I am a new to VBA. I want to add a range of numbers to another range of numbers. However second range should always add to itself with first corresponding array values. For example my firsr array is A1:F10 and second array is A15:F25. Now i want A15 = A15+A1, A16= A16+A2, A17= A17+A3 and so on. Every time second array should retain itself value and get added with first corresponding array values.
View 5 Replies
I have a set of data like below, I am trying to get a formula to look at a range i.e. May column and then select the highest number in that range but rather than returning the number returning the team name, is that possible? Not sure where to start...
Jan
Feb
Mar
Apr
May
Jun
Team 1
25087
23029
32991
21319
25271
25136.8
[Code] .........
I need a formula to check a range of parts and bring back a value of 0 if matched or the value in another cell if it doesn't match.
Part number H-200-3
Part number H-200-3-A
Part number H-200-3-B
If I enter any of the above part numbers then cell B1 returns 0 if it is a different part number then B1 would need to match cell A1.
My excel (2003) is stuck in array mode - is there any way to get it out of Array Mode and put it back in the letter:number display for formulas/functions? It's doing this in VBA too which is totally killing me.
View 2 Replies View RelatedI have to macros I'm working with the first take a user set range and prints the . Address to a cell.
The second Macro I'm trying to get to look at that cell and pull out the range. So is there an opposite fuction to .
Address that will convert excel format to a VBA Range format. Ex A cell with $A$1:$A$2 to Range("A1",A2")
Macro 1
Code:
For j = 1 To x
c = 1
For i = 1 To ws.Range("AD" & rc).Value
ws.Range("AE" & rc).Value = Application.InputBox
(Prompt:="What is the Heading of Data set #" & c & " Table " & tc & " This entry may repeat", Type:=8)
[Code] .........
Macro 2
Code:
'A lot of code here but I want to be able to set multiple ranges to the ranges list in the cell values.
rng(2) = sh(0).Range("AG2").Value
I have a layout something like the following:
A1
A2
A3
[Code]....
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
A1
A2
A3
B1
[Code].....
For example
Name Address Phone # zip
Danielle 4561
Danielle 9852
Danielle 22
Danielle 69
Joe 895
Joe 28
John 9821
John 1114
John 698
Say I did a search for Joe. I want to report back all the addresses in which he resided but there's no way to tell how many rows of data each person has. Joe has 2 rows, Danielle has 4 rows and John has three. How do I report back all the relevant rows?
I am doing a spread sheet for participation in a class. What I want is for whenever a student is absent, i.e. has a 0 in their point box for the day, that cell turns red. I have tried to make the .find method work but it has been uncooperative and so far and I can't seem to get it to even run. This is what I have so far:
HTML Code:
Private Sub For_Loop_Click()
Set v = .Find(0, LookIn:=xlValues)
For Each v In [B6:B46]
Do
If v.Value = 0 Then v.Interior.ColorIndext = 3
Set c = .FindNext(c)
End If
End With
End Sub
I call a userform (modeless), and then i'm trying to set the focus back on the range that was selected when i showed the userform. you would think i could just define the range and then use rnge.select like this....
set prevrnge = selection
UF.show (vbmodeless)
prevrnge.select
but it doesn't take the focus off the userform....
Median Indirect: I would like to find the median in a range of cells and then bring back the 2 adjacent cells
Range...............Adj Cell 1............Adj Cell 2
1.......................L1......................L2
2.......................P3......................P4
3.......................O9......................010
So the median of the range is 2, thus we would want the formulas to bring back P3 and p4
Column 1..............Column 2
P3...........................P4
i had to change the color of cell to yellow if the cell content is "N/A"
i had write few lines but don't know how to move in a range cell by cell
I want to know how to copy a range into an array then an array back into an range.
Code:
Dim a(3,3) As Double
a(3,3) = Range("C3:E5")
Range("C10:E12") = a(3,3)
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
Excel 2007
ABCDE12145101843222121028543291410388563015104796731501058178325210
685894953107839104354108841011445510985111349661101215516710013135668
981417576999151858708916195971801720607291182161738219236274902024637
59121276476872228657786232425Sheet1
Designated Cell = 7
1 10 .034
15 25 .072
35 45 .089
Output Cell = ???
I am trying to find a formula for the output cell. Suppose the designated cell = 7 due to formulas above it. So that number is always given but can change. I then need a formula for the ouput cell that says if the designated cell is greater than or equal to 1, and less than 10, then the output cell should equal .034. So suppose the designated cell = 18.2. Then I would want the output cell to be .072 since it is greater than or equal to 15, and less than 25. The template I am using has 23 rows of numbers like above. I didn't know how to do it for 23 rows though. If/Then doesn't work because it is 23 statements long (well over the seven limit) and the vlookup only works when the cell is equal to a number and not a range.
I would like to count the number of occurence of a user given number in a range through VBA code. Have attached a sample with this.
View 2 Replies View RelatedAll data is located within one book. I have two sheets with material codes in each sheet which include pricing (existing and current)
Sheet1 (has existing material codes plus existing pricing) Has about 1200 lines
Sheet2 (has current material codes plus current pricing), has about 36000 lines
I need to cross check if the material code (taken from sheet1) are still available in sheet2, and if they are, copy the current price back to sheet1. The current price needs to be pasted back into sheet1 (next to the existing price). If the material code doesn't exist (for whatever reason, in sheet2), the program needs to move onto the next line and leave the current price for that material code blank. The program should finish once all the lines in sheet1 are completed. I have attached a sample of what I'm trying to do,
I have a column of dates in Col H with associated values in Col I. I need to specify a date range in Cell I1 and I2 such that the row number for the first encounter of the first date is placed in Cell I3 and the last encounter of the end date is placed in Cell I4. For example, with this data when I specificy 4/2/13 and 4/3/13, I would like to get a 19 in Cell I3 and a 53 in Cell I4.
Matty supplied the formula in Col K for each of these cells. They worked well in the application that I supplied earlier (different locations for these variables), but my real application is as shown here, and these two formula give the incorrect results shown. Both of these formula are arrays.
Excel 2010HIJK14/2/201324/3/2013310=MATCH(I1,INT(H10:H5000),0)+1444=MATCH(2,1/(INT(H11:H5000)=I2),1)+1536789X10 114/1/13 1:366.97124/1/13 2:04134/1/13 2:04144/1/13 4:563.95154/1/13 4:573.27164/1/13 5:165.55174/1/13 5:172.35184/1/13 10:30194/2/13 14:00204/2/13 14:59214/2/13 15:01224/2/13 17:192.81234/2/13 17:191.59244/2/13 17:252.14254/2/13 17:262.05264/2/13 21:07274/2/13 21:07284/2/13 21:11294/2/13 21:11304/3/13 1:38314/3/13 1:38324/3/13 2:10334/3/13 2:10344/3/13 4:24354/3/13 5:152.84364/3/13 5:154.11374/3/13 5:173.45384/3/13 5:173.24394/3/13 9:35404/3/13 9:35414/3/13 9:59424/3/13 10:01434/3/13 13:36444/3/13 13:37454/3/13 13:41464/3/13 13:42474/3/13 17:124.03484/3/13 17:133.62494/3/13 17:15504/3/13 17:15514/3/13 21:12524/3/13 21:13534/3/13 22:214.41544/4/13 1:52554/4/13 1:52564/4/13 1:53574/4/13 1:53Ppk Raw Data (2)
I have a range of values in column A, I wish to add all numbers by all other numbers, i.e for a specific value in the range, I want to add it to all the other values in the range, and output the values in a new range.
For example for values 1,2,3,4 in range A2:A5, I want to output a new range the values;
1+2 =3
1+3 =4
1+4 =5
2+1 =3
2+3 =5
2+4 =6
e.t.c, beginning in range B2. No number can be added to itself.
attached sheet. Basically I want to say what a great job you all do here. I was wondering if anyone can help me. I need to write a formula that looks for example 11630,11635,11640,11647,11750 in column A and then adds all the value in column B that meet the first number requirement. So really if the column A meeting the first condition add the value next to it and then continue the rest of the numbers and add them all together.
I have tried using Sumif but I can only do up to 18 conditions in column A.
I have a spreadsheet with some scripting that automatically emails the report to whoever is on the sheet. I'm not sure what kind of scripting it is. I think my boss found it somewhere.
Whenever I scroll either down or up, the first 3 rows disappear and I'm not able to scroll back up. The scrollbar shows that I'm not at the top, but it won't let me go back up. The first 3 rows contain the button to send the email. If I close out without saving and open it again, its fine, until I scroll up or down.
Copying information from various sheets from one workbook to paste into similar sheets in another workbook? It would involve switching back and forth between workbooks.
I found a way (on this board) to spell out numbers...I.E.: 140 = "One Hundred Forty" .
But is there a way to convert "One Hundred Forty" to 140 and format as a number or general or pretty much anything but text? I thought would be as easy as Cell Format > Number
Back Draws! ...
View 9 Replies View RelatedI have a spreadsheet with over 20,000 rows. From another spreadsheet I need to find if any of a list of 90 customers are within the first, using a simple IF and vlookup formula which comes back yes or no.
I am using: =IF(A2 = VLOOKUP(A2,ihcust!B:B,1),"YES","NO")
However, although this works when they are spelt exact in both sheets if they are not it will say no.
eg. If I was Looking up "Joe's Icecreams" from the list of 90 but in the other sheet it is listed as "Joe's Icecreams (admin)" it would not recognise it and come back no.
Is there away to get around this problem
I am trying to create an IF formula so when i try to get the percentage change if lets say the 2008 number was 0 and the 2009 number increased by 9 than i would get an error so i want the if formula to come back as n/a.
View 5 Replies View RelatedI'm setting up a payroll for several employees in one workbook. I start from the particular employee's worksheet and then I need to go to another sheet where various information is stored and then come back to the original employee's sheet. The current macro works fine if the various information is stored on each employee's worksheet but I can't figure out how to go to another sheet and then come back to my active cell in employee sheet.
[Code] .....
I am currently using this code which automatically saves a back up copy to another location on my system.
However, the only way i can get it to work is to assign it to a command button. Is there any way in which this will work once i just click the save button.
I am currently using this method to create a back-up of the current workbook to another location using a yes/no message box.
If the user clicks no, the workbook will be closed...also if they have not saved any changed data excel also gives them this option in case they close by mistake.
Its the yes option i am having issues with.
If they click yes...the back-up code runs fine and saves the file elsewhere...but for some reason the code loops and runs again. Not sure why this is happening but i do not want it to. Also again if there is any unsaved changes...excel does not give them the option to save this first...i would like this happen.
I want to write a formula that counts back a given no. of columns and averages those cells.
Example:
cell P4 - 4 = cell L4
AVERAGE cell P4 to cell L4
To obtain the number of cells I am going to look back I will be using a VLOOKUP... So that number will be open to change.
