For example Cell A1 is 9.5 x 2.5 which gives 23.75
but what is actually displayed to users is rounded to 24
So how do I use 24 as a reference instead of 23.75?
So in Cell B1, it would be =A1x100 but the value is 2400 instead of 2375?
You can't use the ROUND function because if users decide to use 23.8 then the B1 cell needs to be 23.8x100
I have a spreadsheet that evaluates cells against eachother and if they don't match I either delete the whole row, or delete up. When I do this, I have to redo the formula as I get an error.
So I start with: =EXACT(A1,G1).... and once I delete a row or delete "up", I get =EXACT(#REF!,$G3).
I have tried =EXACT(INDIRECT(A1,G1)), =EXACT(INDIRECT($A1,$G1)), and also =EXACT($A1,$G1).
None of these work.
some Excel columns (see attachment). A1 is set to =C1 and the formula is dragged down, relatively referencing column C. Column B applies a formula to the values in Column A.
If I go into the formula bar for cells in A and push enter, the spreadsheet shows the correct value and I can then push enter in the adjacent Column B cell to solve. But, how can I get these data to display properly automatically?
how I can have the selected item in a dropdownlist also to be shown in another cell? Typing the cell number of the dropdownlist in another cell (f.e. ="dropdownlist cell number)" doesn't seem to do it.
View 2 Replies View RelatedI have a workbook with several sheets, but just on the sheet called “sales” I need a macro to do the following:
If F4 = CST
Then Lock down H4-S4 and AM4-AZ4
But if F4 is changed to something else I need H4-S4 and AM4-AZ4 to be unlocked
Is a password necessary for this? It is ou
I just want it to lock and unlock, not protect and unprotect.
Attached is a excel file that has a working formula for tracking cashier variances. I edited out names etc.
I added a new cell called Track Back on the employee search sheet.
What I want to do is only show variances for the amount of days back selected in the Track Back cell.
For example if I select the last 30 days, only the last 30 days would show up below in the sheet.
I am not sure if this is even possible based on the forumla that is already on the sheet. I couldn't figure out a way of doing it. But there are a lot of people on here much better with excel than me
Basically a cell might have a number with 3 decimal places
For Example 90.554, and i will format the cell two 2 decimal places. But when i use those cells which are formated to 2 decimal places in a formula it produces results based of all the decimal places in that cell.
Is there a way for the formula to only calculate the results based off of what is shown in the cell? . This is messing up our accounting area by alot of dollars since we sell many items.
I included an example of what i mean in this excel file which should clear up any confusion.
Have a column of cells (521 rows), on the column each cell contains a group of number
Example:
27, 539, 484, 485, 506, 594, 523, 502, 505, 525, 541, 526, 527, 529, 542, 533
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 530
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 533
Let's say I would like replace 27 to 163 but when I find and replay the "527" also changed to 5163. How can i filtered out 527 and just change the 27. I tried Match Entire Cell Content, it doesn't work.
What command do I enter so that a value in one cell is copied EXACTLY to another cell? For example, I have today's date in cell A4 and I want the exact date to be automatically copied to cell E5.
I can't seem to figure out the correct function to do this. I looked for help but there are just ways to transfer formulas over to other cells.
All those tabs have same format. Anyone know if there's a quicker way to do it? Each tab has different names. Thanks for your help.
View 9 Replies View RelatedI'm trying to find an exact match to a cell and not xlPart of it, but not sure what the syntax is, (Always where can I find a list of the properties?
Code:
Set Ran2 = Worksheets("TicketsList").Range("B8:IV200").Find(Count, lookat:=xlPart)
If Not Ran2 Is Nothing Then
CallRow = Ran.Row
CallCol = Ran.Column
End If
MsgBox "Row is " & CallRow & "Column " & CallCol
I have the following snippet of
If Cells(3, k).Value = "Actuals" Then
DesActualColumn = Cells(3, k).Column
End If
nice and simple, and works fine until it cannot find "Actuals" in the cell because someone has put a tab ahead of it, for example.
Can anyone tell me how I can use a 'LIKE' and put wildcards
I am using the form control data validation drop down list with 9 entries in the list. How can I get the entry that is selected in the drop down list to populate exactly into another cell on a separte worksheet? I have linked the drop down list to the cell, but the value is populating as a number rather than the text entry that is in the drop down.
View 7 Replies View RelatedI have the following formula in a cell that gives me a sum of items matching certain criteria.
View 3 Replies View RelatedI need to search for an exact match within a cell & i am unsure of how to go abt it. Eg ) Cell A1 contains "Emea West,Emea East,Emea". I want to search for the term "Emea" in the contents of the Cell A1. I cant use Find() as using "=FIND("Emea",A6)" returns 1 ... But i want an exact match i.e "Emea" only which in this case should be 21. The Exact() works well if Cell A1 had a single value ...I guess I would need to use some array function here which will parse through contents of the cell , but am not sure on how to go about
View 5 Replies View RelatedI am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder. Below mention is the snapshot for the same. I am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder.
A B
Style_code Picture
1
2
3
4
I went through all the forums but confused a little. In the work sheet I want Excel to find an exact word such as letter "a" in all over the work sheet (not a column name) and paste it to the destination work sheet. I am attaching an example file, can some help me to solve the problem.
View 9 Replies View RelatedI have a program that automatically exports info into excel as that info becomes available. What I need is to be able to insert into a cell the exact time that the information was inserted into excel. For example, cell A1 gets info inserted into it, I need cell B1 to automatically insert the time that the info was inserted into A1. Any time there is new info inserted into A1, B1 needs to update that corresponding time.
View 2 Replies View RelatedI have a lookup that gives and RGB colour code in Cell A1; for example 186, 206, 140.
I'd then like Cells R10:V15 to fill with the RGB colour based on the result in A1.
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:
View 2 Replies View RelatedI have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies View RelatedI have a value showing up as #####. When I auotfill the cell to the next on the right, it shows the right value. How do I correct this so it just shows the right value in the first cell?
View 10 Replies View Relatedi type into any cell in row 1 i need the time at that moment to be captured and shown in cell "B". When i type into row 2, the time which i entered the data must be captured into row 2 cell "B".
View 5 Replies View RelatedColumns O,P and Q should show a "Y" if Column N has the percentage (the percentages shown at the top of those three columns) over the value in column D. I hope this makes sense!
******** ******************** ************************************************************************>Microsoft Excel - Team Lead Incentive.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF3H3N3F4H4N4=
CDEFGHIJKLMNOPQ1***WF*Team*Lead*Incentive****As*of*4/5/07***(15%)(20%)(25%)2TeamBase*Team*****Hours******Wk*1Wk1*%Wk*2Wk2*%Wk*3Wk3*%Wk*4Wk4*%*Total$75*$100*$125*32600.25*592.00-1.37%623.753.92%*****2.54%***43388.00*467.5020.49%527.5035.95%*****56.44%***WF*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have the word 'calculate' shown in the bottom grey bar of the screen. I think this may be affecting my Excel spreadsheet.
View 4 Replies View RelatedHow do I programmatically freeze ( lock?) an autoshape so that it stays put even when the user scrolls up/or down?
FYI: I created an autoshape and assigned it a macro, thus it becomes a software button, I want the button to stay put.