I have the following code that will go down through column "L", look for the value "ATS", and if found will move it to the right 1 cell. this works find,
My need is to also move the 2 cells directly below the cell containing "ATS", then clear the contents of the "Original" 3 cells before going to find the next instance of "ATS".
Sub Move_Values()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("L4", Range("L5000").End(xlUp))
For Each cell In myrange
If InStr(cell.Value, "ATS") > 0 Then
cell.Offset(0, 1).Value = cell.Value
cell.ClearContents
End If
Next cell
End Sub
Can I make the cursor use only 2 columns? In other words, I know that when I scan barcode data into A1, I have the cursor automatically move to B1. BUT, once I've scanned data into B1, how do I make the cursor automatically move to A2?
I am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
I've a sheet that presents the profitability of sales locations in a geographic layout (similar to Tables in a restaurant), each sales location is a cell, with roughly 1,600 locations presented. Each location is colour coded based on performance / measure, in a basic thermographic way [e.g. dark blue for very poor, solid red for high performance] with users being able to change metrics and re-colour cells accordingly.
The sheet is already information rich, but I'm wanting to detect the cell address directly under the pointer and populate a text box or other cell based on the value in the cell directly below the mouse pointer.
My question is; Is there a simple way of detecting the mouse position on the XL Grid? nb. Want to avoid having to activate cell beneath pointer.
Is there any way to refer to a cell that is directly to the left of the current cell?
I need to create a Comma-Separated Value file with the Excel formula in the CSV file. Because of this, I do not know the current cell location, but want to do something like =(Cell directly to the left of me) + (Cell two cells to the left of me)
Lets say we have prices in column (B) and in column (F) I want to insert a formula that says:
In the same row, look at cell in column (B). If price is between 1000 and 8000 then put 2.00 if price is between 500-999 then put 0.50 if price is between 1-499 then put 0.00
I need to achieve this using something like =OFFSET(INDIRECT(ADDRESS(ROW(), COLUMN())),0,-1) but I am not sure how its done.
I will be using this formula in a find and replace macro. So I can NOT make the typical drag and fill formula.
I've populated a temporary worksheet with several columns of data. In this example my Amount Column has several null cells. What I need to do is write a macro to find any nulls and populate the nulls with the data in the last populated cell above it.
Example: the four empty cells below Account (524150) also need to be populated with 524150. The cell immediately below 524200 also needs to be populated with 524200 and the 3 empty cells below 512800 also need to be populated with 512800. Week to week the number of rows will change and the nulls will also change.
I've been trying to figure out how to use a formula that would enable me to copy/copy & move a range of cells right one column if a certain criteria is met.
Basically, if a criteria is met, I want to 'copy' everything from a row to another row, but offset it by one column (so that what was in, let's say, a1 would be in b2).
I've been tinkering with index(), if() and offset() in various combinations but think I must be missing something.
I have come across a format issue I need to deal with it at work.
I have a list of data like this:
A 1234567 8956423 4561237 7531596 8524561
In Column A, I have about 2,000 lines of information. What we want to do at work is create this information to be held in one cell at the top of the excel and in numerical order.
I have 2 col A & F. F col associate with date values & Col A has some color cells.I want to move down those color cells to a selected non-color cell row when run a macro.
I have code which perform to move color cells down to selected cell but problem is, if i have A4 & A6 color cells and i selected F2 cell & run macro then color cell A4 & A6 move down to cell A2 but cell A3 move to place A6. The sequence is
A1A2A4A6A5A3A7A8 & so on but i want cell A3 just push down the order & sequence will be
A1A2A4A6A3A5A7A8 & so on My code is as
Code: Public Sub Move_colored_cells_rows() ' Instead of moving the entire row , 10 columns will be moved Const NUMBER_OF_COLUMNS = 10
I would like to move the data in one column up by 1/2 a row without moving the other columns/rows in the spreadsheet
Here is an example I made quickly in Photoshop - the above image is what I currently have in Excel, and the lower image is what I would like to achieve, with the column shift that I would like circled in red
(the empty space under the column heading is just an artifact from the edit, it doesn't have to be there)
I have a cell comment on a series of columns and want to show only one column at a time. For this reason I hide the ones not used, but the cellcomment doesnt move and is still at the original place. How I move the comment when the original colums between are hidden ?
I have an excel file that contains data from bank transactions.
In column A at irregular intervals is a cell with " User Group:" It depends on how many transactions there are in a batch, could be 1 or up to say 200 as to when the next "User Group" cell is found.
After that also in column A is "Item" then "Lodgement Ref" then at the end "Batch Totals"
i.e. User Group: Item Lodgement Ref Batch Totals: User Group: Item Lodgement Ref Lodgement Ref Lodgement Ref Batch Totals:
I want to find each instance of "Item" then move that cell and every cell over to column CK down to and including "Batch Totals" i.e. A3401 to CK3410 to CM 3400 so it lines up with the top of the transaction block.
There are over 60,000 lines so it's worth trying to find a solution as I can then use the methodology to make other refinements in the spreadsheet.
I have attached the sample file where I have noted what I want as a comment. I need to check for the value " Function Name: RF Pick" if this is there then the code should move 2 rows down check whether that row has the value " Each" if its there just move one row down and move the cells as I need in the output.
I need to create a long series of checkboxes in which each box is linked to the cell directly to the right of it. When I try to copy and past the checkbox, the link doesn't update. Which means I have to go in manually and change every checkbox link.
Attached is a document, column C & F highlighted in green are areas that users will input data. I need to create a button (top left of spreadsheet) that when pressed moves both the data from column C & F up into the box above. The top set of dates would be deleted and the dates from Trip 2 would move up into the Trip 1 position, Dates from Trip 3 would move up into Trip 2 position and so on.
I'm trying to do is loop through a range of cells, and if the cell meets a condition I want to move it and 2 cells to the right of it left by one cell.
Sub MoveRangeOfCellsBasedOnCellCriteria() Dim myrange, cell As Range Set myrange = ActiveSheet.Range("H2", Range("H65536").End(xlUp)) For Each cell In myrange If IsNumeric(Left(cell.Value, 1)) _ Or Left(cell.Value, 5) = "UNIT " _ Or Left(cell.Value, 4) = "THE " _ Or Left(cell.Value, 5) = "FLAT " Then Else cell.Range("A1:C1").Select Selection.Cut cell.Offset(0, -1).Range("A1").Select ActiveSheet.Paste cell.Offset(1, 1).Range("A1").Select End If Next cell End Sub
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice() Sheets("OrderDatabase").Select Range("B65536").End(xlUp).Offset(1, 0).Select With ActiveCell .Value = Orderform!G5.Value .Offset(0, 1) = Orderform!E10.Value .Offset(0, 2) = Orderform!E11.Value .Offset(0, 3) = Orderform!E12.Value .Offset(0, 4) = Orderform!E13.Value .Offset(0, 5) = Orderform!E15.Value .Offset(0, 8) = Orderform!E15.Value End With Sheets("Invoice").Select End Sub
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code: Sub Tester()
Dim WB As Workbook Dim WS As Worksheets Dim modCounter As Long Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm") Set WS = WB.Sheets(BM18)
I was wondering if it's possible to unhide a row directly below one that is visible?
I am creating a template for users that allows them to choose which lines (rows) they would like to use. They then hit a button to hide all the other lines they don't wish to use.
For each row that is visible I then need the row directly below it to become visible so that the user can enter associated information.
I'm stumped on how to do it. I have the user entering "a" in column A for any row they wish to keep - but I'm not sure how to incorporate this into unhiding the row below (or if I'm on the wrong track with my thinking).
How I can control many loops directly after each other. For example I have this script:
If (Cells(x, column) > 35 And Cells(r, column) < 25 Then
If (cells(x, 75) = "GotU") Then xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Else
If (cells(x, 85) = "GotYah") Then xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Else
If (cells(x, 95) = "GotYou") Then xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx End if
Is this script correct if I want the loops to check all data that I write (for ex. GotYou, GotYah etc.) or do I need to end every if before next if? I want that the loops makes all 3 controls.
I've been working with this script to import and paste a webpage to a worksheet. Once the webpage is on a worksheet I can pull it into VBA easily enough but I was wondering if there's a way to "paste" the webpage directly into an array in VBA and skip the paste to worksheet step?
Code:
Set IE = CreateObject("InternetExplorer.Application") With IE .Navigate theURL IE.Visible = False End With
I have developed an extensive program running on excell but with the user only seeing userforms. I would now like to build in a "print screen" button, but have no idea how to do this.
What it needs to do is capture the userform and all its entries (as it is displayed on the screen) and send this to the printer to be printed as a picture. I am assuming that there must be code available so that when ever the user clicks this button, the standard windows (or excell) print screen appears from which he will be able to choose the printer etc.
I have found some code that allows me to email directly from within a workbook, but the example only contains one addressee, I wish to send to 3 or 4 different addresses, these addresses would remain constant once entered. How do I alter the code?
Sub sendactiveworkbook() ActiveWorkbook.SendMail _ Recipients:="type-in-email-address", _ Subject:="New Quote Raised - Test Transmission " & Format( Date, "dd/mmm/yy") End Sub
