I have to macros I'm working with the first take a user set range and prints the . Address to a cell.
The second Macro I'm trying to get to look at that cell and pull out the range. So is there an opposite fuction to .
Address that will convert excel format to a VBA Range format. Ex A cell with $A$1:$A$2 to Range("A1",A2")
Macro 1
Code:
For j = 1 To x
c = 1
For i = 1 To ws.Range("AD" & rc).Value
ws.Range("AE" & rc).Value = Application.InputBox
(Prompt:="What is the Heading of Data set #" & c & " Table " & tc & " This entry may repeat", Type:=8)
[Code] .........
Macro 2
Code:
'A lot of code here but I want to be able to set multiple ranges to the ranges list in the cell values.
rng(2) = sh(0).Range("AG2").Value
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code: For Each c In Range("Q2:AC2").Cells If c = period Then c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
I have a variable which contains the column number. How do I then reference a range in VBA using that column number, as opposed to the letter? I know how to convert the number into the letter, but I also know there has to be something more simpler. For instance, a form of the ADDRESS function, but in VBA?
I want to define the range from a given cell and all data below within the same column strDataStart is the named cell in the worksheet that want to start from. Below is what I tried and failed.
Function rngDataCol(strDataStart As String) As Range Dim rngDataEnd As Range rngDataEnd = Range("strDataStart").End(xlDown) rngDataCol = Range(Range("strDataStart").Address, rngDataEnd.Address) End Function
I've set up a macro to create around 50 http links (sites which i need to monitor every week but whose addresses change slightly every month)
I've also got a macro to open up all these web pages at once so I can look at them in internet explorer.
When these links are nicely created into cells the http link isn't recognised straight away by excel (e.g. doesn't go blue & underlined) until i click in the cell & change or return the cell value - as part of the autocorrect function i think.
Is there a way of getting excel to automatically recognise the http links without having to go individually into every cell.
construct a formula that finds a value in a range , then returns the cell address of that value.
Say, i wanted to find the amount 12385 from another sheet , range C2:AA12 (contains only numbers , no duplicates). result should give me the address of that value.
I have tried the address & match function but gives me an N/A error.
Retrieving the address of the last cell before the FIRST blank in a range.
OK, I have searched the web through six different search engines and explored too many dead end solutions to this problem that I am nearly ready to just scrap the whole sheet.
The problem is very simple.
I need to return the address of the last cell that contains data before the FIRST blank cell.
Heck, I don’t even need to have the address, I can just index the position.
Problem is this question has been posted on nearly every excel help forum from here to pokipsy. Unfortunately EVERY solution I have seen fails the “FIRST blank” requirement.
I have a column of data that never has blanks until the end of the data. I need to know what that cell address is in order to identify a range.
This data has a table above it and below it so none of the “dynamic range” or “Dynamic range name” solutions will work.
How do you get that address without the function continuing to the last blank cell?
I have a named range BGl (G1:R1). I would like to see if a cell address ($U$6) is within the columns of that range. I need a function to give me a true or false based on changing cell addresses.
when I use the range.find function to find a certain value in a column.. i want to return the address of the cell.. and save it in a range variable. how would I do that?
so this is what i have now.. but Rng does not return as a range.. it returns 69... when i use ctrl + G and type ?rng
set rng = .range(A:A).find(what:=69, After:=.Cells(1, 1), Searchorder:=xlByRows, searchdirection:=xlPrevious) ok so say it picks up..... cell A69... how do i get it to save range A69
I have a list of ID's on one sheet that are also located in a large matrix on another sheet.
This macro uses the Find_Range function to find each ID within the matrix and return the column header where the ID was first located. There is also a line which return a list of ranges, indicating all the places where the ID was found.
What I want is to convert the list of ranges into a list of corresponding column headers (ie row 1 of all columns in the range)
' Number of id's in list RowCnt = Application.WorksheetFunction. CountA(Columns("A"))
For I = 2 To RowCnt
LookFor = Sheets("ID List").Range("A" & I) Set InRng = Sheets("Matrix").Cells Set Found = Find_Range(LookFor, InRng, xlValues, xlWhole) On Error Resume Next ' If value is not found Sheets("RateID Count").Range("C" & I) = Sheets("Matrix") _ .Cells(1, Range(Found.Address).Column) ' Return column header Sheets("ID List").Range("D" & I) = Found.Address(False, False) ' Return cell address or range of addresses On Error Goto 0
I am trying to create an XY scatter plot with multiple series. Normally, one has to manually type in or mouse-drag a range for each x series and y series. Instead I would like to build these two ranges (x and y) with text functions and place them in a cell.
For example:
A1: 'data'!$C$3:$C$10 B1: 'data'!$D$3:$D$10
Then, when I create a chart, instead of mouse-dragging, for the x-series, I'll indicate the range that's specified within Cell A1, and for the y series, that which is in B1. I would then repeat this for each series. The reason I want to do this is because I have dozens of series and dozens of graphs and it is relatively easy to programatically identify the range boundaries, but long and tedious to mouse drag them.
I have a sheet with multiple tabs - 1 per employee. I'm trying to run an index on a select tab based on the contents of a cell in order to do a summary across all employees/tabs.
The person's name is Tulley and is listed on the summary page in cell A11. =INDEX(TULLEY!$B$4:$M$5,1,$B11) returns the correct value. I would like to replace the tab reference with the name of the person concatenated with an exclamation point. This yields TULLEY! -
INDIRECT("A11")&"!". I thought that I would be able to replace the TULLEY! in the index formula with the indirect formula. This formula returns TULLEY!, but the index function doesn't work: =INDEX(INDIRECT("A11")&"!"&$B$4:$M$5,1,$B11).
If i lookup a value in the range A1:A12, say Sep-12, i need to get the cell address instead of the value of the row. but i know how to get cell address using CELL function. but i need to get cell address when i lookup the value.because lookup value will be dynamic.
I am setting a variable to the value of an absolute cell reference. I want to set the value of another variable to just the row value of that absolute cell reference.
I am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I am a new to VBA. I want to add a range of numbers to another range of numbers. However second range should always add to itself with first corresponding array values. For example my firsr array is A1:F10 and second array is A15:F25. Now i want A15 = A15+A1, A16= A16+A2, A17= A17+A3 and so on. Every time second array should retain itself value and get added with first corresponding array values.
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A Row2 56 Row3 44 Row4 65
AllData is a named range that refers to the range A2:A65536 AllData_UsedRange refers to A2:A4 by way of this formula. =OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work... ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
I am doing a spread sheet for participation in a class. What I want is for whenever a student is absent, i.e. has a 0 in their point box for the day, that cell turns red. I have tried to make the .find method work but it has been uncooperative and so far and I can't seem to get it to even run. This is what I have so far:
HTML Code:Â
Private Sub For_Loop_Click() Set v = .Find(0, LookIn:=xlValues) For Each v In [B6:B46] Do If v.Value = 0 Then v.Interior.ColorIndext = 3 Set c = .FindNext(c)
I call a userform (modeless), and then i'm trying to set the focus back on the range that was selected when i showed the userform. you would think i could just define the range and then use rnge.select like this....
set prevrnge = selection
UF.show (vbmodeless)
prevrnge.select
but it doesn't take the focus off the userform....
I have a set of data like below, I am trying to get a formula to look at a range i.e. May column and then select the highest number in that range but rather than returning the number returning the team name, is that possible? Not sure where to start...
