I need to highlight a cell when its value exceeds parameters based on the production line it comes from. If the line is K11, then i need this cell to highlight when its value is either < 0 or greater than 221. If the line is K21, than it needs to highlight when its value is <0 or greater than 474.
I am writing a data validation macro which checks various conditions and highlights cells if they are incorrect.
i.e. If cell in column D = "specific text", then cell in column AH of the same row must = "specific number". If it is not that number, colour the cell red. If another cell in column D = "another specifci text", then cell in column AH of the same row must = "specific number". If it is not that number, colour the cell red.
What I've found is that I can get one condition of this nature to work, but if I run two or more in the one macro, that they supercede eachother (and thus the final one is the only one that works).
See below sample code.
Code:
Dim val As Integer
val = UsedRange.Rows.Count
For i = 2 To val Step 1
[Code]...
I want to highlight all the cells in a worksheet that have dropdown lists in blue color. Not sure how to do it.
View 13 Replies View RelatedI have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.
View 3 Replies View RelatedOn the attached sheet I am trying to indicate that enough data has been entered by highlighting the entire column. Any 3 cells in Rows 7-13 and 18-36 will be filled in with any of the values from cells O6-O11 (hidden). When the total = 6 i would like to highlight the entire column to indicate it has been completed.
The aim is two fold: to ensure that the correct number of points is allocated in each race, and secondly to indicate which column is the next to be filled in (as human error sometimes misses the column and adds the points to either the previous or next columns). You could call it idiot proofing the sheet. At present i have the cells in Row 37 conditional formatted to show this, but would much prefer the entire column to highlight.
I have the following data in 1 of the tabs.
[TABLE]
ClassSequenceAB
10SE132422
20SE23212
20SE321
20SE23425
10SE332455
15SE132412
10SE234
[/TABLE]
I want a unique count of sequences in a different for that class only if that particular row in 'A' or 'B' is populated. The result set should be as follows:
[TABLE]
ClassAB
1032
1511
2012
[/TABLE]
Can this be achieved through a formula?
I am working on a sheet which calculates payroll. I have a list of people in column A, and in column B, i have their different professionnal status. Their wages vary according to their professionnal status and are in another column C. How can i sum up the wages of only certain people, based on their common professionnal status in column B?
View 3 Replies View Relatedim looking for a formula that will find matching dates in column a and then i want to see if column b has a matching time in it
View 11 Replies View Relatedthis seems like such a simple thing to do but I just cannot suus it out. Basically I want to Highlight a cell depending on another cells value:
ie. I have a value in Cell A1 and a value in Cell B1, in Cell C1 I have an IF statement that dsplays the word 'NO' if the values in A1 & B1 are not equal. In Cell D1 I have the word Fault. I would like to highlight Cell D1 if the Cell C1 displays the word 'NO'
What is the line of code in VBA that allows me to highlight a range of cells (in a column) to the end of the range? e.g. Selection is A2, highlight to end of range in column A. I know this is simple, but I'm new to VBA. Unsuccessful searching the posts.
View 2 Replies View RelatedIs there a way to automaticaly highlight multiple cells if there is data in two other cells else were? What kind of programming will I have to use. I.E. highlight cells D1:E15 only if there is data in cells A:2 & B2
View 3 Replies View RelatedWhat I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
I have a large document control register and it is updated daily and posted to a cloud for many people to access. It is very time consuming to constantly jump in and out and highlight and unhighlight as many things as there are and keeping track of which items that need to be unhighlighted. The thing I'm trying to figure out is if there is a formula for this...If i change any cell in a row I want the row to highlight itself entirely, but after 24 hours I want the highlight to expire. Is there a formula or function I can use to make this happen?
View 4 Replies View RelatedI have a worksheet 200+ rows with 7 columns (euro lottery numbers) I had great help last night to highlight any matching numbers. I'm getting lazy now, can anyone help with a formula to highlight a cell in an adjacent column when 2 or more numbers in the corresponding cells match the winning numbers, I know all I have to do is look down the columns and check but if a simple formula could be inserted it would save me perhaps missing something.
View 14 Replies View RelatedI have Column A with 380 cells filled in with numbers (A1-A380) i.e. numbers like..456758, 567848 etc etc
Column B has a subset of those numbers, maybe 80-90 or so (B1-B90).
What I want to do is either highlight the numbers in Column A that also appear in Column B in yellow, OR delete them from Column A altogether
Is it possible to highlight a1:h1 if cell a2 contains dark?
i used this code in cell i1-->=MATCH("dark",a2,0)
and i dont know what's next, my friend in the office told me to use conditional formatting.
The Special GoTo function doesn't have a listing for highlighting (going to) only protected or (preferribly) unprotected cells. Is there an easy way to do this?
View 9 Replies View RelatedI'm use with this macro to Highlight duplicate cells BUT the macro highlight only from the second duplicate
I need to highlight ALL duplicate cells in column A:A .
FUNCTION like " =COUNTIF($A$1:$A$11,A1)>1 " it's not good for me in this case, i need it with a fast macro
I need to highlight cells for all of the products and rates I need to get pricing for. I have a macro that goes out to my data and pulls in each different rate and program (columns BM:BN). That macro also sets the first note rate in the range to the lowest of the group, so this will always be different.
I now manually highlight each cell that I need to get pricing, but would like to create a macro that looks up those codes and rates in column BM:BN and highlights the cells for me. I need it to highlight in all 7 boxes. I've attached a sample worksheet of what it looks like after I highlight the cells.
Any method for colour highlighting a row (specific number of cells) as and when any cell of that row is selected, and return to normal when deselected.
View 4 Replies View RelatedAny code or formula to highlight the intersected cells between a column and a row for any selected cell ?
Ex: if i select E25 the cells of column E1:E25 as well as the cells of Row A25:E25 to be highlighted in a certain color , and so on for any selected cell..
in this sheet i have 3 groups of data. group 3 is the sum of group 2 - group 1.
how can i make the cells highlight that relate to the cell sum in group 3.
i.e when i click cell b38 cell b21 and b4 should highlight.
Essentially I have inherited a spreadsheet which is crammed full of complex array formulas.
No problem in itself as I understand array formulas pretty well (or so I think!). My problem is that when i want to ammend some of these, i cannot easily see what range I need to highlight in order to edit them i.e. I obviously cant do a single cell as its part of an array. I hope I have made myself clear?
So my question is this.
When the cursor is sat in a cell that is part of an array formula, how can I easily find out ( ideally by the array formula range being highlighted in (say) red ) what cells are included in the array formula?
Would conditional formating do the job?
Have a spreadsheet shows 4000 warehouse locations (location of products). Each cell is a location in the warehouse (ba050, ca809, etc, actual warehouse locations, not grid ref); some products have more than one location, the locations are always next to each other. I import a text file into the workbook which tells me which product has more than one location (2, 10, 50, etc), that’s all I’m interested in ( multiple locations).
What I’ve done so far is to use vlookup to look at locations in file and allocated the number (the number of locations that product has) next (next column) to the cell that correspond to that location. What I need is a macro or formula that will look at the number and than highlight that many cells up or down the column, according to the number in the cell to the right (5 in cell, highlight 5 cells, 50 highlights 50). The warehouse runs up one aisle and then down the next and so on. So I need to be able to highlight cells up one column and then down the next and then up, then down and so on.
Multiple locations change on a daily bases, so need a quick way of updating 4000 locations.
New to excel don’t know if this is possible or not. Learning as I go.
Need some assistance.
Sample below.
Only interested if a number is returned, “******” can be ignored as will hide all columns expect ones with locations. So:
BA020 returned value of 4, so would like to highlight (any colour) BA020, BA029, BA040, BA049.
BB780 returned value of 2, so would like to highlight BB780, BB789.
POSSIBLE?
BA090 2 BA100 **** BB749 **** BB739 ****
BA079 **** BA089 **** BB760 **** BB750 ****
BA070 **** BA080 **** BB769 **** BB759 ****
BA059 **** BA069 **** BB780 2 BB770 ****
BA050 **** BA060 4 BB789 **** BB779 ****
BA039 **** BA049 **** BB800 **** BB790 ****
BA030 4 BA040 **** BB809 **** BB799 ****
BA019 **** BA029 **** BB820 **** BB810 ****
BA010 **** BA020 4 BB829 **** BB819 ****
I have a large compilation of data on an excel work sheet (I am using 2013). All cells relate to each other by means of dates, names, and other numeric values such as stock numbers, id numbers etc... In one column some stock numbers are repeated. I would like to know if there is a way to set up the program on this worksheet to highlight all repeating stock numbers, not only in the column but across the cells as well, in lieu of doing so manually.
View 1 Replies View RelatedIf C2 = 21/06/14
I need F2 to highlight when 60 days have passed from the date entered in C2.
Would this work if placed in F2 =C2+60<TODAY()
No access to excel at the minute to try it
I am trying to calculate a percentage complete based on what a cells color is, the function must count the cells of a certain color (signifying in this case that something is complete for a particular "area") and distinguish that from cells in the same data range that aren't colored and calculate the percentage that are complete.
View 3 Replies View RelatedI'm having issues with conditional formatting. I used the INDIRECT formula to highlight specific rows.
For example, column A has the days of the week. I wanted the whole row highlighted if it was a Saturday. I used:
=INDIRECT("a"&Row())="Sat"
What I want to do now is to highlight specific cells (Columns F and G) if column A has Friday in it. I do not want the whole row highlighted if it contains Friday.
each month i have to clens a sheet that shows customer name and then the figures per month.
this is pulled from a system that allows for a new entry each time a variation on customer name is used, I.E
Joe Blogs LTD
Joe Blogs Limited
Joe Blogs ltd.
would all come through as new entries. then i have to manually consolidate the figures from each month. the spreadsheet has over 5000 rows, and maybe only 15% are duplicated. what i want is to be able to select the column (that will be sorted a-z) and highlight cells that have a match for the first 4 or 5 charicters.
once i have identified duplicates i then have to merge the data into one row.
is there an easy way to do this? it is monthly, comparing 2008 and 2009, so by december there will be 24 columns + the company name that need to be clensed.
Have been doing some sums on excel. I've managed to calculate the number of months between 2 dates using this formula.....
=DATEDIF(C3,D3,"y")&" years "&DATEDIF(C3,D3,"ym")&" months "
I then come up with a list of months calculated.
What I now want to know is, how many are equal to or more than 9 months? And if this is the case then can the cells be highlighted in a different colour?