Hide All But Active Sheet In Workbook?
Dec 25, 2013
With first code user selects a sheet from drop down and that sheet is activated. (This works fine)
Now hide all other sheets is what I'm trying to do with the second code. (This IS NOT working)
I assume I can either put the second code in the change event code or call it from the change event code once it works.
Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address "$A$1" Or Target.Cells.Count > 1 Then Exit Sub
[Code].....
View 2 Replies
ADVERTISEMENT
May 17, 2013
i need a code to hide the sheets tab from the workbook. and only show the horizontal scroll bar and vertical scroll bar.
View 1 Replies
View Related
Dec 27, 2013
I'm looking for VBA code that will:
Hide a sheet whenever it is not the active sheet
View 3 Replies
View Related
Sep 17, 2012
I would like to hide/Unhide last active four columns by clicking a command button.
Example:
Columns a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z
When ever i click on command button for the first time, last four columns should be hidden, (w,x,y,z)
On next click, columns (s,t,u,v) should be hidden.
I want similar functionality to unhide the columns with different command button.
View 5 Replies
View Related
Jun 20, 2008
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer
'Dim thiswb As Workbook
officen = Range("A2").Value
Set thiswb = ActiveWorkbook
' Open the Active Info file
Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx"
' Dim sourcewb As Workbook
Set sourcewb = Workbooks.Open"Active 20080616.xls"
Sheets("officen").Select
RowCount = ActiveSheet.UsedRange.Rows.Count
Range("B2").Select.............................
View 8 Replies
View Related
Mar 6, 2014
My requirement is as follows......
I want to get a copy of worksheet from specific workbook to active work book in which i want a copy of sheet get moved.
View 2 Replies
View Related
Mar 6, 2014
I have a Picture in a workbook kept open. ( workbook 1 )And i have some X workbook open....i want a copy of sheet from workbook 1 To X workbook which is currently active.
View 1 Replies
View Related
Jun 10, 2013
I am wanting to create a macro for excel that when run it it will copy the active worksheet and worksheet named "Timesheet" and copy them to a new Excel workbook named the same as the original file + "JobBrief".
View 3 Replies
View Related
Nov 3, 2008
Copy the active sheet that is open in a work book and save it to another file with the date in the name? For example Report_11-03-08.xls
The only problem I see with this. How could I also make it append a letter to report if the file already exits Example saved as
Report1_11-03-08.xls. Then just continue incrementing.
Sub CopySave()
Application.ScreenUpdating = False
ActiveSheet.Copy
Application.DisplayAlerts = False
ActiveSheet.SaveAs Filename:=ThisWorkbook.Path & "/" & "Report_" & Format(Date, "mm_dd_yy") & ".xls"
ActiveWorkbook.Close
Application.DisplayAlerts = True
Application.ScreenUpdating = True
End Sub
View 5 Replies
View Related
May 17, 2005
How can I save only the active sheet of a workbook in VBA?
View 9 Replies
View Related
Mar 2, 2010
I am creating a macro that will open another workbook and take all the contents off a page in it and paste the contents to itself.
The problem is that sometimes those workbooks will only have one page and it will have the data I need, but sometimes there will be two or three pages in the workbook, but again, with only one sheet that has data on it. How can I have the macro find the one page with data on it?
View 9 Replies
View Related
May 5, 2014
I got a workbook with a database in sheet1. I filter that database and copy - paste values the results to a new sheet. Next, I save that new sheet to somewhere on my drive. The thing is that I want to go back to my original database, and continue filtering. But that workbook is no longer the "active workbook". This is how it works:
sub DifferentClients()
For Each FieldWorkBy In Array("Client1, Client2,...")
MyDatabase.AutoFilter Field:=CountryCode, Criteria1:=Array( _
[Code]....
View 3 Replies
View Related
Dec 12, 2013
I have a userform which clones the latest sheet and produces copy of it on the next sheet. The first sheet they will be cloning is the sheet called 'template', I however want this to be hidden since I do not want anybody to modify a sheet which basically serves purpose of a template. And once cloned, it is no longer needed.
On the click of the command button, the macro will create sheet1 taking the info from sheet named 'Template' in the same workbook . And now on the next click of the command button, Sheet 2 is created taking the info from sheet1 and Sheet 3 is created taking the info from Sheet 2 and so on. Here is what I currently have, so how can i modify it in order for my scnerio to work?
To select the last sheet in the workbook
Code:
Sheets(Sheets.Count).Select
To create new sheet
Code:
Sheets(Sheets.Count).Copy After:=Sheets(Sheets.Count)Sheets(Sheets.Count).Name = MyEvent & " " & MySCN & "(" & ThisWorkbook.Sheets.Count - 2 & ")"
View 3 Replies
View Related
Aug 20, 2014
code to pull up all the sheet from closed workbook to active opend workbook.
Closed Workbook name : Create Position
Active Workbook name : EIB builder
View 1 Replies
View Related
Mar 26, 2008
I would like to link a macro to a button on the active sheet, that saves the active sheet In a New Workbook, with Format And Values Only. Preferably saved in the same location as the origonal workbook. This is my main goal.
If possible I would like the new workbook to be named from a chosen cell (E19) on the active sheet with date added.
View 8 Replies
View Related
Apr 26, 2009
I've stored all my on-line passwords (about 50 of them) in one sheet in an Excel workbook. I want to protect it so that if somebody somehow got access to it, they couldn't see the sheet, much less change anything.
I tried Tools/Protection/Protect Sheet and Tools/Protection/Protect Workbook, using a secret password. Then, nobody could change the data -- but they could still see it.
So then I hid the columns first, and then protected the sheet -- which did the trick. But that seems pretty cumbersome, because it involves two steps for me to open it up (unprotecting and then unhiding).
Is there a way to protect/hide in just one step so my sheet of passwords can't be seen by an intruder?
View 6 Replies
View Related
Oct 19, 2012
Is it possible to have a code that will hide a specific sheet everytime I will close the workbook?
View 3 Replies
View Related
May 14, 2014
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
View 4 Replies
View Related
Feb 27, 2014
I've been using the following code to bring in individual cell values from one closed workbook to an active one. I would like to modify this is possible to bring in multiple cells at once and also pull them into a different worksheet in the active workbook. Basically, my command button is on Sheet1 but I'd like the data to pull into a cell on Sheet2.
Private Sub CommandButton1_Click()
With Range("Q9")
.Formula = "='C:Users[Workbook Name.xlsm]Worksheet Name'! N27"
.Value = .Value
End With
View 6 Replies
View Related
Jul 18, 2014
I recon, IF Excel is hidden than Windows doesnt see it with ALT Tabs as program and doesnt put it as program in the taskbar.
Is it possible to set a form active as a program? While hide Excel?
View 3 Replies
View Related
Dec 10, 2013
I have on Sheet1 a table with a list of values in column A, and their corresponding picture in column B. On Sheet2 I have used the define name option to set up an index,match against the original table so that the relevant picture shows whenever someone selects one of the values in column A.
The problem is, while the pictures will change when the values are changed, because all of the pictures are "named", they will continue to show if a value not in the lookup table is selected.
Is there a piece of code that would allow me to specify if cell=blank,hide picture if not show picture?
I have seen the attached code, however this either shows or hides ALL the pictures on the active sheet, while I want to show or hide the picture in the active cell only.
View 1 Replies
View Related
Apr 30, 2008
Continuing with a large Macro I am trying to peice together, I have reached a hurdle where I need to hide all columns to the left of the ActiveCell (which varies week to week) back to column B.
I have the following code which selects the correct number of cells to the left of the active cell but doesn't highlight the whole columns - just 3 cells for each column (very odd)
ActiveCell.Offset(0, -1).Range("A1").Select
Range(Selection, "B" & Selection.Column).Select
I'm sure it must be something to do with the
Selection.Column
part as when I write
Selection.Row
it just does 1 cell for each column (as to be expected)
I should mention I already have the coding to hide the columns, just need a way to highlight the relevant ones.
View 3 Replies
View Related
Jun 30, 2014
I run a model in Excel that automatically saves my file every xx iterations. After saving the file I want to make a backup of the file. Tried
[Code] .....
but get a permission denied error message.
I don't want to use .SaveAs as it is a huge file that takes a while to save and SaveAs has a tendency to break links that should not be broken..
View 13 Replies
View Related
Feb 6, 2013
I have some vba that opens a closed workbook, copies data from a named range and then pastes it to the active workbook.
However, what is happening is that the closed workbook is opened and only part of the data is pasted. What I would prefer to happen is this:
Open the closed workbook-->copy the named range-->paste(append) to next empty cell in column B.
Heres the code that I have got.
Sub Workbook_test()Dim wb As Workbook
Application.ScreenUpdating = False ' turn off the screen updating
Set wb = Workbooks.Open("G:WAREHOUSEPlanningSmartNew Training Plan raining plan.xls", True, True)
[Code]....
View 5 Replies
View Related
May 9, 2014
I am trying to transfer a value from the active worksheet in one workbook to another workbook. I keep getting a subscript out of range error on the line that uses activeworksheet command when I run my code.
View 3 Replies
View Related
Nov 20, 2006
I have a workbook that is a formatted report that I need to insert data from a name variable "CSV" file. I have created a macro in this workbook that calls an "Open" dialog for CSV files that I can use to browse to and open the source file. The macro then is supposed to "select all" copy and close the workbook then make the original workbook active and paste the data starting at row 2. The macro "seems" to be working perfectly except when I do the open the macro then makes the original workbook active, selects all copies then wants to close the original workbook. How can I tell the macro that the csv file that I just opened should be the active workbook, baring in mind that the name won't be known before the time it's opened so I can't hardcode the "active. workbook (NAME) "route.
View 9 Replies
View Related
Apr 22, 2009
I am trying to code a Macro so that i can take all the worsheets and save them as individual Workbooks. I wrote a macro that appeared to work, but, after it saves the first sheet as a workbook, i get a debug error.
MS VB Script error:
Runtime error '9':
Subscript out of range
Any advise would be greatly appreciated.
Thank you
Code is below..
Sub saveall()
'
'
For Each ws In ActiveWorkbook.Worksheets
ThisFN = "C:Documents and SettingsUserDesktop" & ws.Name & ".xls"
I = I + 1
Sheets(I).Select
Sheets(I).Move
ActiveWorkbook.SaveAs Filename:= _
ThisFN, FileFormat:=xlNormal, _
Password:="", WriteResPassword:="", ReadOnlyRecommended:=False, _
CreateBackup:=False
Next ws
End Sub
View 9 Replies
View Related
May 14, 2014
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
View 2 Replies
View Related
Jul 30, 2009
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
View 9 Replies
View Related
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
