I need to extract the part of formula in a cell. How can I do that?
For instance; I have formula: =C2/3579 in cell E2
I want to copy the last part in that formula i.e. 3579 to some other cell.
The last part (3579) is not constant in every report. It may vary in each report thus the length may vary from 4 digits to 5 digits also.
I need to have a macro written which will allow me to extract information from any given workbook and copy them to my workbook. I'm thinking along the line of creating an input box upon opening the workbook, asking for the name of the workbook which contains the data. I would then use the data from the workbook and extract bits of information which I would copy to my current workbook.
However, I can't seem to figure out how to direct the answer of the input box to extract the information out of the target. And how would I refer to the workbook with the data in my code? I would need to refer to the data workbook as I need to extract information from it.
Is there a way to extract a specific part of the workbook and save it as a value in VBA:
For example:
Workbook title is "Data Set 2007" How would you extract 2007?
I would like to extract some data from a web page, but only part of it. The website is:
[url]
and I have a spreadsheet with many different ProjectId hyperlinks in a column (the final six-digit number). All I want is the large block of text that is in the middle of the page. Sometimes there is no text, as in:
[url]
So I don't know how to deal with that either...
I would just like to paste the text into a cell adjacent to the hyperlink. I know that there is a visibility issue with 1024 characters, but can cope with that (no text will be longer than the 32k+ chars).
Any help would be appreciated - it's for my wife's PhD, and I just want to make it easier on her. I am reasonably ok with macros, but am by no means expert! If you need clarification,
Extract Numeric Part From The String End with a macro, that J8 will turn 8, and R4 will turn 4.
View 9 Replies View RelatedCREATE TABLES LIKE BELOW?Column 1 Column 2
8 6CSS130 + 2CSS200g x10hanger 200 GM
250ml B2G1 Towel in bagx24 0607 250 ML
18 g-Mint 18 GM
100g 100 GM
150GM 150 GM
i have a data as above, i wanna to extract the 250ml from the column 1, only 250ml (basically i want to extract the size code like 150g, 100gm from the data above).
I have been confronted with an issue that has bugged me: Now do I extract a part of the string according to lets say "markers"?
Here is what I mean:
I use the code below to get the bottom range of my tables:
Code:
blimit = Activecell.Address
I haven't had problems because my tables were small, then I would:
Code:
blimit = Right(blimit, 3)
If the table was small there was no problem, since lets say the Activecell.Address = "$C$123", resulting in blimit = 123.
My how do I extract a part of the string, knowing I have 2 "$" ? That way I would make a version of this that always works.
I cannot use FIND or any formulas I am aware of since they all start counting from Right to Left... I thought of using Replace() to get the first "$" and change it for something else like "-" then looking for the second "$". But Replace() basically changes both signs... making my idea... well obsolete...
Now do I extract a part of the string according to lets say "markers"?
Here is what I mean:
I use the code below to get the bottom range of my tables:
Code:
blimit = Activecell.Address
I haven't had problems because my tables were small, then I would:
Code:
blimit = Right(blimit, 3)
If the table was small there was no problem, since lets say the Activecell.Address = "$C$123", resulting in blimit = 123.
My how do I extract a part of the string, knowing I have 2 "$" ? That way I would make a version of this that always works.
I cannot use FIND or any formulas I am aware of since they all start counting from Right to Left... I thought of using Replace() to get the first "$" and change it for something else like "-" then looking for the second "$". But Replace() basically changes both signs... making my idea... well obsolete..
I have 2 sheets in a file. One is given to me from our parts department containing all parts on a given truck model. The 2nd sheet is exported as a database file from inventor and imported as an update able sheet in excel.
I am needed to compare part numbers between the 2 sheets and the qty of each. So far I have it where it matches the part numbers and turns the ones I don't have in the model red. Now I'm trying to match the part numbers and pull the qty of said part from sheet 2, the imported one, and compare it to the to the qty in the 1st. All I really need to accomplish is matching the part numbers then copying the qty from sheet 2 to sheet 1 onto a new cell of the matched part number.
I have to sort list of thousands name (3000 names) and remove duplicates. My problem is majority of the names have their title (i.e) Prof. Dr. Ir. Sir. etc typed in, so I need to copy the title in different cell and have their name only. Here's what I expect:
Current List ----> Column A -->Column B
Drs. H. A. Andrew Boston, MRE. ----> Drs. H. --> Andrew Boston, MRE
Drs. H. Andrew Smith ----> Drs. H. --> Andrew Smith
H. Abd. Mohammed Junus ----> H. --> Abd. Mohammed Junus
Prof. DR. Jane Doe, MD ----> Prof. D --> Jane Doe, MD
Prof. DR. Ir. H. Randy Wong, MBA --->Prof. DR. Ir. H. -> Randy Wong, MBA
Dra. H. A. Karen Patel ----> Dra. H. --> Karen Patel
Drs. H. A. M. Kangkong ----> Drs. H. A. --> M. Kangkong
Prof. Drs. H. A. Kareem Saleh, Ph.D -> Prof. Drs. H. A. ->Kareem Saleh, Ph.D
Dra. Hj. Nina Schorder ----> Dra. Hj. --> Nina Schorder
Ir. Abdul Jabbar ----> Ir. --> Abdul Jabbar
I have some cells with text entered in column A.
These cells contain a time reference either in '09:30 - 16:30' format or just an 'AM/PM' format.
What I need to do is to populate column B with the part of the string that comes AFTER the times in the text (either in hh:mm format or AM/PM format)
Example
336 Data 2012 Classroom Induction 2012/08/28 09:30 - 16:30 data about this ------> data about this
336 Information about this 2013/04/04 09:00 - 13:00 Information 2 ------> Information 2
336 info CHS Suffolk 2013/05/07 PM DRC, BSE ------> DRC, BSE
364 information 2013/02/12 AM DRC, BSE ------> DRC, BSE
I cannot get this to work and cannot use Text To column as there is no character I can use to split it.
calculate a formula for the following: 1 per 25 for the first 50 and 1 per 50 for the remainder exceeding 50 ad infinitum (always rounding up).
View 6 Replies View RelatedI want to replace a part of a formula with its value.
eg say I have a formula =vlookup($a55,$a$2:$e$50,column(),false).
I want to replace column() with its value. There will be plenty of cells with this formula What can be the best way of achieving this.
I am trying to create my household budget in Excel, but there is a sub-category.
I need a formula which will calculate the following:
Under the "Daily living" section, I have typed the names of the sub-categories, eg: ,
Groceries
General Household
Cleaning
Education/Lessons
Cash
I want it to find all totals next to the word "groceries" in the main part of the spreadsheet, where I type in my credit card statements according to date.
In other words, I want it to add up all my entries/totals next to the word 'groceries' and show the total up at the top of the document, in the "amount" column so I can see the monthly category totals at a glance.
I am trying to modify a cell formula with the Replace function.
Code:
The Formula in the target cell =
='C:Documents and SettingsHoliday macro[Holiday2011.xls]Year 2011'!C5
I am using the below code but it returns just the end portion ='Year 2012'!C5
where I expect just the year to change
='C:Documents and SettingsHoliday macro[Holiday2012.xls]Year 2012'!C5
Where last year = 2011
Yr=2012
Range("C3").Formula = Replace(Range("C3").Formula, LastYr, Yr)
I have a dump which looks like below sample:
3
3
2
2
3
3
2
2
[code]....
The actual dump will have around 200 - 500 rows of data.
From the above I need to manually group them which are similar.
E.g. the data of (3, 3, 2 , 2) in row 1 & 2 are matching, so they will be group 1 & row 3 will be group 2, row 4 will be group 3 respectively.
The sum & sort did not work for me as sometimes the data with the same range are not in same order.
E.g of the output below for the above data:
Group No.
1
3
3
2
2
1
3
3
2
2
[code]....
I have the following formula in my workbook;
=SUMPRODUCT((A2:A8702"")/COUNTIF(A2:A8702,A2:A8702&""))
The data in the workbook is imported automatically and the range 'A8702' is different every time the data is imported, although is always in column A.
Can I use the value of a cell to determine the range?
So I have used this to get the ast used row number;
=MAX(ROW(A:A)*(A:A""))
I need a cell formula (gets put in by macro) that returns part of a workbook name.
The worksheet name will always be different, but will contain either
SD1, SD4, BDO, BD (not neccessarily in Caps)
and it is this key code that i want returned in the cell (G2).
so if the worksheet name is
NW SD1 bobs your uncle. when macro runs G2 returns SD1
or
BDO xyz. when macro runs G2 returns BDO
This IF formula does not work on the last part of this formula
IF(E10>50,"$50.00",0)))) and I think there is a conflict with the
IF(E9>199,(E9*0.01) but I cannot figure out what the problem is.
=IF(E8>0,"$0.00",IF(E9199,(E9*0.01),IF(E10>50,"$50.00",0))))
I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I'll try to keep this brief. Our part #'s look like this. XP014567. Where the first pair of characters stand for a value(say XP=Bolt), the second pair stand for a value(01= Grade 2), and so on. What I would like to be able to do is type in the part numer and have the description automatically populate. Is there an easy way to do this? I'm running Excel 2003.
View 4 Replies View RelatedIm using a formula to identify new part numbers. The formula is: =IF(ISNUMBER(MATCH(A217,Existing!A:A,0)),"","NEW"). However you can clearly see from the attached that if has flagged a duplicate part number as new. Why would it do that? Check out A1368 in existing and A217 in new.
View 5 Replies View RelatedI have 2 sheets, Sheet1 and Sheet2. I want to populate Sheet2 Column B with a formula which will reference Column B of sheet1 so that on each iteration of the For..Next, the cell being referenced in the formula will change. So if i = 5, I'd like the cell to be populated with the formula =Sheet1!B5
View 4 Replies View RelatedI have this function that checks a postcode and returns a value using the first part of the postcode.
What i would like to know is how to modify the function so if there is only the first part of a postcode already entered, it looks for that.
At the moment sometimes i get #N/A even though i know that value is in there.
Code:
=INDEX(U$4:U$1068,LOOKUP(1068,MATCH(IF({0,1},LEFT(B338,FIND(" ",B338)-1),LEFT(B338,1+ISERR(MID(B338,2,1)+0))),T$4:T$1068,0)))
I'm trying to create a macro to replace a link on a formula.
The formula is as below
='[Players Report 31121999.xls]Player1'!$AK$23
Where 31121999 is the date. there's a workbook everyday with different sheets for every player
I want to have a macro that gets the date I inputed in another cell and changes the date in the formula I displayed above (just changing the date).
I've got a problem with my workbook.
It gets datas from another workbooks and contains cells with formulas like these:
='C:YEAR[2006-ab.xls]'!A12
='C:YEAR[2006-bc.xls]'!C18
et.c.
Is it possible to write a code in VBA to replace a part of formulas above?
I have a spreadsheet serving as a simple document register. Column A is a unique document reference number, which is a simple concatenation of some text which prefixes all of the document numbers, plus the date in "yyymmdd" format (from column B) and a 3-digit sequence number (from column C).
Column B has no formula - my macro just pastes a timestamp in there.
Column C is a sequence number field which has a formula comparing the "yyymmdd" part of the timestamp with the cell directly above it. If they are different then the sequence number becomes "001" - if they are the same then the sequence number is incremented by 1, so all docs created on the same day have an incremental sequence number.
Here's the problem. When I want to add a new document I need to copy the last row down to the next row (in preparation for the next document to be created by my system) and there are two ways I've been doing this - one which works and one which doesn't.
This works > Say my last row (with the hidden formulae) is row 13. I select A13:C13 plus the three blank cells directly below (A14:C14) and do a Ctrl+D to copy them down. All is well.
But the following doesn't work - why? > I select the entire row 13, copy it, then reinsert it at row 13 so the formulae in row 13 get shifted down to row 14. What goes wrong here is that my formula in column C which WAS comparing the date in B13 to the one in B12 NOW compares B13 to B11
I've attached an example spreadsheet to try and demonstrate the problem. Sheet 1 is the original sheet. Sheet 2 is the "copying down" method which works, and Sheet 3 shows what happens when you copy the entire row 13 and "Insert copied cells".
excel-insertrow-formula-problem.xls
I need to pull information from a cell that is full of text and numbers and get it to creat a formular.
More information in the spreadsheet example
Is there anyway of aligning part of a formula to a certain character limit (63)?
For example:
Aaaaaa(A1), bbbbbbb(B1), 1111111.00(C1)
Aaaa(A2), bbbb(B2), 11.00(C2)
to
Aaaaaa(A1), bbbbbbb(B1),____________1111111.00(C2)
Aaaa(A2), bbbb(B2),______________________11.00(C2)
I have a formula that combines the the text of various cells.
Is there a way to automatically make part of the cell Bold - so in this case I want the Cell B13 to appear in bold.
See formula below: