How To Control Many Loops Directly After Each Other
Aug 7, 2012
How I can control many loops directly after each other. For example I have this script:
If (Cells(x, column) > 35 And Cells(r, column) < 25 Then
If (cells(x, 75) = "GotU") Then
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Else
If (cells(x, 85) = "GotYah") Then
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Else
If (cells(x, 95) = "GotYou") Then
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
End if
Is this script correct if I want the loops to check all data that I write (for ex. GotYou, GotYah etc.) or do I need to end every if before next if? I want that the loops makes all 3 controls.
View 9 Replies
ADVERTISEMENT
Mar 4, 2014
Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
View 11 Replies
View Related
Jan 9, 2009
I was wondering if it's possible to unhide a row directly below one that is visible?
I am creating a template for users that allows them to choose which lines (rows) they would like to use. They then hit a button to hide all the other lines they don't wish to use.
For each row that is visible I then need the row directly below it to become visible so that the user can enter associated information.
I'm stumped on how to do it. I have the user entering "a" in column A for any row they wish to keep - but I'm not sure how to incorporate this into unhiding the row below (or if I'm on the wrong track with my thinking).
View 5 Replies
View Related
Apr 13, 2007
how can i make a loop throught the G colum and to check if the cell before the currect is bigger/ lower or equal to the currect cell. and if its higher then an arrow will be shown '^' if its lower an upside down arrow will be show 'v'
equal will show -> arrow. example:
G2 = 200
G3 = ^ 300
G4 = -> 300
G5 = v 209
so how can i change the G3 to G4 G5 etc.. in a loop in the: Range("G3").Select command? and i need to change the
.Value = "=$G$2"
to
Value = "=$G$3"
Value = "=$G$4"
etc...
in 2 places................
View 4 Replies
View Related
Jan 9, 2008
Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?
View 9 Replies
View Related
May 16, 2014
I've been working with this script to import and paste a webpage to a worksheet. Once the webpage is on a worksheet I can pull it into VBA easily enough but I was wondering if there's a way to "paste" the webpage directly into an array in VBA and skip the paste to worksheet step?
Code:
Set IE = CreateObject("InternetExplorer.Application")
With IE
.Navigate theURL
IE.Visible = False
End With
[Code]....
View 4 Replies
View Related
Mar 12, 2008
I have a validation box that has 371 names it using the full range of the alphabet.
Is there away within the validation box that instead of using the scroll bar that you can insert a letter or letters to take you to the name directly?
View 9 Replies
View Related
Jun 15, 2006
I have developed an extensive program running on excell but with the user only seeing userforms. I would now like to build in a "print screen" button, but have no idea how to do this.
What it needs to do is capture the userform and all its entries (as it is displayed on the screen) and send this to the printer to be printed as a picture.
I am assuming that there must be code available so that when ever the user clicks this button, the standard windows (or excell) print screen appears from which he will be able to choose the printer etc.
View 3 Replies
View Related
Jul 11, 2006
I have found some code that allows me to email directly from within a workbook, but the example only contains one addressee, I wish to send to 3 or 4 different addresses, these addresses would remain constant once entered. How do I alter the code?
Sub sendactiveworkbook()
ActiveWorkbook.SendMail _
Recipients:="type-in-email-address", _
Subject:="New Quote Raised - Test Transmission " & Format( Date, "dd/mmm/yy")
End Sub
View 3 Replies
View Related
Oct 18, 2008
i have this code that upon opening of workboot it generates the next number thats available on sheet 2 i then enter the data that i need to and click the button it then transfers to sheet2 and prints 2 copies and then clears the cells that i have input data to
what i really need it to do is exactly as it does right now but to then change the next number available to what it is ....
View 14 Replies
View Related
Aug 11, 2009
I seem to be having trouble creating a nested loop. It seemed simple enough in my brain holder, however, in real life...Well I am here aren't I. Here is my
View 2 Replies
View Related
Aug 20, 2009
First of all, I'm completely new to both this forum and VBA. I have just done a programming course in java before. I hope you will forgive me if this have already been posted. No to my problem.
I am tryring to use different projected values to project other subparts of those units, which is done in the sheet mean needed weekly. Tje values are taken from projections. The answer that I get from mean needed weekly should be copied to a third sheet.
This is the code that I am using right know, but I cant get the for loop to work (or more exactly to be able to place the "i" in my text without making compilation errors).
View 9 Replies
View Related
Oct 9, 2009
One of the multitude of areas where I still need drastic improvement is with efficiency. Specifically, avoiding loops.
Are any of you aware of any good, basic level sites, blogs, posts, etc., about better methods or processes? I'm not particularly experienced with programming (I've been a software TESTER for 13 years and just started some programming in recent months), so the more basic the better.
View 2 Replies
View Related
Oct 2, 2008
I have recorded a macro that cleans up my data that I receive from an external source and inserts two columns.
I recorded a seperate macro to execute an "if formula" that evaluates Column A and B and if A is blank return the value in B, else return the value in A. I wrote the formula =if(a1=" ",b1,a1).
I referred to the text I got in the class and found that I can use a "Next Loop". I added to the formating macro the Next Loop critera and instead of inserting text I inserted the above formula.
It ran and returned data, however it was not in the column I intended, it cascaded off to the side of my data in a step down (kinda like stairs).
View 9 Replies
View Related
Nov 3, 2009
I need to maintain a KPI in excel2000 which details weekly progress, I normally do this using some condition formatting and hiding cells, I have to be honest its not pretty.
What I would like to do is to use the colorindex function to show the wk breakdown status and a Do loop on my target range, I think!...... I've a basic example below,
If I could show the benefits to my boss he might even let me take a VBA course.....
View 9 Replies
View Related
Nov 10, 2009
I'm trying to better understand loops and variables. I have an instance I'd like to try and implement but I'm struggling with it. I know how to set a variable as 1 and loop through the code increasing the number each time but this one is a little different.
At the start of my code, I scan the worksheets for the worksheet names -
Monday
Tuesday
Wednesday
etc etc
and then assign these worksheets as
Monday = ws
Tuesday = ws2
Wednesday = ws3
etc etc
That way in my code I can do things to the workbooks like -
ws.Range("D4").Value = "blah blah"
and always know it will be tackling the right worksheet regardless of the sheets position in the workbook or sheetcode.
Well I have lots of changes to make on each of these sheets (Monday -> Sunday) which are identical. What I'd like to do is something like this -
For each VARIABLE in (MY VARIABLES WS,WS2,WS3 ETC)
VARIABLE.Range("D4").Value = "blah blah"
Next VARIABLE
View 9 Replies
View Related
Oct 14, 2006
Is it possible to use a variable to change a controls name in a For Loop? I have several worksheet combo boxes that have the same root name, e.g., cbobox1, cbobox2. cbobox3, etc. I want to be able to keep the main name and change the numeric part in a for loop and also perform some function with the control. For example:
For x = 1 To 10
Worksheets("Name").cbobox(x).Clear
Next x
View 6 Replies
View Related
May 7, 2007
Is it possible to do 2 loops in one procedure? I want to copy and paste formula the cells in one column and again in another column so I did two Do Loops. It only ran for the first loop but not on the second, although they have almost the same code (I just edited the column from C to I). Please see below
Dim RowCount As Integer
Sub Format()
Columns("C:C").Select
Selection.Insert Shift:=x1ToRight
Columns("I:I").Select
Selection.Insert Shift:=x1ToRight
Columns("K:L").Select
Selection.Cut
Columns("R:R").Select
ActiveSheet.Paste
Columns("K:L").Select
Selection.Delete Shift:=x1ToLeft
Columns("L:L").Select
Selection.Insert Shift:=x1ToRight
View 5 Replies
View Related
Feb 2, 2008
I am trying to figure out what a past employee's macros do and how they do it. I would simply like to know what the followin syntax enables you to do:
While ActiveCell <> ""
...
...
Wend
or
While ActiveCell. Offset(5) <> ""
...
...
Wend
View 3 Replies
View Related
Jun 28, 2014
I would like to simply reference this range of cells and change one formatting attribute.
VB: Sheets("flaggedSite report").Range(Cells(RowV, 2), Cells(RowV, 6)).WrapText = True
I get a runtime error 1004 with this???
VB:
With Sheets("FlaggedSite Report").Range(Cells(RowV + 1, 2), Cells(RowV + 1, 5))
'.Range(Cells(RowV, 2), Cells(RowV, 6)).WrapText = True
.WrapText = True
End With
This one runs but gives me unpredicted results. This one I think changes the format on my original sheet vs FlaggedSite Report.
VB:
With Worksheets("FlaggedSite Report")
With Range(Cells(RowV + 1, 2), Cells(RowV + 1, 5))
.WrapText = True
End With
End With
All I want to do is with as small a code as possible make a change to an inactive sheet of my choosing to the wrap format of a range of cells.
View 3 Replies
View Related
Aug 10, 2009
Is there any way to refer to a cell that is directly to the left of the current cell?
I need to create a Comma-Separated Value file with the Excel formula in the CSV file. Because of this, I do not know the current cell location, but want to do something like =(Cell directly to the left of me) + (Cell two cells to the left of me)
View 2 Replies
View Related
Jul 2, 2013
I have an excel file with about 200 images! This increases the filesize too much. So, I want to (if possible) have all the 200 images in different files, but still show all the pictures directly in Excel like before, without having the directly imported into excel. So, easy explained: I want to show a picture directly in excel that is in another file without having the picture increasing the filesize as before! How can i do this??
View 6 Replies
View Related
Nov 7, 2013
Lets say we have prices in column (B) and in column (F) I want to insert a formula that says:
In the same row, look at cell in column (B). If price is between 1000 and 8000 then put 2.00 if price is between 500-999 then put 0.50 if price is between 1-499 then put 0.00
I need to achieve this using something like =OFFSET(INDIRECT(ADDRESS(ROW(), COLUMN())),0,-1) but I am not sure how its done.
I will be using this formula in a find and replace macro. So I can NOT make the typical drag and fill formula.
View 10 Replies
View Related
Jun 18, 2009
I have disabled edit directly in cell in the option menu so that when i double click it goes to source file.
View 3 Replies
View Related
Dec 10, 2009
I want to thank you all for the solutions/support I received in completing my (for me) difficult workbook.
I still have a tricky problem. In the example below, can Multibeep "know" when it is being called from Beep versus being excuted directly? And if so can I direct a different sequence?
View 10 Replies
View Related
Nov 6, 2006
I have a large number of webpages represented by live hyperlinks in a worksheet. I need to save the webpages either as html or prefereably as text files. My current option is to save the worksheet as a html file, open the saved html file in Opera and manually right click and save these webpages to the download folder. This will save the webpage without opening it in a new window or tab.
I would like to write a macro that automatically moves vertically from cell to cell and saves the webpage without opening a browser and requires no user interaction.
I need to know the commands to have the macro read the hyperlink in the cell, got to the website and save it to a location on the local hard drive using a differently numbered filename (file1.txt, file2.txt etc)
There is no problem if a webbrowser needs to open and close as long it is done automatically and controlled by the excel macro.
View 9 Replies
View Related
Jul 6, 2009
I'm having trouble creating a hyperlink that will automatically take a value from a cell and link me directly to a file of the same name across the company server.
For example in column B I have a number along the lines of
43FG2345678
In a folder on the server I have a word document that goes by that exact file. I need to create a hyperlink that looks up that value and searches for that specific document in the location file, and then directly open that file.
The value in column B will change with each line so as I copy the formula/hyperlink down I want it to automatically go in and replace the text and then lookup the file.
I have tried the concatenate function within the hyperlink but not had much luck.
View 2 Replies
View Related
Jan 1, 2012
I have the following code that will go down through column "L", look for the value "ATS", and if found will move it to the right 1 cell. this works find,
My need is to also move the 2 cells directly below the cell containing "ATS", then clear the contents of the "Original" 3 cells before going to find the next instance of "ATS".
Sub Move_Values()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("L4", Range("L5000").End(xlUp))
For Each cell In myrange
If InStr(cell.Value, "ATS") > 0 Then
cell.Offset(0, 1).Value = cell.Value
cell.ClearContents
End If
Next cell
End Sub
View 5 Replies
View Related
Mar 17, 2014
I am playing around with code to extract stock prices from Yahoo! Finance.
The data is extracted from Yahoo in the form of a CSV string, for example:
"HSBC HLDG",596.80,"-0.22%"
I've written code to split the string into cells as I'd like, but just realised that if I copy the above text manually from the Immediate Window (on the back of a Debug.Print) and paste it anywhere on the worksheet Excel automatically splits the string and reformats the values.
Although my code works perfectly I was wondering whether there is a shorter way of doing this, i.e. by just coding up the above action? I've tried a few routes but haven't found a solution yet.
View 1 Replies
View Related
Nov 6, 2006
I have a large number of webpages represented by live hyperlinks in a worksheet. I need to save the webpages either as html or prefereably as text files. My current option is to save the worksheet as a html file, open the saved html file in Opera and manually right click and save these webpages to the download folder. This will save the webpage without opening it in a new window or tab.
I would like to write a macro that automatically moves vertically from cell to cell and saves the webpage without opening a browser and requires no user interaction.
I need to know the commands to have the macro read the hyperlink in the cell, got to the website and save it to a location on the local hard drive using a differently numbered filename (file1.txt, file2.txt etc)
There is no problem if a webbrowser needs to open and close as long it is done automatically and controlled by the excel macro.
View 9 Replies
View Related
