I have a spreadsheet that evaluates cells against eachother and if they don't match I either delete the whole row, or delete up. When I do this, I have to redo the formula as I get an error.
So I start with: =EXACT(A1,G1).... and once I delete a row or delete "up", I get =EXACT(#REF!,$G3).
I have tried =EXACT(INDIRECT(A1,G1)), =EXACT(INDIRECT($A1,$G1)), and also =EXACT($A1,$G1).
None of these work.
For example Cell A1 is 9.5 x 2.5 which gives 23.75
but what is actually displayed to users is rounded to 24
So how do I use 24 as a reference instead of 23.75?
So in Cell B1, it would be =A1x100 but the value is 2400 instead of 2375?
You can't use the ROUND function because if users decide to use 23.8 then the B1 cell needs to be 23.8x100
In the attached example, I need to create a formula for cell I2 (Balance Remaining) that is driven off the most recent calculation (in this case, F68) but still allows for additional rows to be added to the ongoing list of orders. I believe I'm supposed to use an index formula but not sure how to write/apply it? I need to be able to add rows past 68 and still have Cell I2 (Balance Remaining) continue to calculate correctly.
View 10 Replies View RelatedHave a column of cells (521 rows), on the column each cell contains a group of number
Example:
27, 539, 484, 485, 506, 594, 523, 502, 505, 525, 541, 526, 527, 529, 542, 533
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 530
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 533
Let's say I would like replace 27 to 163 but when I find and replay the "527" also changed to 5163. How can i filtered out 527 and just change the 27. I tried Match Entire Cell Content, it doesn't work.
What command do I enter so that a value in one cell is copied EXACTLY to another cell? For example, I have today's date in cell A4 and I want the exact date to be automatically copied to cell E5.
I can't seem to figure out the correct function to do this. I looked for help but there are just ways to transfer formulas over to other cells.
All those tabs have same format. Anyone know if there's a quicker way to do it? Each tab has different names. Thanks for your help.
View 9 Replies View RelatedI'm trying to find an exact match to a cell and not xlPart of it, but not sure what the syntax is, (Always where can I find a list of the properties?
Code:
Set Ran2 = Worksheets("TicketsList").Range("B8:IV200").Find(Count, lookat:=xlPart)
If Not Ran2 Is Nothing Then
CallRow = Ran.Row
CallCol = Ran.Column
End If
MsgBox "Row is " & CallRow & "Column " & CallCol
I have the following snippet of
If Cells(3, k).Value = "Actuals" Then
DesActualColumn = Cells(3, k).Column
End If
nice and simple, and works fine until it cannot find "Actuals" in the cell because someone has put a tab ahead of it, for example.
Can anyone tell me how I can use a 'LIKE' and put wildcards
I am using the form control data validation drop down list with 9 entries in the list. How can I get the entry that is selected in the drop down list to populate exactly into another cell on a separte worksheet? I have linked the drop down list to the cell, but the value is populating as a number rather than the text entry that is in the drop down.
View 7 Replies View RelatedI have the following formula in a cell that gives me a sum of items matching certain criteria.
View 3 Replies View RelatedI need to search for an exact match within a cell & i am unsure of how to go abt it. Eg ) Cell A1 contains "Emea West,Emea East,Emea". I want to search for the term "Emea" in the contents of the Cell A1. I cant use Find() as using "=FIND("Emea",A6)" returns 1 ... But i want an exact match i.e "Emea" only which in this case should be 21. The Exact() works well if Cell A1 had a single value ...I guess I would need to use some array function here which will parse through contents of the cell , but am not sure on how to go about
View 5 Replies View RelatedI am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder. Below mention is the snapshot for the same. I am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder.
A B
Style_code Picture
1
2
3
4
I went through all the forums but confused a little. In the work sheet I want Excel to find an exact word such as letter "a" in all over the work sheet (not a column name) and paste it to the destination work sheet. I am attaching an example file, can some help me to solve the problem.
View 9 Replies View RelatedI have a program that automatically exports info into excel as that info becomes available. What I need is to be able to insert into a cell the exact time that the information was inserted into excel. For example, cell A1 gets info inserted into it, I need cell B1 to automatically insert the time that the info was inserted into A1. Any time there is new info inserted into A1, B1 needs to update that corresponding time.
View 2 Replies View RelatedHow do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
How to Lock/Unlock an Excel Cell Based on the Contents of Another Cell?
View 1 Replies View Related=IF(A4='Exported Data'!B2,'Exported Data'!C2,"")
How can I lock A so when I copy over to the right the formula doesn't change that reference to B4?
Is there a way to have the True value (Exported Data'!C2) reference one cell over instead of selecting the cell to reference from?
Need code that would make cell J2 be populated with U no matter what was placed in cell J2 either manually or externally.
View 9 Replies View RelatedI can have amacro which will lock each cell where a "Y" or "N" is inserted........ eg the netire sheet is unprotected but the moment Y is inserted in C 5 the cell gets locked, next entry in D 10 has a N entry and that too upon entry get's locked
The idea being once Y or N is typed that cell can no longer be changed
Currently have a column of cells that after the data has been entered we would like the cell to lock to prevent changes. The sheet is currently protected with the cells in question unlocked (D173:D250). We would like to be able to change the data if we unprotect the sheet. We would also like to be able to add/delete cells (list) in the code as needed.
View 9 Replies View RelatedI'm trying to write a vba code that does the following....
There is a question in column A to which the user chooses yes or no from column B. Based on the response in column B, I'd like the same row column D to be formatted so that if the anser is yes, the cell is white, and unlocked. If the response is no, the cell is cleared, locked and the greyed out. (e.g. if B4 is "Yes", the format in D4 will change) So far I've come up with the following which formats the colour:
Dim response As Range
For Each response In Range("$C$10:$C$73")
If response.Value = "Yes" Then
response.Select
ActiveCell.Offset(0, 2).Range("A1").Select
With Selection.Interior
[Code] .......
How to add in a .clearcontents function, so that the contents are cleared if the response is not "yes", and also what I would need to add to unlock the cell in column D?
Is it possible to lock in the formatting that would require 12 digits even if someone was copying and pasting to the cell?
We are looking to make our users add information into cells in the format 0-00000-00000-0. They are often copy and pasting, thus overwritting the custom format we have in those cells.
I've looked at validation, but custom only works for a formula.
I have a multisheet excel workbook that I am programming. I was wondering if there is a way to lock a cell on one sheet after the initial value was put in, allowing me to change it later. This may not be so clear so here is the problem....
I have Workbook1. The input from cell A3 on Sheet1 is 5. I have made a second sheet called Order Form. In cell B5 of Order form I have made it ='Sheet1'!A3. I am looking for a way to be able to change cell A3 on Sheet1, but keep the 5 on Order Form.
I have an sheet(see attached) with some dummy data, now i want to lock (with password) only those cells depending on the dropdown (highlighted in sheet).For eg,if we select A from dropdown of col c and then locked from dropdown of col D , it should lock the complete row(s) of value A in col H and rows with value B shall remain editable.
View 14 Replies View RelatedI have a range of cells I want to become locked (thus, uneditable), based upon the value of another cell.
For example, if cell A1 is "True," (based on a drop-down, not a formula) I want cells B1:B10 to become locked. I want the user to be able to edit these cells only when A1 is false. Also, the sheet is already passsword protected.
Is there a way I can lock a set of cell to only allow 30 characters or less and if so if they copy and paste they can go over 30 characters in a cell. I can not allow they to go over 30 characters.
View 2 Replies View Relatedhow to lock a particular column having the particular value for all the sheets in a single work book thru macro code?
View 9 Replies View RelatedI am using the code below to prompt the user to enter his/her name in cell B4. What I would like to do is have it so that after the user enters his/her name, that cell is locked and cannot be cleared.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Address = "$B$4" Then
Range("B4").Value = InputBox("Please Enter " + Range("a4"), "Company")
End If
End Sub
Is it possible to lock the Cell after selecting the answer from list of that cell?
mean disable that cell from editing, deleting, and selecting another answer
