Auto Hide Sheet When Workbook Closed?
Oct 19, 2012Is it possible to have a code that will hide a specific sheet everytime I will close the workbook?
View 3 Replies
ADVERTISEMENT
Importing A Sheet From A Closed Workbook
Dec 10, 2004I found this code on the net, and it works, it DOES import the sheet specified from a closed status, but it adds 0 where there were blank cells.
The worksheets are static, the names will not change, but the information on them varies in # rows but the # of columns depends on the page..
The use of this import is to upgrade the program, by importing the sheets from the old version.
The first part browses for the file, which is good, because it could be stored anywhere and named anything.. I have it set up to "Click to Import"....
Private Sub CommandButton1_Click()
GetValuesFromAClosedWorkbook "C:", "Book1.xls", _
"Personnel", "A:H"
End Sub
This next part does the importing, but it fills all the columns and rows that were blank with 0's and fills all the way down to 65536 thru my column H that I specified that had data above.
Sub GetValuesFromAClosedWorkbook(fPath As String, _
FName As String, sName, cellRange As String)
how this code can be modifed to do the following..
Detect and copy ONLY the used range of the closed workbook.
Macro To Open Closed Workbook And Add Sheet
Sep 5, 2012create this macro.
I am trying here is,
I have open workbook with command button, by pressing it it should do followings
Copy Range ("A1 : C20")
Open a closed workbook
Add Sheet with date format
Paste the range in Created sheet in A1 to C20 column.
VBA To Import All Sheets From Closed Workbook To Active Sheet?
Aug 20, 2014code to pull up all the sheet from closed workbook to active opend workbook.
Closed Workbook name : Create Position
Active Workbook name : EIB builder
VBA Copying Data On Closed Sheet To Open Workbook
Jul 20, 2009Ive been searching this forum for simmilar topics but the info on them is all different and I cant get this to work.
All I want to do is open another workbook by
Copy Range From Closed File & Paste To Closed Workbook
Apr 26, 2008Is there code that will take certain data from one Excel sheet to another named file in a different place on the network? Example Copy cell aa47 from "Recent Faxes.xls" that sits in "correspondence" folder. Then paste into cell B25 "Current Documentation.xls" in the "Sales Contacts" folder
View 2 Replies View RelatedImport Data From Several Closed Workbooks To A Single Sheet In An Open Workbook
Aug 3, 2009I need to import the data from a specific sheet (same named sheet on all closed workbooks) to a sheet in an open workbook. All the columns are identical in every workbook but the number of rows is variable, so the data from each subsequent workbook must be appended to the end of the current data.
Whenever a button is pressed, this macro will clear the sheet, then import the data starting in A3. The workbooks are in different folders but they all have the same name, so some sort of explorer window will probably be needed to actually select each file.
Macro To Copy Over And Paste Data In To A Work Sheet From A Closed Workbook
Nov 23, 2009I have a macro code which gets the file list from a folder i specify and puts it in to an excel sheet as a column. I have then made a drop down list from this so the user can select the file they want.
From this file i wish to copy the data on a sheet that i specify. For example the sheet "dump" from file FR7_19.11.2009.xls (which will be a closed workbook) and paste its content in to the sheet "dump" in Summary.xls
I have a macro which opens up the closed workbook FR7_19.11.2009.xls and copies the sheet "dump" and then creates a new sheet of the same name and content in my current workbook (Summary.xls). However when i wish to select a different file to load in to Summary.xls "dump" the formulas i have been calculating information from this sheet all come up with #!Ref errors. I know this is because the macro i use deletes the old dump sheet before re adding a new one containing new data.
I am therefore looking for a macro which will simply just copy and paste the data from any file i select in to a sheet named "dump" as the data is always set out the same in every file but the values are different. I assume this will then mean that any formulas i use relating to this "dump" sheet in Summary.xls will work because the sheet is no longer being deleted and re-added the data within it has just simply been copied over.
Auto Hide Columns If Data Sheet Is Empty?
Mar 6, 2014I've created an excel workbook to automatically create a report for my work. All you have to do is enter the data into the "DATA" worksheet. Easy. Only problem is that someone can easily ruin it if they try to run it when the "DATA" sheet is empty. I figure that if I can get two columns hide when it's empty and that would solve my problem. I've tried several VBA codes, but they don't work. Also, everything except the "DATA" sheet is protected to prevent accidently changes. This is the latest code I've tried:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "DATA!$P$5" And Target.Value = 0 Then
ActiveSheet.Unprotect ("password")
[Code].....
VBA To Hide Sheet In Workbook And Copying Hidden Sheet
Dec 12, 2013I have a userform which clones the latest sheet and produces copy of it on the next sheet. The first sheet they will be cloning is the sheet called 'template', I however want this to be hidden since I do not want anybody to modify a sheet which basically serves purpose of a template. And once cloned, it is no longer needed.
On the click of the command button, the macro will create sheet1 taking the info from sheet named 'Template' in the same workbook . And now on the next click of the command button, Sheet 2 is created taking the info from sheet1 and Sheet 3 is created taking the info from Sheet 2 and so on. Here is what I currently have, so how can i modify it in order for my scnerio to work?
To select the last sheet in the workbook
Code:
Sheets(Sheets.Count).Select
To create new sheet
Code:
Sheets(Sheets.Count).Copy After:=Sheets(Sheets.Count)Sheets(Sheets.Count).Name = MyEvent & " " & MySCN & "(" & ThisWorkbook.Sheets.Count - 2 & ")"
Auto Entering Data From Sheet 2 Into Sheet 1 Of Same Workbook?
Jun 30, 2013I'm looking for a formula that will paste an entire row from sheet 2 into sheet 1 of the same workbook when only 1 cell is typed.
I am trying to come up with a property access log for my guards so when they enter a tag number from(sheet 2 column B) into (sheet1 column D) , it will auto fill sheet1 column C and E with the entries from sheet 2 column A and C.
Protect And Hide Sheet In Workbook?
Apr 26, 2009I've stored all my on-line passwords (about 50 of them) in one sheet in an Excel workbook. I want to protect it so that if somebody somehow got access to it, they couldn't see the sheet, much less change anything.
I tried Tools/Protection/Protect Sheet and Tools/Protection/Protect Workbook, using a secret password. Then, nobody could change the data -- but they could still see it.
So then I hid the columns first, and then protected the sheet -- which did the trick. But that seems pretty cumbersome, because it involves two steps for me to open it up (unprotecting and then unhiding).
Is there a way to protect/hide in just one step so my sheet of passwords can't be seen by an intruder?
Hide All But Active Sheet In Workbook?
Dec 25, 2013With first code user selects a sheet from drop down and that sheet is activated. (This works fine)
Now hide all other sheets is what I'm trying to do with the second code. (This IS NOT working)
I assume I can either put the second code in the change event code or call it from the change event code once it works.
Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address "$A$1" Or Target.Cells.Count > 1 Then Exit Sub
[Code].....
How To Get Auto Macro To Run On First Sheet Of Workbook
Feb 15, 2014How to get an automatic macro to run from my first sheet (sheet 1 of 10).
However, on my first page, users must enter 36 numbers in exact order and then those numbers need to automatically be copied to start at A3 on my following 9 sheets.
Auto Calculation On Sheet But Not Workbook
Feb 11, 2013Can I set up my workbook so that the formula Auto Calculation works on one of the sheets, but the other two sheets only calculate on saves.
I have three sheets in a workbook. 1 of the sheets is used for data entry and there are quick small visual formulas on that sheet that make data entry easier and produce mistake double checks. But the other two sheets are formula intensive and take a few minutes to calculate which is fine considering it only calculates on save. But I need to be able to have the one sheet calculate automatically while these other two are only on save.
VBA Code To Hide Sheet Tabs In Active Workbook
May 17, 2013i need a code to hide the sheets tab from the workbook. and only show the horizontal scroll bar and vertical scroll bar.
View 1 Replies View RelatedVBA - Button Command To Auto-Hide Rows With Value HIDE
Jun 9, 2013Sub Button294_Click()
If Sheet1.Range("A34:A94") = "HIDE" Then
For Each cell In Range("A27:A94")
If UCase(cell.Value) = "HIDE" Then
cell.EntireRow.Hidden = True
End If
End Sub
Hide The Entire Row If The Remarks Is CLOSED?
May 7, 2014I got this sheet wherein i needed to hide the entire row when i print it if the REMARKS was already closed.
View 2 Replies View RelatedPull Data From One Closed Workbook Into Active Workbook With Command Button
Feb 27, 2014I've been using the following code to bring in individual cell values from one closed workbook to an active one. I would like to modify this is possible to bring in multiple cells at once and also pull them into a different worksheet in the active workbook. Basically, my command button is on Sheet1 but I'd like the data to pull into a cell on Sheet2.
Private Sub CommandButton1_Click()
With Range("Q9")
.Formula = "='C:Users[Workbook Name.xlsm]Worksheet Name'! N27"
.Value = .Value
End With
Copy Worksheet From Closed Workbook To Current Opened Workbook
Aug 21, 2014I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
View 7 Replies View RelatedCopy Data From Closed Workbook And Append In Active Workbook?
Feb 6, 2013I have some vba that opens a closed workbook, copies data from a named range and then pastes it to the active workbook.
However, what is happening is that the closed workbook is opened and only part of the data is pasted. What I would prefer to happen is this:
Open the closed workbook-->copy the named range-->paste(append) to next empty cell in column B.
Heres the code that I have got.
Sub Workbook_test()Dim wb As Workbook
Application.ScreenUpdating = False ' turn off the screen updating
Set wb = Workbooks.Open("G:WAREHOUSEPlanningSmartNew Training Plan raining plan.xls", True, True)
[Code]....
Can Auto-hide Rows Or Auto-set Row Height
Jun 27, 2014I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell?
Can Auto-Hide Rows Or Auto-Set Row Height?
Jun 27, 2014I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell? There is only one column of data.
Copy Specific Data From Monthly Auto Generated Workbook To Master Sheet
Mar 26, 2014I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
Copying EMF Object From Closed Workbook Into Open Workbook
May 27, 2014Please see attached files.
Book1.xlsx
test.xlsm
I am trying to copy the emf image object from "Book1" into the "test" workbook whilst the test workbook is open and Book1 is closed. The code I have put together currently sort of works, I mean that it copies the text data over but does not copy the object which is what I require.
Transfer Data From Open Workbook To Closed Workbook
Dec 16, 2008im looking for some code to transfer cells a3,d6,f9,i6,k10 and i18 from open workbook named "hello"
to
closed workbook named "goodbye" and input to next available row
a3 to a1
d6 to a2
f9 to a3
i6 to a4
k10 to a5
i18 to a6
Copy From Closed Workbook Then Create New Workbook
Jan 31, 2007I've got a problem with this code, have been wracking my brains about. Here is the process I am trying to do:
1) Copy a range (a2:av1000) but (ideally) find the last populated row from a closed workbook (with a different password)
2) Create a new workbook and paste this data into it at A2
3) Close all the workbooks but only save the new one.
Copy From Closed Workbook To Open Workbook
Apr 25, 2007I'm trying to write a macro that accomplishes the following:
" Book 1" is already open. The user runs a macro that lists all .xls files in directory "d:measurements" The user selects the desired file from the list or box the macro copies from this "book 2" " sheet 3", " range A6:I107 and pastes (values only) into "book 1", "sheet 5", "range A6" End of macro.
I want to accomplish this without opening the selected file (book 2)
Pull Value From Closed Workbook Where Workbook Name Is In A Cell
Nov 24, 2007I want to open an excel file whose name is a value in a spreadsheet, and then pull a value from the spreadsheet I queried into my existing workbook. Here is the syntax i have so far:
to note: I'm calling the workbook in which the macro is located testproject.xls, and I'm using [integer].xls as my list of files that the macro will query. Ultimately, this code will go in a loop.
Set currentCell = Worksheets("Sheet1").Range("A1")
varCellvalue = currentCell.value
Workbooks.Open "path_of_file" & varCellvalue & ".xls"
Windows("testproject.xls").Activate
currentCell.Offset.(0,1).Select
ActiveCell.FormulaR1C1 = "=[3.xls]Sheet1!R1C1"
The problem is, I want [3.xls] to carry the sale value as varCellvalue with .xls appended, and not be kept static at 3. I tried inserting & varCellvalue & ".xls" into the brackets, but with no luck. My only difficulty is getting [3.xls] to vary along with varCellvalue.
Macro To Copy Sheet From Closed Work Book And Overwrite If Sheet Already Exists
Nov 22, 2009I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View Related
