All I need is to use the forecast function =FORECAST(I902,F832:F901,I832:I901) but want to substitute a hard coded from and to value list, such as something like =forecast(71,F832:f901,{1-70})
That is, forecast case 71 given a range of 1 through 70. What is the correct syntax to give a from and to value? Curly brackets don't seem to work, and I don't want to do a list like {1,2,3,4,5,6,7...} which would be a pain.
I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 Replies View RelatedWe have multiple macros that have been developed by various users in the company. Many of these macros have file paths hard coded into the macro to reference file locations with networked drives.
We are planning on making some changes to the network file structure which will break these macros. I realize we will have to go in and manually change all these. I want to ensure that the end users have the flexibility they want, but not have to touch each macro if/when folder structures change, or files migrate to SharePoint etc.
ini files, master reference Excel file...,
I want to copy all rows from my input sheet that have a date less than the date in cell B3 of the output spread sheet and are contained in the stock table (range A7:B17) Sedol in column B Is a unique identifier. I started to do this but am lost.
View 6 Replies View RelatedI am trying to divide hard coded financial data by a named cell that will allow me to toggle viewing the financial data in dollars, thousands of dollars, and millions of dollars. I have named my toggle cell _000s and I have used Go To Special to highlight all of the hard coded data in my financial spreadsheet. Once I have done this I would like to Copy my _000s toggle and divide the hard coded values by this cell. I am using copy and then paste special divide by but I am having no luck with this tactic.
faster more efficient way to go about this rather than individually changing each hard coded item?
I pulled a set of financial statements from a database into Excel. All of the values are hard coded but I would like to make them dynamic, while maintaining the original content. For example, If cell C3 is a revenue figure for 2012 ($1,000) I would like to link it to cell C5, which will be a currency conversion rate (2.0). So I would like cell C3 to read =1000*C5, which would equal 2000, and for cell D3 to equal 2013 sales*D5, etc. I would also like this to go across a specified range so that I can also change operating expenses, taxes, etc over a number of columns (dates) that I define, all linking to the conversion rate for the given year. Having another tab where you link and anchor is an option but I would prefer something in VBA where I can qickly include this functionality with new workbooks that I download.
I am using Excel 2010.
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
I now can open all the workbooks in a filefolder and look at each of the sheets in each file and build an array to consolidate a range from one sheet to another. The problem is that the one range is hardcoded in the script (because that is what I was using to test.) I have written code to build an array of 66 rows and 5 columns that are stored in a worksheet in a named range.
how arrays work so I can use both of these arrays - one array ConsolParams(), to identify the range in the Sources part of the consolidate statement. The other array MyArray() stores the sheet names. Actually ConsolParams also stores "to" range now hardcoded as "J11".
Option Explicit
Private Sub cbConsolidateToRollups_Click()
Dim MyArray() As Variant
Dim Source As Variant
Dim sToPath As String
Dim sRollUpWB As String
Dim sRollUpToWs As String
Dim sRollUpFromWS As String
Dim sShtName As String
Dim sSourceWS As String
Dim nShts As Integer
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Dim WB As Workbook
Dim i As Integer
Dim r, c, p As Integer
Dim ConsolParams(5) As Variant
Dim CostType, RangeName, FromRange, TargetCell, TargetReport
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False.......................
I have discovered that my blue highlighted code posted below isn't deleting the visible rows of filtered data as expected.
Code:
With core_data
.Activate
.Range("D5").Select
Dim rngToDelete2 As Range
llastrow = 0
lmergedelete = 0
llastrow = .Range("a65536").End(xlUp).Row 'calculate the last row visible
'filter the visible rows to include only those rows in which dupphase3 = "DUP" (ie. duplicated rows)
[Code] ....
Additionally, and I'm not sure if it's related to this, but I am receiving an error with the red line .... "Application-defined or object defined error".
In this file i did paste special values so the links are no longer there, but in my original file alot of the values you see in the cells are pulled from other worksheets ( thats just so you know to lookin values of the cells and not the formula ).
I basically need row 18 starting from Column O to self populate.
Its based off of which has 1's in the Column. I have the completed here manually just to show you what i am looking for . I usually have to go to row 3 and Enter the data manually depending on which 1's are filled in for the column.
If i could have a method of having row 18 starting with Column O to self populate based off those 1's
But the formula seems to be working properly.
I've got ALOT of parentheses, 5 nested IFs, 5 ANDs, 4 ORs. The ANDs and ORs are within the IFs.
While editing the formula, I can, at times, achieve the condition where the cell references become color-coded. Or at least some of them do. But, when I get to this point, I'm usually at a spot where I can see the formula isn't right.
I'm confused. What does it mean when my text is all red when I go to edit a formula? Did I hit some limit? Again, I don't get error messages and the formula seems to work properly.
I am having a problem with excel, specifically a formatting/lag issue. I believe I know what the problem is, but I do not know how to solve it.
The file was too large to upload here, so you can find it in my dropbox.
The issue sheet is labeled Chain. Scroll down to the bottom to see the lag and delay.
After formatting many rows and columns of cells, all of the rows below the useful information has been formatted in different ways as well. This means thousands and hundreds of thousands of cells are formatted and doing nothing.
Just hiding the cells (which they are right now) takes forever, and you can clearly see the lag when selecting cells in the bottom row.
I have a web query which updates regulaly, however, a lot of information is prodcued which i dont need or want. I know that the information I do want will always be in a single column, usually A or C.
The problem is further complicated. If I have the following search list on sheet1 column A:
Search List (sheet1) Web Query results (Sheet2) Known bad data (sheet1)
A AB AB
B E DE
C F
D A
E B
F C
G DE
I need to be able to search through the information returned by the web-query, and find the first exact match in the returned data that exists in the lsearch ist, so in the above table the first exact match would be row 2 which contains only an E. Row 1 with AB is not a match as it does not exist in the search list.
So, having identfied where the first entry I am interested in (E) is, we need to copy all the cells below it until we find the first entry which then exists as an exact match in Known bad data column.
If all goes to plan, running the macro on the above data would output the following to sheet 1:
E
F
A
B
C
Has anyone created a marcro that will convert all the worksheets to Hard number, changing the formula results, (by Copying and paste, special, value). all at once?
i have a column that is seperated by hard returns how can i seperate them into new columns.
can i find replace a hard return and then text to columns.
I have a string in a cell which is essentially comma separated and want it in the same cell but with enters instead of commas. Cell info to start with would look like this
Bob, The, Builder
And the result I am looking for is
Bob
The
Builder
All within the same cell so I can create a label which uses this information on a user form. I have attached a small example.
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies View RelatedHow to "hard code" a cell's fill color? I want to assign a cell's fill color to yellow. While setting the fill color is easily done, my problem is that as soon as I paste data into that cell, it looses its fill color. Is there a way to tell the cell to never change the fill color?
View 1 Replies View RelatedNeed macro that automate our QC department. What the macro does is it looks up the item number based on the barcode that the scanner reads and brings up the item number, the item description, total of units in a case, how much a single box of the item will weigh and how many units in the inner box may be sold at one time. The trouble is that not all items have an image available so that the person who is doing the checking knows what the item looks like.
There is a Logitech webcam setup to take pictures of the items. The following code allows us to import the image of the item into excel in a given cell:
I have a userform that contains a textbox. How can I insert a "hard return" in the text portion to include a blank line between paragraphs?
View 2 Replies View Relatedcode they have in use for saving emails and attachments to hard drive using VBA. I have found the attached- which is close although it only [URL]downloads attachments. I would like to go through the inbox and download files received on a specific date, from the inbox subfolders to sub folders on the harddrive
View 4 Replies View RelatedIs it possible to lock a cell so that the user must enter the number manually as opposed to using a formula.
There is a cell on one of our spreadsheets that the user should be hand entering the numbers from the general ledger this is done to ensure that the general ledger balance is the same as the spreadsheets totals. However most of the user insert a formula that just copies the number from above into this cell that should be hand entered.
Cell A1 is HEAT_CODE
Cell A2 is W5H
In cell
=DMIN(Database,"Cost",A1:A2) return the proper value
I need something like the following so I can use fill down.
=DMIN(Database,"Cost","HEAT_CODE"=A2)
the above returns #VALUE! error.
Is there an easy way to populate a combobox with a list of directories on the hard drive?
I want to create a way for a user to specify a file without having to type in the full address by hand.
I would like to start in the c:/ root and list the directories in one combobox and the excel files in another combobox. Then if they select say "desktop" it displayes the directories in "c:/desktop" and the excel files contained there in. Then if they click test it does directories in "c:/desktop/test" and so on.
I have a spreadsheet that was an export from an old program. The ý symbol indicates the start of a new line within a cell, is there an easy way to do a search for the ý and replace with a hard return?
View 9 Replies View RelatedAssume a workbook with some nice pictures.
How do I save all of those to D:TEMP on my Hard Disk ?
I have a function
VB:
Function f1(Matrix As Range)
'Does something and returns f1 = a double
End Function
And a second function which defines and constructs a matrix of doubles to use as an argument in f1 to return a double:
VB:
Function f2(dD As Double)
Dim MatrixRed() As Double
Redim MatrixRed(1 To dD, 1 To 10)
For i = 1 To dD
For j = 1 To 10
MatrixRed(i, j) = i * j
Next
Next
f2 = f1(MatrixRed)
End Function
I get an output error (#VALUE). I think it has something to do with MatrixRed not being a range anymore?
I'm in the military and for maintenance we use the Julian date the format goes as follows "09357" that is simplified as 09 = the year and 357= the three hundred and fifty seventh day of the year. so 09357= 12,23,2009..
so on to my question:
how can i make excel auto convert the julian date to the regular date and vice versa?
Is it risky for someone to edit an excel document while it is still in the flashdisk or external hard disk? I was told that this habit can lead to loss of data or the data can be affected if someone does this. I was told that I have to copy/cut paste the document onto my desktop, edit/ work on it then move it back to the storage device. Is all that work necessary, or can I simply work on the document while it is still in the flashdisk or external hard disk..
View 6 Replies View RelatedIf I want to improve my excel performance like ability to open multiple excel and sheets to perform calculation, should I change to a SSD or a faster intel chip? My current PC sometimes give me a black screen for my excel sheet or is unable to save certain sheets when I open too many sheets.
View 3 Replies View Related