IF And Vlookup Functions Which Comes Back Yes Or No.
Sep 20, 2007
I have a spreadsheet with over 20,000 rows. From another spreadsheet I need to find if any of a list of 90 customers are within the first, using a simple IF and vlookup formula which comes back yes or no.
I am using: =IF(A2 = VLOOKUP(A2,ihcust!B:B,1),"YES","NO")
However, although this works when they are spelt exact in both sheets if they are not it will say no.
eg. If I was Looking up "Joe's Icecreams" from the list of 90 but in the other sheet it is listed as "Joe's Icecreams (admin)" it would not recognise it and come back no.
Is there away to get around this problem
View 9 Replies
ADVERTISEMENT
Sep 25, 2009
My excel (2003) is stuck in array mode - is there any way to get it out of Array Mode and put it back in the letter:number display for formulas/functions? It's doing this in VBA too which is totally killing me.
View 2 Replies
View Related
Jun 12, 2014
I have a VLOOKUP that needs to bring back the sum of all entries that meet the criteria. At the moment it is only bringing back the first entry.
View 3 Replies
View Related
May 23, 2014
I have a situation where I have about 20000 lines to populate and looking for a quicker alternative. I have duplicate numerical values in the lookup_value. I want the same number to appear for all lookup_value's but there is only one instance of that value on the other sheet I am searching. My table looks like this:
lookup_value
50058459
50058459
50058459
50058459
68594523
68594523
68594523
58965214
Table_array
Column A Column B
50058459 1234
68594523 9876
58965214 3456
I want my output of vlookup to look like this
Column A Column B
50058459 1234
50058459 1234
50058459 1234
50058459 1234
68594523 9876
68594523 9876
68594523 9876
58965214 3456
View 7 Replies
View Related
Aug 25, 2007
I'm trying to write a macro that looks up Column A so that each time it finds "Agent" as the first word in a cell, it takes that whole cell and copies it to another sheet.
I tried creating an array function that combines the If, Vlookup, and Right() and Left() functions, but no luck. Ideally, I would want this as a VBA macro.
View 9 Replies
View Related
Sep 30, 2009
IN NEED HELP WITH vlookup FUNCTIONS:
1-st table
ABCDEF12221.985
2-nd table
>40
0.1
40
View 9 Replies
View Related
Nov 27, 2009
need a mix of the vlookup and sumifs functions! (well I think at least!)
I want to find Cell A in Column 1 AND Cell B in Column 2 (like a sumifs) and then return me a value in a range (as a normal vlookup would)
Basically a vlookup matching two cells/columns rather than one
View 9 Replies
View Related
May 1, 2007
I have made an input form which the user can input the data of person they wish to sit.
I then used Vlookup to put this data on to a smaller table.
This will make more sense on this download of the program.
http://files-upload.com/199899/MainInput.xls.html
What my problem is....is that i have too rooms and i needed excel too look at the cell see that they want to sit in room one then it looks at what table they want to sit at then looks at the seat they want to sit at then put them there.
View 9 Replies
View Related
Apr 7, 2014
In sheet1 I have name(column A) and value(column B)
In sheet2 I have name (column C) and key(column D)
In sheet 3 I have results
Example ( It is just a total nonsense example, the real data is net inflow of some funds that are unique)
Sheet1
House 1000
Car 1500
pet 2000
Sheet 2
house1
car1
pet2
So in the sheet 3 I want to put a formula that is capable to sum all values of the sheet2 if the name has a key of 1in the sheet2, the key columns has values of 1 or 2
I think in SQL will be something with join and group by with having clause.
The result will be 2500 in the sheet 3.
What I tried: My attempt is to do something like this code ( using array functions).
View 7 Replies
View Related
Jul 13, 2006
I have drop down fields using a vlookup to grab the corresponding data in a colums next it which is being concatenated into a one big cell. The problem is a set of other columns that I need to pull data from but its dependant to a previous column. In the attachment you see which ever region is selected the following column data is grabbed and the same goe for title. Now when the location is selected the info in its column should be selected that corresponds to the row that the specific title is on. example
if selected: North America>Secretary>Texas
results: A Crazy Mix->;typical,Notepad, pen,square dance
View 7 Replies
View Related
Jul 18, 2007
I am trying to obtain price of an item using vlookup() function on the identifier “0003128” (7 digits) stored with “custom” format “0000000” in one worksheet. However in other worksheet, the identifier is stored as “000312” (6 digits) with “text” format without the last digit ‘8’. I tried using the left(A,6) function on “0003128” but instead of returning “000312” it returns “3128” and I’m unable to use the vlookup() function.
View 6 Replies
View Related
Jul 27, 2007
I have 2 spreadsheets. One is a promotion calendar that lists the dates that promotions on a certain product runs. The other is a shipment grid of shipments of that product to the customer.
I want VLookup to find the customer and the dates and then bring me back an asterisk in a separate column to show me that that certain week that product was delivered was a promotion week. The problem I have is using Vlookup to lookup 2 things at once (and if they match to the promotion calendar) and return me an asterisk.
Here is my formula now:
=IF(VLOOKUP(J2&" "&L2,'East Data'!M:AU,2,FALSE),"*",0)
J2 is the customer name
L2 is the week
"East Data" is the spreadsheet with all of the promotions and customers.
View 9 Replies
View Related
Oct 2, 2008
XL 2003
I want to combine these three functions
=VLOOKUP(e4,AGTNAME!$A$1:$E$3086,5,0)
=LEFT(E4,FIND("/",E4)-1)
and iserror
View 9 Replies
View Related
Aug 3, 2009
I need a formula that will bring up the Model type of a product based on its Material code. All the models I need to generate have a "root" number in them (the first 6 digits define model type). This is what I need to fill out:
View 2 Replies
View Related
Aug 11, 2012
I have a layout something like the following:
A1
A2
A3
[Code]....
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
A1
A2
A3
B1
[Code].....
View 4 Replies
View Related
Mar 14, 2008
I am aware of the following topic in the VBA Help file:
"Using Microsoft Excel Worksheet Functions in Visual Basic
You can use most Microsoft Excel worksheet functions in your Visual Basic statements. To see a list of the worksheet functions you can use, see List of Worksheet Functions Available to Visual Basic.
Note Some worksheet functions aren’t useful in Visual Basic. For example, the Concatenate function isn’t needed because in Visual Basic you can use the & operator to join multiple text values."
And I'm aware of how to call Excel funcitons from within VBA; e.g., answer = Application.WorksheetFunction.Min(myRange)
However, not only are some Excel functions not useful; the fact is they cannot be used because VBA has a native function that does exactly the same thing and you have to use that native VBA function to achieve your goal. It is these overlapping functions that I am especially interested in. I want to know what I should use directly in VBA and what I need to go to Excel for.
View 9 Replies
View Related
Jul 24, 2006
All data is located within one book. I have two sheets with material codes in each sheet which include pricing (existing and current)
Sheet1 (has existing material codes plus existing pricing) Has about 1200 lines
Sheet2 (has current material codes plus current pricing), has about 36000 lines
I need to cross check if the material code (taken from sheet1) are still available in sheet2, and if they are, copy the current price back to sheet1. The current price needs to be pasted back into sheet1 (next to the existing price). If the material code doesn't exist (for whatever reason, in sheet2), the program needs to move onto the next line and leave the current price for that material code blank. The program should finish once all the lines in sheet1 are completed. I have attached a sample of what I'm trying to do,
View 7 Replies
View Related
Dec 26, 2008
I have a spreadsheet with some scripting that automatically emails the report to whoever is on the sheet. I'm not sure what kind of scripting it is. I think my boss found it somewhere.
Whenever I scroll either down or up, the first 3 rows disappear and I'm not able to scroll back up. The scrollbar shows that I'm not at the top, but it won't let me go back up. The first 3 rows contain the button to send the email. If I close out without saving and open it again, its fine, until I scroll up or down.
View 4 Replies
View Related
Feb 2, 2007
Copying information from various sheets from one workbook to paste into similar sheets in another workbook? It would involve switching back and forth between workbooks.
View 9 Replies
View Related
Sep 26, 2008
I found a way (on this board) to spell out numbers...I.E.: 140 = "One Hundred Forty" .
But is there a way to convert "One Hundred Forty" to 140 and format as a number or general or pretty much anything but text? I thought would be as easy as Cell Format > Number
View 9 Replies
View Related
Dec 3, 2008
Back Draws! ...
View 9 Replies
View Related
Nov 2, 2009
I am trying to create an IF formula so when i try to get the percentage change if lets say the 2008 number was 0 and the 2009 number increased by 9 than i would get an error so i want the if formula to come back as n/a.
View 5 Replies
View Related
Aug 21, 2014
I'm setting up a payroll for several employees in one workbook. I start from the particular employee's worksheet and then I need to go to another sheet where various information is stored and then come back to the original employee's sheet. The current macro works fine if the various information is stored on each employee's worksheet but I can't figure out how to go to another sheet and then come back to my active cell in employee sheet.
[Code] .....
View 14 Replies
View Related
Jul 2, 2009
I am currently using this code which automatically saves a back up copy to another location on my system.
However, the only way i can get it to work is to assign it to a command button. Is there any way in which this will work once i just click the save button.
View 4 Replies
View Related
Dec 7, 2009
I am currently using this method to create a back-up of the current workbook to another location using a yes/no message box.
If the user clicks no, the workbook will be closed...also if they have not saved any changed data excel also gives them this option in case they close by mistake.
Its the yes option i am having issues with.
If they click yes...the back-up code runs fine and saves the file elsewhere...but for some reason the code loops and runs again. Not sure why this is happening but i do not want it to. Also again if there is any unsaved changes...excel does not give them the option to save this first...i would like this happen.
View 3 Replies
View Related
Aug 18, 2008
I want to write a formula that counts back a given no. of columns and averages those cells.
Example:
cell P4 - 4 = cell L4
AVERAGE cell P4 to cell L4
To obtain the number of cells I am going to look back I will be using a VLOOKUP... So that number will be open to change.
View 10 Replies
View Related
Jan 1, 2010
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1)
I have this formula in Column L. The calculations are working fine and I close the file. After I email the workbook from one computer to another and then resave it, every row in Column L that has the formula turns to #NAME?
Do you know why this is happening?
View 12 Replies
View Related
Jun 23, 2012
Once I reach Column G and I press enter, instead of going to Col I, How can I get Excel to back back to Col A, but on the next row?
View 5 Replies
View Related
Jul 24, 2012
Column A disappeared and didn't come back. I even arrow over to the left margin, but the furthest it goes is to column B. How can I get my column A back?
View 5 Replies
View Related
Nov 14, 2013
I have made a sheet with 10 input boxes, some for text and some for numbers. If you make a mistake now you must click though the rest of the questions to start again and make a change. Is there a way to add a back button that would take you to the last question? Or possibly make the cancel button stop all questions? Here is a sample of the code
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim strname As String
If Target.Address = Range("k11").Address Then
[Code].....
View 2 Replies
View Related
