How would i find the mode of a range of numbers that changes?
For example, I want a simple out put of the Mode for the numbers after Aand D, and E and so on, without having to do it manually. A function perhaps?
I have attached spreadsheet. The 2 left columns are the raw data and the right columns are what i want the outcome (modes) to be. Is there a way I can do this without having to go through this manunally for every one?
I want to use a formula to detect which name is appearing most in a selected range of cells. The Mode formula gives this result but for numbers. I was thinking of the probability of having to combine the LEN function with the MODE function.
View 9 Replies View RelatedI'm trying to calculate the mode for a large data set, but there is no 'mode function' in subtotal. I need to find the mode for each change in day - without having to retype the function.
View 11 Replies View RelatedI’m using excel 2003 and I need help with the MODE function. I have a spreadsheet with 142 work types’ rows of work with each one showing the last 13 months of work received. I have set up a mode function for each work type, but for the ones when excel cannot work out the mode it puts n/a in and I have to do them manually, by looking at the last 13 months data and basically guessing a mode figure – which is a pain (e.g. if there was 13 different numbers from say 120 – 135 excel would give n/a but I would put the mode at around 128. As this spreadsheet gets updated monthly is there a way I can trick excel into giving a mode figure, or a figure close to what the mode should be. I have attached a sample of the spreadsheet.
View 3 Replies View RelatedI have a spreadsheet with columns of data running from column C to column Z.
In column B i am trying to work out which word appears the most.
For exaple in cell B2 i am looking for a formula to work out which word appears the most from cells C2:Z2.
I am looking for assistance for 2 vbcode functions that will provide current:
1) Calculation Mode - whether automatic, manual or semi automatic; and
2) Calculation Status - whether a recalc is required or not.
These functions need to work regardless of the calculation mode and always need to show the current status.I have tried creating volatile functions, but the problem I face is that if the calculation mode is manual, the function's return value is not updated unless I force a recalc which renders the purpose of the exercise useless.
I am trying to use the MODE function over multiple sheets within a work book, however when using =MODE( 'First Page:Last Page'!K5). the formula returns "#REF!". this should be returning 7, 8 or 9. I have already checked to see if the range is wrong, but when I changed the function to SUM, AVERAGE, etc they work fine....
however due to the need for non-excel users to easily add extra pages, adding each page individually would be a pain (and would mean I would need to train the staff in Excel)
i've tried searching for "Mode Function in Text" , "Mode Function by Text" but to no avail. Can someone please guide me in how to do a Mode by Text? =MODE(number1,number2,...) But if i have a whole chunk of data in Strings in cells Range A1:C50
1) How can i get the mode of that Range ?
2) is it possible to get the statistic of those for e.g.
Apple 20
Pear 30
Watermelon 50
etc......
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies View RelatedI have a function
VB:
Function f1(Matrix As Range)
'Does something and returns f1 = a double
End Function
And a second function which defines and constructs a matrix of doubles to use as an argument in f1 to return a double:
VB:
Function f2(dD As Double)
Dim MatrixRed() As Double
Redim MatrixRed(1 To dD, 1 To 10)
For i = 1 To dD
For j = 1 To 10
MatrixRed(i, j) = i * j
Next
Next
f2 = f1(MatrixRed)
End Function
I get an output error (#VALUE). I think it has something to do with MatrixRed not being a range anymore?
I’m trying to use the SUMIFS function in Excel 2007 to evaluate the following formula:
{=SUMIFS(range to sum, range to evaluate, evaluation criterion)}
The range to sum is A1:A10, the range (dates) to evaluate are in B1:B10, and the evaluation criterion is that the date is before 31/10/1999.
So my formula looks like this:
{=SUMIFS(A1:A10,B1:B10,”<31/10/1999”)}
This works fine, but how do I refer the 3rd argument in the function to a date in a particular cell rather than typing in the date specifically?
I was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.
My
Public Function SortRange(rngToSort As Range, valCol As Integer)
Dim Swapper As Variant
Dim i As Integer, _
j As Integer, _
k As Integer
For i = 1 To rngToSort.Rows.Count
For j = 1 To rngToSort.Rows.Count - i
If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then
For k = 1 To rngToSort.Columns.Count
Swapper = rngToSort(j, k)
rngToSort(j, k) = rngToSort(j + 1, k)
rngToSort(j + 1, k) = Swapper
Next k
End If
Next j
Next i
SortRange = rngToSort
End Function
I want to find out the most frequently occurring value for the below
example. Based on the example below I want to know Column A = Sales, Column
B = s682, which value is the most frequently occurred.
Column A: Column B: Column C:
Sales s682 4
Sales s681 1
Marketing s683 5
Sales s682 4
Finance s682 4
Sales s683 5
Sales s682 2
I have a workbook with several worksheets in the same format. I would like to have a function to output the sheets that have rows in which collumn A = X AND collumn B = Y.
I've been working on this one for a couple days now and I'm not making much progress.
Is there a good/easy formula to use when trying to find the mean, median and mode for a column? If so, can someone post it? I'd like to make it as easy as possible (obviously!).
View 6 Replies View RelatedI have a large data set. Within the column I have determined the mode. How
do I find the second most common number, third most common, etc.?
240
240
240
240
240
240
240
240
288
288
288
300
=mode(x#:x#) will give the most frequently ocurring value in the range.
But I want to be able to use mode like subtotal where it will show only the most frequent value within the filtered list...
I need a formula that will find the mode from a range of numbers but ignore the 0's. I have worked out the below array formula which seems to work.
{=IF(MODE(IF(N18:P25>0,N18:P25))=1,"Low",IF(MODE(IF(N18:P25>0,N18:P25))=2,"Secure",IF(MODE(IF(N18:P2 5>0,N18:P25))=3,"High")))}
The only thing is, if only one cell contains a number other than 0 (eg. 1,2 or 3) then it returns #N/A. Ideally i'd like it to show the appropriate response for the number that is in the number range. For example - if one cell shows the number 2 and the rest are 0's, i'd like it to show Secure(the response for 2) rather than #N/A.
My display scale is 125%. A college's is set to %100. This causes errors when I place Shapes to saved locations, .Top & .Left programmatically. Based on Google searches, it appears that setting the auto scale mode to DPI may solve this problem. How do I set it?
View 5 Replies View RelatedI have the following code
Columns("A:A").Insert Shift:=xlToRight
Range("A1").Value = "Date added"
Range("A2", "A" & Cells(Rows.Count, "B").End(xlUp).Row).Value = Date
Cells.Select
Selection.AutoFilter
ActiveSheet.Range("$A$1:$L$3115").AutoFilter Field:=2, Criteria1:=Array( _
"1", "2", "3", "4", "5"), Operator:=xlFilterValues
but how do I delete what has been filtered without deleting the headers?
For some strange reason the workbook I have been using on a daily basis has suddenly decided to go into design mode and stay there. No matter how many times I click the design mode button in and out it always stays in and I can't use my buttons.....it just selects them?
View 9 Replies View RelatedWe have a spreadsheet at work that is saved as Micosoft.xlsx [share].
I think the "[share]" means that more than one person can access it at the same time. How do you create a document like this.
In this old thread (which the software did not let me continue) Yogi mentions 2nd mode and third mode etc.
[url]
In the above thread, Yogi has a nice formula for finding the "other mode", when the other mode is a tie. I am wondering - is there a simple formula
to find the 2nd (or 3rd) most frequent number. For example the (AFAIK non-existent) formula or function would act like this:
1
1
1
3
3
2
"modelarge(range,2)" should return 3
How to find Median,Mode in a excel sheet which contains more than 255 rows of data?
View 6 Replies View RelatedI would like to calculate the mode of a range of cells containing text. To do this I would use a formula like:
A
red
yellow
orange
orange
blue
orange
yellow
=index(A1:A7,mode(match(A1:A7,A1:A7,0)))
(orange)
How do I find the mode of a range of cells containing text with an additional criteria, like finding the mode of A only for values with a "yes" in B as in:
A B
red no
yellow yes
orange no
orange no
blue yes
orange no
yellow yes
In this case, the answer I'm looking for would be (yellow).
i have a userform that uses auto filter the filter the search results. I am wondering if someone can show me how to turn the auto-filter off once action (printing) is completed.
below is the code I am using:
Private Sub CommandButton1_Click()
Dim ws As Worksheet
Set ws = Sheets("ComplaintData")
With ws
.AutoFilterMode = False
With . Range("A1:L1")
.AutoFilter
If ComboBox1.Value = "Month" Then
.AutoFilter Field:=11, Criteria1:=ComboBox2
Also, I was given a code in this forum to handle the "Item not found" situation. Where would I insert it in this code. If the searched item doesnt exist, then I would like the message box to come up before it shows the printer selection box and if the searched item exists then directly show the printer selection box.....following were the two lines
On Error Goto ErrFindClick
ErrFindClick:
MsgBox " " & combobox1.Value & " Not Found!"
Exit Sub
I cannot run code from the formula bar.
I have a context sensitive menu
Sub AddContextMenu()
On Error Resume Next
Application. CommandBars("formula bar").FindControl(msoControlButton, 0, "MYMENU").Delete
On Error Goto 0
Dim objTemp As CommandBarButton
With Application.CommandBars("formula bar")
Set objTemp = .Controls.Add(msoControlButton, , , .Controls.Count + 1, True)
With objTemp
.Caption = "Formula Menu"
.BeginGroup = True
.OnAction = "TestMe"
.Tag = "MYMENU"
End With............
am createing userform for entering system details, when i assigning peripherals to the system must be unique ,no other system not used.for this am write code , it's working fine. but when i searching details of system using desk no, if when cursor go to the unique fields the data is clearing. due to unique identity.
and other one
my drop down values adding form other sheet" Working sheet", when system is assigned , auto maically paritucular fields status will changes from "Working" to "assigned" in " Working sheet".
is it possible changes the text depending one sheet cell ref to other sheet.? you can easily understood in following path am attached my file.
[URL]
I have pulled the mode from the sheet called Daily for cells B5:B33
=MODE(Daily!B5:B33)
I need the second and third most occurring figures, Im not sure if it matters but they are times
I tried this but I don't seem to be getting it right for the 2nd mode
=MODE(IF(Daily!B5:B33<>MODE(Daily!B5:B33),Daily!B5:B33,""))
I have a production report card spreadsheet with numerous checkboxes. Originally I also had text boxes for user input - which I have since removed all of and simply unlocked cells for user input (I protect the spreadsheet). My problem is that now that I have removed ALL of the textboxes - I get the error message "Can't exit design mode because Control 'TextBox3' can not be created." everytime I go to lock the spreadsheet after tweeking or upon opening of the file. I also cannot use the checkboxes now because I am stuck in design mode.
Any thoughts on what might be causing this...or better yet...how to stop the error msg altogether? I googled and no answers...some theories that it was a bug with excel2003...but I find it hard to believe as I found posts for the same message of users of WORD2003...so I am thinking it might be VBA related?