I'm use with this macro to Highlight duplicate cells BUT the macro highlight only from the second duplicate
I need to highlight ALL duplicate cells in column A:A .
FUNCTION like " =COUNTIF($A$1:$A$11,A1)>1 " it's not good for me in this case, i need it with a fast macro
I have a large compilation of data on an excel work sheet (I am using 2013). All cells relate to each other by means of dates, names, and other numeric values such as stock numbers, id numbers etc... In one column some stock numbers are repeated. I would like to know if there is a way to set up the program on this worksheet to highlight all repeating stock numbers, not only in the column but across the cells as well, in lieu of doing so manually.
View 1 Replies View RelatedIn Column A, there are about 2000 plus entries, is there a simple formula to highlight the duplicate values in conditional format, so that the duplicate values stand coloured.
View 2 Replies View RelatedI want to write a macro that highlights duplicate values within a single column. I found - on this site a macro that removes duplicate values, which is huge, but sometimes I just need to highlight duplicates values rather than remove them.
View 2 Replies View RelatedAny code or formula to highlight the intersected cells between a column and a row for any selected cell ?
Ex: if i select E25 the cells of column E1:E25 as well as the cells of Row A25:E25 to be highlighted in a certain color , and so on for any selected cell..
I would like to check column B and if any of these values match values in column J hightlight the cell on the same row as the match on column E green. I don't know much about excel but this would be a tremendous help because i'm looking through quite a bit of data. I've tried using conditional formatting and i can't seem to get that to work for my needs. Let me know if you need anymore information.
View 13 Replies View RelatedI need to highlight all the duplicate IP-addresses in my sheet except the first one.
What I did:
I chose the range (F column) -> Conditional formatting -> Highlight cell rules -> Duplicate Values. It highlighted all the duplicate values so i googled how to highlight the duplicate values except the first one so I came across a formula =COUNTIF($F$2:$F2, F2)>1
So I added the formula and now it does not highlight the first duplicate but only the second and not the third and fourth and so on.
What am I doing wrong?
Edit: I have sorted them in order and in one IP-address I have 6 duplicates but it highlights only the last one when I want it to highlight all of them except the first one.
I have a set template for 3 sheets. I copy/paste data into all three sheets within the template. Some data are repeated twice within the 3 sheets. How can I highlight the duplicate data between these sheets?
View 5 Replies View RelatedI have two columns that is use to record last name first name. I need a macro that will find matching names in the columns. i have found some examples for searching one column but have not had any luck finding someway to do 2 columns. in the example below i need it to find and highlight The names Smith John.
View 3 Replies View RelatedI am trying to set up a workbook for work that will highlight duplicates. I know how to use conditional formatting to do this, however, I would like each duplicate "set" to be a different color in order to better identify. The area that I need to search for duplicates is E3:E27. How can this be accomplished?
View 2 Replies View RelatedI have a spreadsheet with thousands rows of items on. I am trying to identify duplicate entries based on two or three cells within each row. If those two or three cells are duplicated for that particular ID then the duplicate entry (row) should be highlighted for deletion.
Better still it would be great if there was a macro or formula which would delete that duplicate row.
So for example on the spreadsheet I have attached, I would like rows 6 and 9 deleted or highlighted as the criteria for deletion is a duplication of the entry in the 'YEAR' column AND the 'VALUE' column for the REFERENCEs AB-1234 and AB-9876 which are the unique identifiers for each individual case.
This would leave the end result as per the table below on the attached spreadsheet.
I would like to know how I can have a macro run on an excel sheet of mine.
I have a little database with a few names and email addresses submitted to me via web.
But some people tried to register to my services TWICE with a different name, but same email address (not smart eh)
I would like to run a macro on a column and have it search for duplicate values and highlight them in... blue perhaps.?
P.s. the column format is set to 'TEXT'
In my worksheet i have several rows that are duplicates and i need to give each row a unique number. For example the first duplicated row needs to be 1 the second 2 etc.
View 7 Replies View RelatedI have 3 columns containing id, item, colour. I want to check for duplicate id's in the id column and where duplicates are found merge the colours into one cell, as follows:
iditemcolour
1245bookred
1245bookorange
1245bookblue
1456chairred
1367chairgreen
1876tablewhite
1876tablebrown
would become
iditemcolour
1245bookred,orange,blue
1456chairred
1367chairgreen
1876tablewhite,brown
What i'm trying to do is i would like to compile in 1 column all duplicate values from multiple cells.
ex. A1 to 10 is numbered 1 to 10 respectively, B1 to B10 is numbered 6 to 15 respectively. which means in A1:B10 the duplicate values are 6,7,8,9,10. i could like these number to show automatically in C1 to C5.
I have many rows of data. How can I find duplicate cells in a column?
View 9 Replies View RelatedI have a huge document that looks like this
Column A______Column B_____Column C
100/12__________B___________$
100/12______________________@
100/12______________________€
250/13______________________€
250/13______________________$
I want to keep in ColumnA all three rows of 100/12, because it has a value in Column B in one cell-which is the criteria, and remove the 250/13 because it has no value in cell B.
I was assuming that merging duplicates in column A, and than remove empty from ColumnB.
I am looking for a macro to look in Sheet 1 column A and compare the values to Sheet 2 column O. When it finds a duplicate I want it to delete the entire row in sheet 1. I dont want to have to manually sort anything if that's possible.
View 3 Replies View RelatedI want to do, is search column A for claim numbers that match. When I do have a matching claim number, I want to concatenate the original cells ownership field with the said matching cells ownership field (or move into a column in the same row, I can always concatenate later). Once that is complete, I want to delete the row I took the information out of.
I want to join this data in ArcGIS, but as of right now, it's not a 1-to-1 relationship, so only a relate works. That doesn't help me as I want to display claims by ownership, and this can vary per claim. Company A may have 100% on one claim, and then split another claim 50% with Company B.
This causes a double entry on the claim field in this current spreadsheet I have, which requires me to clean it up by making multiple columns of ownership vs. an additional row for shared ownership.
My problem:
Column A Column B
1235555 Company A (50%)
1235555 Company B (50%)
1235556 Company A (100%)
1235557 Company A (33%)
1235557 Company B (33%)
1235557 Company C (33%)
What I would like to see
Column A Column B Column C Column D
1235555 Company A (50%) Company B (50%)
1235556 Company A (100%)
1235557 Company A (33%) Company B (33%) Company C (33%)
I found this spreadsheet on here and I have been trying to customize it to what I need. I am trying to have scores from skins match highlighted. I want only the minimum score to be highlighted but if there is another duplicate minimum score I don't want it to highlight anything. I also need to find a way to count the skins won by each player and have it off to the side.
For those not familiar with golf a Skin is a game where you try to get the lowest amount of strokes on a specific hole. Ex- 4 people play the hole one. P1 scores 4, P2 gets a 3, P3 and P4 get 6. The skin would go to P2 who has the lowest score on that hole.
Highlight lowest number in each column not highlighting if there are duplicates starting at L6 down to L11 and for each column till AC. And the same for the group just to the right on attached file.
On row 13 and 14 it tells me who won a skin. I want to tally up the total skins won by each player. so if Joe's names shows up twice on R14 I want it to tell me somewhere in the sheet Joe = 2
I have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.
View 3 Replies View RelatedI have a worksheet, the data flows from different columns, like a,b,c and the result is in d column. The entries are spread from 1 to 45 rows. The format of data is five digit number. As I have formatted the cells as "custom" like "00000", the Zero is shown on left side, but when the column is copied/pasted in another column in certain entries zero disappears. Is there any way to get the 4 digit entries, highlighted, so Zero can be added on left side manually directly to the concerned entries, instead of checking each and every entry.
View 4 Replies View Relatedi am trying to get a VBA to find the value 'TRCO' select the row and highlight the row in red, i have tried the way below but i get an error saying 'type mismatch'.
If Range("b7", "b51166").Value = "TRCO" Then
Rows.Select
Selection.Font.ColorIndex = 3
End If
On the attached sheet I am trying to indicate that enough data has been entered by highlighting the entire column. Any 3 cells in Rows 7-13 and 18-36 will be filled in with any of the values from cells O6-O11 (hidden). When the total = 6 i would like to highlight the entire column to indicate it has been completed.
The aim is two fold: to ensure that the correct number of points is allocated in each race, and secondly to indicate which column is the next to be filled in (as human error sometimes misses the column and adds the points to either the previous or next columns). You could call it idiot proofing the sheet. At present i have the cells in Row 37 conditional formatted to show this, but would much prefer the entire column to highlight.
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
I am looking for a way to have the active cell row and column (standout). I did have it highlight but as users tried to highlight certain cells the active highlighting of the rows and columns would erase the color. So they are asking for something that can take its place with an on and off button to it.
View 5 Replies View RelatedI need to highlight a cell when its value exceeds parameters based on the production line it comes from. If the line is K11, then i need this cell to highlight when its value is either < 0 or greater than 221. If the line is K21, than it needs to highlight when its value is <0 or greater than 474.
I have a query relating to conditional highlighting - specifically highlighting a cell's column and row based upon whether it contains data or not i.e. if it is blank, it's column and row remain unhighlighted, but when it contains data, it's column and row should become highlighted. I could probably manage this myself but I have a few more specific requirements which I have illustrated with a few screenshots, however I can't see how to make these available to view here!I
View 1 Replies View RelatedI am running Excel for Mac V2008.
My spreadsheet has various columns with column A representing dates of a 6 month period formatted as: ddd d-mmm-yy, one day per cell.
I want to highlight the cells which are Saturdays and Sundays and are not working days for my Plant.
I think it may be done using conditional formatting, but I have been unable to discover the right formula which would allow this to happen.