I want to use a formula to detect which name is appearing most in a selected range of cells. The Mode formula gives this result but for numbers. I was thinking of the probability of having to combine the LEN function with the MODE function.
How would i find the mode of a range of numbers that changes?
For example, I want a simple out put of the Mode for the numbers after Aand D, and E and so on, without having to do it manually. A function perhaps?
I have attached spreadsheet. The 2 left columns are the raw data and the right columns are what i want the outcome (modes) to be. Is there a way I can do this without having to go through this manunally for every one?
I'm trying to calculate the mode for a large data set, but there is no 'mode function' in subtotal. I need to find the mode for each change in day - without having to retype the function.
I’m using excel 2003 and I need help with the MODE function. I have a spreadsheet with 142 work types’ rows of work with each one showing the last 13 months of work received. I have set up a mode function for each work type, but for the ones when excel cannot work out the mode it puts n/a in and I have to do them manually, by looking at the last 13 months data and basically guessing a mode figure – which is a pain (e.g. if there was 13 different numbers from say 120 – 135 excel would give n/a but I would put the mode at around 128. As this spreadsheet gets updated monthly is there a way I can trick excel into giving a mode figure, or a figure close to what the mode should be. I have attached a sample of the spreadsheet.
I am looking for assistance for 2 vbcode functions that will provide current:
1) Calculation Mode - whether automatic, manual or semi automatic; and
2) Calculation Status - whether a recalc is required or not.
These functions need to work regardless of the calculation mode and always need to show the current status.I have tried creating volatile functions, but the problem I face is that if the calculation mode is manual, the function's return value is not updated unless I force a recalc which renders the purpose of the exercise useless.
I am trying to use the MODE function over multiple sheets within a work book, however when using =MODE( 'First Page:Last Page'!K5). the formula returns "#REF!". this should be returning 7, 8 or 9. I have already checked to see if the range is wrong, but when I changed the function to SUM, AVERAGE, etc they work fine.... however due to the need for non-excel users to easily add extra pages, adding each page individually would be a pain (and would mean I would need to train the staff in Excel)
i've tried searching for "Mode Function in Text" , "Mode Function by Text" but to no avail. Can someone please guide me in how to do a Mode by Text? =MODE(number1,number2,...) But if i have a whole chunk of data in Strings in cells Range A1:C50
1) How can i get the mode of that Range ? 2) is it possible to get the statistic of those for e.g.
I want to find out the most frequently occurring value for the below example. Based on the example below I want to know Column A = Sales, Column B = s682, which value is the most frequently occurred.
Is there a good/easy formula to use when trying to find the mean, median and mode for a column? If so, can someone post it? I'd like to make it as easy as possible (obviously!).
The only thing is, if only one cell contains a number other than 0 (eg. 1,2 or 3) then it returns #N/A. Ideally i'd like it to show the appropriate response for the number that is in the number range. For example - if one cell shows the number 2 and the rest are 0's, i'd like it to show Secure(the response for 2) rather than #N/A.
My display scale is 125%. A college's is set to %100. This causes errors when I place Shapes to saved locations, .Top & .Left programmatically. Based on Google searches, it appears that setting the auto scale mode to DPI may solve this problem. How do I set it?
For some strange reason the workbook I have been using on a daily basis has suddenly decided to go into design mode and stay there. No matter how many times I click the design mode button in and out it always stays in and I can't use my buttons.....it just selects them?
In this old thread (which the software did not let me continue) Yogi mentions 2nd mode and third mode etc.
[url]
In the above thread, Yogi has a nice formula for finding the "other mode", when the other mode is a tie. I am wondering - is there a simple formula to find the 2nd (or 3rd) most frequent number. For example the (AFAIK non-existent) formula or function would act like this:
I would like to calculate the mode of a range of cells containing text. To do this I would use a formula like:
A red yellow orange orange blue orange yellow
=index(A1:A7,mode(match(A1:A7,A1:A7,0))) (orange)
How do I find the mode of a range of cells containing text with an additional criteria, like finding the mode of A only for values with a "yes" in B as in: A B red no yellow yes orange no orange no blue yes orange no yellow yes
In this case, the answer I'm looking for would be (yellow).
i have a userform that uses auto filter the filter the search results. I am wondering if someone can show me how to turn the auto-filter off once action (printing) is completed.
below is the code I am using:
Private Sub CommandButton1_Click() Dim ws As Worksheet Set ws = Sheets("ComplaintData")
With ws .AutoFilterMode = False With . Range("A1:L1") .AutoFilter If ComboBox1.Value = "Month" Then .AutoFilter Field:=11, Criteria1:=ComboBox2
Also, I was given a code in this forum to handle the "Item not found" situation. Where would I insert it in this code. If the searched item doesnt exist, then I would like the message box to come up before it shows the printer selection box and if the searched item exists then directly show the printer selection box.....following were the two lines
On Error Goto ErrFindClick
ErrFindClick: MsgBox " " & combobox1.Value & " Not Found!" Exit Sub
Sub AddContextMenu() On Error Resume Next Application. CommandBars("formula bar").FindControl(msoControlButton, 0, "MYMENU").Delete On Error Goto 0 Dim objTemp As CommandBarButton With Application.CommandBars("formula bar") Set objTemp = .Controls.Add(msoControlButton, , , .Controls.Count + 1, True) With objTemp .Caption = "Formula Menu" .BeginGroup = True .OnAction = "TestMe" .Tag = "MYMENU" End With............
am createing userform for entering system details, when i assigning peripherals to the system must be unique ,no other system not used.for this am write code , it's working fine. but when i searching details of system using desk no, if when cursor go to the unique fields the data is clearing. due to unique identity.
and other one
my drop down values adding form other sheet" Working sheet", when system is assigned , auto maically paritucular fields status will changes from "Working" to "assigned" in " Working sheet". is it possible changes the text depending one sheet cell ref to other sheet.? you can easily understood in following path am attached my file.
I have a production report card spreadsheet with numerous checkboxes. Originally I also had text boxes for user input - which I have since removed all of and simply unlocked cells for user input (I protect the spreadsheet). My problem is that now that I have removed ALL of the textboxes - I get the error message "Can't exit design mode because Control 'TextBox3' can not be created." everytime I go to lock the spreadsheet after tweeking or upon opening of the file. I also cannot use the checkboxes now because I am stuck in design mode.
Any thoughts on what might be causing this...or better yet...how to stop the error msg altogether? I googled and no answers...some theories that it was a bug with excel2003...but I find it hard to believe as I found posts for the same message of users of WORD2003...so I am thinking it might be VBA related?
I've created a spreadsheet that has a number of command buttons acting as hyperlinks navigating to other worksheets within the workbook and other files. The buttons only function when in design mode and no matter what I try the document will not open in design mode. For ease of use I wanted to avoid training people on how to go into design mode, anyone aware of a work around?
My workbook opens in Full Screen mode. Now, I don't want anyone to press the ESCAPE key to go back to Normal View. I have tried many different codes but for some reason I can't seem to get it to work.
a) appear more app-like, and b) show more data in the available space.
I do not want to go too elaborate by hiding (remembering and restoring) control bars and I reckon the View Full Screen is pretty much okay for my purposes.
I am currently invoking View Full Screen on Workbook_Activate but hitting the ESC key returns to normal view. I can already see my users hitting the ESC key for various reasons and ruining my master plan.
Is there are any way to prevent unintended ESC from Full-Screen or otherwise lock in the full-screen mode until revoked intentionally by macro (shortcut)?
I am using a lot of double click routines in my sheet. In order for the sheet to be more user friendly I have used the comments of cells to tell the user what to do. For instance "Double click to choose type" or some such. Everything works great except that after the user selects what they want from the userform and it hides and the focus comes back to the sheet, the comment is in edit mode. While this is not horrible it is not as nice as I would like. I have tried to have my code send the active cell to another cell and then back, but that doesn't seem to work. Does anyone have any ideas on how to keep the comments from going into edit mode?
a) appear more app-like, and b) show more data in the available space.
I do not want to go too elaborate by hiding (remembering and restoring) control bars and I reckon the View Full Screen is pretty much okay for my purposes. I am currently invoking View Full Screen on Workbook_Activate but hitting the ESC key returns to normal view. I can already see my users hitting the ESC key for various reasons and ruining my master plan. Is there are any way to prevent unintended ESC from Full-Screen or otherwise lock in the full-screen mode until revoked intentionally by macro (shortcut)?