I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 RepliesAll I need is to use the forecast function =FORECAST(I902,F832:F901,I832:I901) but want to substitute a hard coded from and to value list, such as something like =forecast(71,F832:f901,{1-70})
That is, forecast case 71 given a range of 1 through 70. What is the correct syntax to give a from and to value? Curly brackets don't seem to work, and I don't want to do a list like {1,2,3,4,5,6,7...} which would be a pain.
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
I want to copy all rows from my input sheet that have a date less than the date in cell B3 of the output spread sheet and are contained in the stock table (range A7:B17) Sedol in column B Is a unique identifier. I started to do this but am lost.
View 6 Replies View RelatedI am trying to divide hard coded financial data by a named cell that will allow me to toggle viewing the financial data in dollars, thousands of dollars, and millions of dollars. I have named my toggle cell _000s and I have used Go To Special to highlight all of the hard coded data in my financial spreadsheet. Once I have done this I would like to Copy my _000s toggle and divide the hard coded values by this cell. I am using copy and then paste special divide by but I am having no luck with this tactic.
faster more efficient way to go about this rather than individually changing each hard coded item?
I pulled a set of financial statements from a database into Excel. All of the values are hard coded but I would like to make them dynamic, while maintaining the original content. For example, If cell C3 is a revenue figure for 2012 ($1,000) I would like to link it to cell C5, which will be a currency conversion rate (2.0). So I would like cell C3 to read =1000*C5, which would equal 2000, and for cell D3 to equal 2013 sales*D5, etc. I would also like this to go across a specified range so that I can also change operating expenses, taxes, etc over a number of columns (dates) that I define, all linking to the conversion rate for the given year. Having another tab where you link and anchor is an option but I would prefer something in VBA where I can qickly include this functionality with new workbooks that I download.
I am using Excel 2010.
We have multiple macros that have been developed by various users in the company. Many of these macros have file paths hard coded into the macro to reference file locations with networked drives.
We are planning on making some changes to the network file structure which will break these macros. I realize we will have to go in and manually change all these. I want to ensure that the end users have the flexibility they want, but not have to touch each macro if/when folder structures change, or files migrate to SharePoint etc.
ini files, master reference Excel file...,
I now can open all the workbooks in a filefolder and look at each of the sheets in each file and build an array to consolidate a range from one sheet to another. The problem is that the one range is hardcoded in the script (because that is what I was using to test.) I have written code to build an array of 66 rows and 5 columns that are stored in a worksheet in a named range.
how arrays work so I can use both of these arrays - one array ConsolParams(), to identify the range in the Sources part of the consolidate statement. The other array MyArray() stores the sheet names. Actually ConsolParams also stores "to" range now hardcoded as "J11".
Option Explicit
Private Sub cbConsolidateToRollups_Click()
Dim MyArray() As Variant
Dim Source As Variant
Dim sToPath As String
Dim sRollUpWB As String
Dim sRollUpToWs As String
Dim sRollUpFromWS As String
Dim sShtName As String
Dim sSourceWS As String
Dim nShts As Integer
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Dim WB As Workbook
Dim i As Integer
Dim r, c, p As Integer
Dim ConsolParams(5) As Variant
Dim CostType, RangeName, FromRange, TargetCell, TargetReport
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False.......................
I'm trying to calculate Interest accrued from a specific date. The problem is payments can be interest only which when used should keep the next months interest at the same rate instead of decreasing because the principal hasn't been paid down.
Im having problems when over the course of a number of payments they are principal + Interest and Interest only which requires at times to add up the same interest amount for 2-3 months in a row, then add up a different interest rate, etc. Additionally if the reference date is say on the 15th and the interest date is the 1st then for the last month I need to calculate the interest on a daily basis based on the current interest rate for that month.
The reference cell is H5, the Date ranges are J2 - J12, and the principal fields are: K2 - K12.
In the next post I will include the Amortization schedule.
In this example the interest is accrued at the same rate months 1-7, then decreased for months 8 and 9. so the total interest accrued should be eqaual to: $7487.74 (see next post for schedule).
Microsoft Excel - ZZ_Loan.Calculator-Update.1.1.xls___Running: 12.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutH6H7H8H9H10H12H13H14=FGHIJKLM1 v 1.0 PaymentApply DatePrincipal + InterestAdditional PrincipalInterest Only2 1/1/2009 833.333 2/1/2009 833.334Quarter Close Backward 3/1/2009 833.335 Close Date9/1/2009 4/1/2009 833.336 Days of Interest0 5/1/2009 833.337 Beg Principal Balance$100,000.00 6/1/2009 833.338 Paydowns$980.41 7/1/20091,321.51 9 End Principal Balance$99,019.59 8/1/20091,321.51 10 Net Principle Due$3,562.50 9/1/2009 829.2711 Interest Due & Accrued 10/1/20091,321.51 12 Interest Earned (cummulative)$7,350.66 11/1/20091,321.51 13 Interest pymts (cummulative)$7,350.66 14 Net Interest Receivable$0.00 TEST [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
How do you multiply two column vectors D2:D6 and G2:G6 based on reference cells A3 and B3 that are equal to D1 and G1?
A
B
C
D
E
F
G
1
2
3
4
5
[Code] ......
I'm preparing an accounting model for my office use. How to solve the copying of formula to all other cells.
The detail is here:
Sheet 1:
1) I've entered a number 1000 in L2
Sheet 2:
1) I've entered a values in columns D,E,F,G
2) Calculations :
at G2 : the formula is =D2*Sheet1!L2
The problem is when I Copy the formula in G2 through G3, G4, G5........... it changes to =D3*Sheet1!L3, =D4*ValidData!L4, =D5*ValidData!L5 and so on... but it should be =D3*Sheet1!L2, =D4*ValidData!L2, =D5*ValidData!L2, so that the L2 value shall be constant for calculations in all cells.
I have the following table:
Month / Year / Value
JAN20060,73
FEB20060,76
MAR20060,76
APR20060,76
MAY20060,73
JUN20060,69
JUL20060,69
AUG20060,73
SEP20060,76
OCT20060,75
NOV20060,74
DEC20060,72
JAN20070,67
FEB20070,68
MAR20070,71
APR20070,75
MAY20070,75
JUN20070,74
JUL20070,71
AUG20070,68
SEP20070,67
OCT20070,7
NOV20070,73
DEC20070,75
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
I have a question regarding a vba formula in excel. I am trying to take a whole row ( range) of data and multiply each cell within that range by -1 if a particular cell is an Asset or Liability.
Function AFTER_REFRESH(Argument As String)
AFTER_REFRESH = True
If Range("G5:H5").Item(1, 55) = "LEQ" Then
Range("G5:H5").Value = (-1) * Range("BM5:BN5")
MsgBox "Yo"
Else
End If
End Function
Would I have to use an array?
Please see the attached .xls.
I've tried to replicate my formula (result is in cell J5) via an array formula but keep getting stuck.
Basically there is a 2 dimensional array of weights (range1, limits)
each range in range1 and "limits" has a midpoint
a constant value (Fixed Amt) is added to each midpoint in range1
then multiplied by another constant value (Inflation Index)
The value is then capped by corresponding value in the limits range
this is repeated for all points in the 2 dimensional array (range1,limits) (essentially weighting the results)
and the sum is returned.
I've been able to get most of the way with an array formula, but end up collapsing the array when I use the min function.
I have a column of values I need to multiply by a random number (percentage) within a range of numbers (15%-22%).
How can this be done?
I'm absolutely new to Excel and I've been trying to workout a formula to to test two conditions if true and derive the data from a 3rd column. In my attached excel file there's a Grade (A) , Status (B) and Mid Point (C) Tables. I'd like it to be formulated in a sense that forexample:
IF Grade= 1 AND Status= Q4 RETURN =3750*0.25
IF Grade= 1 AND Status= Q3 RETURN =3750*0.5
IF Grade= 1 AND Status= Q3 RETURN =3750*0.75
IF Grade= 1 AND Status= whatever (I mean whatever I input in this cell then it would retrun 3750 ofcourse satisfying the condition grade= 1) RETURN =3750
IF Grade= 2 AND Status= Q4 RETURN =5500*0.25
IF Grade= 2 AND Status= Q3 RETURN =5500*0.5
IF Grade= 2 AND Status= Q2 RETURN =5500*0.75
IF Grade= 2 AND Status= whatever (I mean whatever I input in this cell then it would retrun 5500 ofcourse satisfying the condition grade= 2) RETURN =5500
................
I need to use here.
Left column will be numbered 1, 2, 3, 4, etc
Top row will be beginning with $8.00, then 6.20%, then 1.45%, then 0.60%.
By me multiplying $8.00*6.20% = 0.50
$8.00*1.45% = 0.12
$8.00*0.60% = 0.05
Which then brings to my total of 0.66 (when adding all the totals)
$8.00 6.20% 1.45% 0.60%
1 $8.00 0.50 0.12 0.05 0.66
2 $16 0.99 0.23 0.10 1.32
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
I am trying to do is to write a code that will change the values of cells B17:B25 to "false" when the user selects "true" from the drop-down box in cell B16.
Here 's my
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "B16" Then
If Target.Value = "TRUE" Then
Range("B17:B25").FormulaR1C1 = "FALSE"
End If
End If
End Sub
This is not working! Nothing happens when I select "TRUE" in cell B16!
I have a Macro 'Timenow' to give current time in a Cell of MS Excel, but then it changes all Cell values of sheet where the macro was used.
Sub Timenow()
'
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "h:mm"
Range("F5").Select
End Sub
Even assigning value to variable does not work:
Sub Timenow()
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
Dim TN As String
TN = Format("=now()", "h:mm")
ActiveCell.Value = TN
End Sub
how to restrict the macro to change the value of current/active cell only without effecting other cell values?
In this file i did paste special values so the links are no longer there, but in my original file alot of the values you see in the cells are pulled from other worksheets ( thats just so you know to lookin values of the cells and not the formula ).
I basically need row 18 starting from Column O to self populate.
Its based off of which has 1's in the Column. I have the completed here manually just to show you what i am looking for . I usually have to go to row 3 and Enter the data manually depending on which 1's are filled in for the column.
If i could have a method of having row 18 starting with Column O to self populate based off those 1's
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI have a loop that executes roughly 7.7 million times when my VBA program runs. Neednless to say it take a long time to run - usually a couple days.
The inner-most loop contains a line of code from way back in my early vba programming days when I knew even less than the small amount I know about programming now (and if you can follow that sentence you might be able to understand some of the spaghetti code I write :-) ).
for k = 1 to n
if Worksheets("Personell").Range("D" & Trim(Str(k))) > dtCompleted then ...
Would it be faster to use this syntax (which I just found out about):
if Worksheets("Personell").Cells(k,4) > dtCompleted then ...
It would cut out 2 functions calls, trim() and str(), so it would be faster, right?
I am almost embarassed to post the Range("D" & Trim(Str(k)) line of code because it looks so convoluted now, but that's how I learned to program, just fumbling through until it ran...
So in short, I just wanted to confirm that the cells() syntax run faster before I spend an hour editing and tested.
After formating I need to multiply by 2 . As you can see my Cells.Value = Selection.Value * 2 is not correct. How can I accomplish this?
With Range("I17:I4000", Range("I" & Rows.Count).End(xlUp)).Offset(, 1)
.Formula = "=ReplaceChar(I17)"
.Value = .Value
Selection.NumberFormat = "0.00"
Cells.Value = Selection.Value * 2
End With
I am looking for formula , single cell two numerical values , multiply in different columns
example :
Cell (A1) contain: =350,23+25,59 (two values in a single cell)
request:
in (B2) only first value so 350,23 multiply (x) by fixed number &in (C2) only second value so 25,59 multiply (x) by fixed number
i need a macro which puts the formulas into the cells as per attached.
the number of rows between the "beam" can be variable
the number next to the beam will be variable.
the number of "beam" rows is vaiable
my thoughts where to do a find"beam" and refernce the cells address the create formulas off those points but dont have the skill to code this
beam macro.xlsx
I want to use a value in one cell as a row designation, and a value in another cell as a column designation. Ultimately, the values will be text which will refer to row and column headers. What formula would allow me to do this? example:
A1 contains B
B1 contains 2
B2 contains "tribbles"
An imaginary function might go like this........
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies View RelatedI have three sheets - Actual( which has actual figures from Jan - Dec), Budget ( figures from Jan - Dec) and a Summary sheet ( which is just the summary for the current month, say July and compares the budget VS Actual). Every month i need to change the summary sheet to the next months set of figures, say Augusts etc etc.
Currently i've been using find and replace, and changed the formula to the correct months column - but its a rather large spreadsheet( its a management accounts pack and has many many more sheets that link up - like lasts years comparison etc etc)
Is there any easy way of linking ( without VBA) or anything complex, so that each month i can change my data easily?
I have a master summary sheet that contains all the required information for 21 other worksheets. Each row contains the information for a single sheet. I have linked all the relative cells to the first sheet but would like create a formula that changes the row reference in each of the links rather than the tedious task of updating each individual link in every sheet.
I have tried using the indirect function but constantly get errors returned, the basic formula i have been using is: =INDIRECT("Summary"!C&,X1)
'C' is the column in the summary sheet that the information should be taken and 'X1' is the cell in the worksheet that will define what row the data should be taken e.g in one sheet the reference for that specific cell will be C5 and the next C6 and so on.
I have 2 Sheets in Excel: Sheet 1 & Sheet 2
Sheet 1 has some basic data (numbers) in a column, say AB1, AB2, AB4, AB15 (specific cells)
Sheet 2 basically references the data in a nicer template, with the basic forumala: ="Sheet 1"!AB1, etc..
Now...Sheet 1 has a new column inserted and new data added weekly, so AC1, AC2, AC4. AC15
How do I ensure that Sheet 2 recognises the new Column Insert (incremental letter) and references it automatically?