I want the formula to look at the quantity and determine if the quantity is 100 or less it should add 3 and if greater than 100 then add six.

I tried tons of google searches but can't seem to figure it out. This is the first forum I could find that I figured might be able to help.

I have been doing this all by hand in multiple columns...

Here is my code as it is right now (With the correct range, and yes its a messy range :

[Code] ......

That is my range and thats the range I have to use (The stats are spread out in those rows. How I can get this to disregard 0's? Right now it seems to fail on the third rangevalue (For example in the range above it fails and highlights Y88), but if i remove that value it does the same on the next one instead, always the third.

I have tried =AVERAGEIFS(Range,">0") versions and also ones with /COUNTIF after and others but cant get this to work.

I have a list of dates B2:B248. All the cells have been formatted to date type dd/mm/yyyy.

I'm just trying to count the number that are earlier than a certain date.

I thought a COUNTIF function would work! I've tried DATE, DATEVALUE etc.

I can work with the dates ie B2 (which would have 23/08/2007)-1 comes out as 22/08/2007. However when I try if(B2<B3,"lower","higher") it gives me a false reading - even when B2 is earlier than B3.

How can I check if my list of dates is earlier than a specified date?

I want to do is count in a column numbers greater than 13 but less than 20.

I am also trying to write another formula that counts numbers equal to or higher than 1 but less than 12. In other words,

I do not want this count to include any cells that contain 0.

I have this table with min and max amounts that requires a fixed amount when when the condition is met. How do I write a formula for this. If result is >$0 but < $100 = $15 and so on. I canlt get it right..........

View 3 Replies View RelatedI have a table populated with equations. I need to write a function to find

the smallest value in that table. However, I want to ignore the zero values.

From a dataset containing 8, 5, 0, 7 I want to find 5, not zero.

I am trying to use Countif on a range of cells some of which have a value of "< 5" (ie less than 5), but for those cells it returns a sum of 0 (zero).

View 2 Replies View RelatedI am trying to format a column of data. What I would like to do is move the contents of the cell based on the number in the cell.

I would like to move the content if it is greater than 5, but less than 70. If the content is between these, move it to a given location.

Is this an if/then? Ive got a few programming books here but not sure how to relate what I want to do to an example in the books.

Copyrights 2005-15 www.BigResource.com, All rights reserved