How To Get Doc To Open In Fullscreen Mode And Lock This View
May 25, 2014How can I get a excel document to automatically open in full screen mode, and is it possible to lock it in this view?
View 2 Replies
ADVERTISEMENT
Excel 2010 :: Making Worksheet Open In Full View Mode At User End
Sep 3, 2013I'm using Excel 2010. I have a workbook with only 1 worksheet in it and it will be sent to several people. I want that excel file to open in Full View when the end user opens it. Is this possible without any VBA codes?
View 2 Replies View RelatedDisable ESCAPE Key To Get Out Of Fullscreen Mode
Apr 1, 2014My workbook opens in Full Screen mode. Now, I don't want anyone to press the ESCAPE key to go back to Normal View. I have tried many different codes but for some reason I can't seem to get it to work.
View 2 Replies View RelatedCan't Edit File That Opens In Protected View Mode
Apr 12, 2013A client has sent me an Excel workbook that appears on the screen with the message adivising that it is Protected View as a result of having been downloaded from the internet. If I click on the Enable Editing button the workbook is completely deactivated. I have played around with my Trust Centre settings but nothing seems to work.
View 1 Replies View RelatedVBA - Open File NOT In Read Only Mode
Nov 27, 2011I have a VBA script that has been running fine for months on one computer. Today, I ran it on another computer and it opened files in read only mode which disrupted everything.
The file open command is the following:
Workbooks.Open Filename:=sourcePath & sourceFileName
I searched the entire project and appended ", readonly:=false" to every open command. So, the command became
Workbooks.Open Filename:=sourcePath & sourceFileName, readonly:=false
Still, Excel opened the file in read only mode as seen in the title bar (filename [read-only]).
If I double-clicked on the file and opened it, it's NOT in read only mode. I checked the property of the file. It is NOT read only.
2 Person Can Open File As Compatible Mode?
Jun 7, 2013I have a file is used by many person at the same time. Sometime 2 person can open it as compatible mode , when 2nd person save will write over the 1st person data, that means all have been done by 1st person will be gone, serious problem.
Normally open a file will tell me who have using it , but it show wrongly person although the person has not open the file. worse that 1 day only show 1 person name.
Always Open Workbook In Full Screen Mode?
Feb 12, 2014I already have a couple of VBA commands on my sheet. so I've tried to add:
[Code] .....
but this isnt making the sheet automatically go full screen.
Open Workbook In Full Screen Mode
Jul 23, 2004I like a particular workbook to open in full screen mode.
How would I do that?
Open And View The Contents On The Spreadsheet
Jan 30, 2014I have a Excel Addin file which i would like to open and view the contents on the spreadsheet
View 1 Replies View RelatedOpen A Specific Folder View Window
Feb 4, 2009I'm using this code below sucessfully to open a specific folder view window. What i'm looking for is a way to amend it slightly so that when the window opens the 'folder tree' on the left hand side does not show, as it always does at the moment.
View 2 Replies View RelatedIgnore Protected View - Open Files To Be Copied
Feb 3, 2014Opening several files and combining them into 1 workbook. The files will not open - due protected view......
How do I allow the files to be opened to be copied?
Forcing Fullscreen Works Sometimes?
Dec 6, 2013I want to have a fullscreen application all the time, so for this I've added to things in my code:
1) Application.DisplayFullScreen = True in Workbook_Open
2) Same in WorkBook_WindowsResize
I open my workbook, it goes fullscreen. Until now all OK. However, if I press ESC or doubleclick on the topbar, it goes out of it.
Now the weird thing: if I click the "Restore window" button (which is right under the application maximize button that incidentally I have disabled) it snaps on fullscreen and THEN it keeps this state forever, even on ESC/doubleclick. Which is what I want.
So my question is: what does exiting from fullscreen and going back in change so that the workbook event starts triggering, and how I can replicate it programmatically? I've already tried WindowState = xlNormal followed by xlMaximize, it doesn't change anything.
Display FullScreen After Window Maximized?
May 24, 2012I know how to use Application.DisplayFullScreen = True to enlarge the screen upon openning the excel file. But, when you minimize the screen and then maximize it again, the full screen goes back to normal. How do you force the screen to stay Full Screen?
View 5 Replies View RelatedForce Specific Workbook Only To Fullscreen
Apr 23, 2008I have an auto_open macro in my workbook that sets the workbook to FullScreen. However, it also makes existing open workbooks fullscreen. Is there some way that I can leave the previously open workbooks not fullscreen (i.e. so the toolbars are still visible)?
View 3 Replies View RelatedShow Entire Vertical Scrollbar In Fullscreen
Apr 15, 2008Application.DisplayFullScreen = True
I've just noticed that putting the excel application in fullscreen mode does not take into account the "working area" (i.e. screenheight - taskbarheight ). as such, the bottom area and "down scroll" button of the vertical scroll bar are covered up by the taskbar (2rows)...(they are behind is, and therefore not visible/accessible). without disappearing/hiding the bottom-docked taskbar, is there anyway to be in fullscreen and have the bottom part of the vertical scroll bar visible?
Quit Fullscreen, Hide Sheets, Save, Close On Userform Button
Apr 15, 2008I have a fairly elaborate close-down routine for my workbook.
1) Quit out of fullscreen (restore initial state of excel before saving)
2) Hide all sheets but one (enforces cant do anything unless macros enabled)
3) Automatically save without a prompt
4) Close the workbook
I've researched it well and implemented it to the point where it works, but only if the user clicks the excel application close button -- the "X" in the titlebar (hence not in fullscreen).
However, if I launch the process via a userform button click, then for some reason the
DisplayFullscreen = False, Sheets hiding, and save codes have no effect (fullscreen persists, sheets are not hidden, no file is saved) in the Workbook_BeforeClose() subroutine....
I repeat: all the above works fine if process was launched by "native" excel button, but does not have any effect if launched from a userform commandbutton. (?!?!) any ideas what's going on?
I'm including my code so you can get an idea how it's structured.... by it's pretty "by the forum" as far as I can tell...
Private Sub CloseButton_Click()
If(1) Then
'Method 1 - close directly from userform command button
With ThisWorkbook
'.RunAutoMacros (xlAutoClose)
.Close
End With
Else
'Method 2 - set a timer to call a function to perform
' "ThisWorkbook.close" in a function outside of the userform
CustMenuCloseTimer = Now + TimeSerial(0, 0, 2)
Application .OnTime CustMenuCloseTimer, "CustMenu_CloseAction"
End If
End Sub
Excel 2007 :: How To Adjust Protected View Settings But Protected View Tab Is Missing From Trust Centre Settings
Dec 12, 2013Excel 2007 - need to adjust protected view settings but the protected view tab is missing from my Trust Centre settings - have the following tabs - trusted publisher / location, add-ins, activeX, macro, message bar, external content and privacy options. Document is a revenue authority download and without being able to adjust the protected view settings, can't input data.
View 3 Replies View RelatedLock Sheets With Formulas And Lock Sheets With Values
Jul 2, 2009do you know if there is vba code to lock formulas so someone sees but does not touch and the same for values see but cant change??
my sheets with formulas are SUMMARY and Sheet2
sheet with value is TABLE
Mode
May 15, 2006I want to find out the most frequently occurring value for the below
example. Based on the example below I want to know Column A = Sales, Column
B = s682, which value is the most frequently occurred.
Column A: Column B: Column C:
Sales s682 4
Sales s681 1
Marketing s683 5
Sales s682 4
Finance s682 4
Sales s683 5
Sales s682 2
Mean, Median And Mode
Apr 29, 2008Is there a good/easy formula to use when trying to find the mean, median and mode for a column? If so, can someone post it? I'd like to make it as easy as possible (obviously!).
View 6 Replies View RelatedMode Or Frequency
Jan 31, 2006I have a large data set. Within the column I have determined the mode. How
do I find the second most common number, third most common, etc.?
240
240
240
240
240
240
240
240
288
288
288
300
Mode Function
Mar 10, 2008I want to use a formula to detect which name is appearing most in a selected range of cells. The Mode formula gives this result but for numbers. I was thinking of the probability of having to combine the LEN function with the MODE function.
View 9 Replies View RelatedMode In Subtotal
Feb 16, 2009=mode(x#:x#) will give the most frequently ocurring value in the range.
But I want to be able to use mode like subtotal where it will show only the most frequent value within the filtered list...
Using =MODE And Ignoring Zeros
Nov 3, 2009I need a formula that will find the mode from a range of numbers but ignore the 0's. I have worked out the below array formula which seems to work.
{=IF(MODE(IF(N18:P25>0,N18:P25))=1,"Low",IF(MODE(IF(N18:P25>0,N18:P25))=2,"Secure",IF(MODE(IF(N18:P2 5>0,N18:P25))=3,"High")))}
The only thing is, if only one cell contains a number other than 0 (eg. 1,2 or 3) then it returns #N/A. Ideally i'd like it to show the appropriate response for the number that is in the number range. For example - if one cell shows the number 2 and the rest are 0's, i'd like it to show Secure(the response for 2) rather than #N/A.
How To Set Auto Scale Mode To DPI
Feb 14, 2014My display scale is 125%. A college's is set to %100. This causes errors when I place Shapes to saved locations, .Top & .Left programmatically. Based on Google searches, it appears that setting the auto scale mode to DPI may solve this problem. How do I set it?
View 5 Replies View RelatedUsing Mode Function When Range Changes
Sep 3, 2009How would i find the mode of a range of numbers that changes?
For example, I want a simple out put of the Mode for the numbers after Aand D, and E and so on, without having to do it manually. A function perhaps?
I have attached spreadsheet. The 2 left columns are the raw data and the right columns are what i want the outcome (modes) to be. Is there a way I can do this without having to go through this manunally for every one?
Delete In Filter Mode...
Jan 29, 2010I have the following code
Columns("A:A").Insert Shift:=xlToRight
Range("A1").Value = "Date added"
Range("A2", "A" & Cells(Rows.Count, "B").End(xlUp).Row).Value = Date
Cells.Select
Selection.AutoFilter
ActiveSheet.Range("$A$1:$L$3115").AutoFilter Field:=2, Criteria1:=Array( _
"1", "2", "3", "4", "5"), Operator:=xlFilterValues
but how do I delete what has been filtered without deleting the headers?
Stuck In Design Mode?
Apr 29, 2008For some strange reason the workbook I have been using on a daily basis has suddenly decided to go into design mode and stay there. No matter how many times I click the design mode button in and out it always stays in and I can't use my buttons.....it just selects them?
View 9 Replies View RelatedUse Excel In Share Mode?
Jan 3, 2013We have a spreadsheet at work that is saved as Micosoft.xlsx [share].
I think the "[share]" means that more than one person can access it at the same time. How do you create a document like this.
2nd Mode - 2nd Most Frequent Number
Dec 31, 2007In this old thread (which the software did not let me continue) Yogi mentions 2nd mode and third mode etc.
[url]
In the above thread, Yogi has a nice formula for finding the "other mode", when the other mode is a tie. I am wondering - is there a simple formula
to find the 2nd (or 3rd) most frequent number. For example the (AFAIK non-existent) formula or function would act like this:
1
1
1
3
3
2
"modelarge(range,2)" should return 3