What command do I enter so that a value in one cell is copied EXACTLY to another cell? For example, I have today's date in cell A4 and I want the exact date to be automatically copied to cell E5.
I can't seem to figure out the correct function to do this. I looked for help but there are just ways to transfer formulas over to other cells.
I went through all the forums but confused a little. In the work sheet I want Excel to find an exact word such as letter "a" in all over the work sheet (not a column name) and paste it to the destination work sheet. I am attaching an example file, can some help me to solve the problem.
View 9 Replies View RelatedI have a file and i want to make an exact copy with only values and the layout.
I can do copy paste each sheet in the new file one by one. with first the values and then the layout.
But the file has lot of sheets so it would be great to find a faster way then do it one by one.
Have a column of cells (521 rows), on the column each cell contains a group of number
Example:
27, 539, 484, 485, 506, 594, 523, 502, 505, 525, 541, 526, 527, 529, 542, 533
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 530
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 533
Let's say I would like replace 27 to 163 but when I find and replay the "527" also changed to 5163. How can i filtered out 527 and just change the 27. I tried Match Entire Cell Content, it doesn't work.
All those tabs have same format. Anyone know if there's a quicker way to do it? Each tab has different names. Thanks for your help.
View 9 Replies View RelatedFor example Cell A1 is 9.5 x 2.5 which gives 23.75
but what is actually displayed to users is rounded to 24
So how do I use 24 as a reference instead of 23.75?
So in Cell B1, it would be =A1x100 but the value is 2400 instead of 2375?
You can't use the ROUND function because if users decide to use 23.8 then the B1 cell needs to be 23.8x100
I'm trying to find an exact match to a cell and not xlPart of it, but not sure what the syntax is, (Always where can I find a list of the properties?
Code:
Set Ran2 = Worksheets("TicketsList").Range("B8:IV200").Find(Count, lookat:=xlPart)
If Not Ran2 Is Nothing Then
CallRow = Ran.Row
CallCol = Ran.Column
End If
MsgBox "Row is " & CallRow & "Column " & CallCol
I have a spreadsheet that evaluates cells against eachother and if they don't match I either delete the whole row, or delete up. When I do this, I have to redo the formula as I get an error.
So I start with: =EXACT(A1,G1).... and once I delete a row or delete "up", I get =EXACT(#REF!,$G3).
I have tried =EXACT(INDIRECT(A1,G1)), =EXACT(INDIRECT($A1,$G1)), and also =EXACT($A1,$G1).
None of these work.
I have the following snippet of
If Cells(3, k).Value = "Actuals" Then
DesActualColumn = Cells(3, k).Column
End If
nice and simple, and works fine until it cannot find "Actuals" in the cell because someone has put a tab ahead of it, for example.
Can anyone tell me how I can use a 'LIKE' and put wildcards
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
I am using the form control data validation drop down list with 9 entries in the list. How can I get the entry that is selected in the drop down list to populate exactly into another cell on a separte worksheet? I have linked the drop down list to the cell, but the value is populating as a number rather than the text entry that is in the drop down.
View 7 Replies View RelatedI have the following formula in a cell that gives me a sum of items matching certain criteria.
View 3 Replies View RelatedI need to search for an exact match within a cell & i am unsure of how to go abt it. Eg ) Cell A1 contains "Emea West,Emea East,Emea". I want to search for the term "Emea" in the contents of the Cell A1. I cant use Find() as using "=FIND("Emea",A6)" returns 1 ... But i want an exact match i.e "Emea" only which in this case should be 21. The Exact() works well if Cell A1 had a single value ...I guess I would need to use some array function here which will parse through contents of the cell , but am not sure on how to go about
View 5 Replies View RelatedI am very new withe macro I recieve every day a CSV file from our supplier withe a list of the products that got updated withe new price, stock count, product ID etc.
I have my own worksheet with the product ID that we use, and I want to finde the exact match to my product ID in that CSV file and delete all other that don't match.
But i need them get deletede by rows thos product ID that dosen't match to my workbook.
I tried with this, so it could set an X in front of my match then i could filter and copy it to my workbook but it dosen't work:
Because the same product ID is sometime in 100 rows and the X come only in front of one of them.
=IF(ISNA(MATCH(Q2:Q1000;G$2:G$1000;0));"";"X")
so with some macro. I need to have every row deleted that don't match to my list of product ID.
I am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder. Below mention is the snapshot for the same. I am having a product style code in Column A2:A301 from 1 to 300, and I want get picture in next cell ie column B2:B301 based on cell value A2 from a selected folder.
A B
Style_code Picture
1
2
3
4
I have a program that automatically exports info into excel as that info becomes available. What I need is to be able to insert into a cell the exact time that the information was inserted into excel. For example, cell A1 gets info inserted into it, I need cell B1 to automatically insert the time that the info was inserted into A1. Any time there is new info inserted into A1, B1 needs to update that corresponding time.
View 2 Replies View RelatedI am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
I am trying to compare two columns (store names) to verify if a store purchased a certain product. column a is all our stores and column c are the stores that got the product. the formula i am using is: =OR(EXACT(A2,C2:C93)) in column B and it returns a true or false value. However, when I copy the formula down column B, not only does the A value change, but so do the C values. How do I keep the c2:c93 portion of the function the changing, while the a2 goes to a3, a4, a5 etc.?
View 8 Replies View RelatedSo, it is for a hotel, I need to know to know between a Check-in and a check-out date, each day (monday, saturday) there is. In depending it is for one night or 12.. I will try to be clear: Depending on the channel of booking and the day of week we have a % of commission different. so I want to put the price in one cell and it is calculate for each date in order at the end I have the right net profit (because the right commission has been applied). Of course to complicate the commissions do not apply in the same order depending the channel and there are fixed costs which are count one time or repeat by the amount of nights. For the these things what i did seems work.
After, my boss would like to link the dates with another excel file which say for each date which "level of price" (price point) is applied and function of this Price Point we have the price applied per room type and offer
But for now, I didn't find anything what can say to me between 2 dates what dates are between...
I have percentages in Column "A" & Names in "B".
There are duplicate percentages and i need have the Names in between the percentages for 90% - 99%. Here i am using Vlook up function in Column "H" and i am getting error. This will only takes the first Name but i need all other Names for these percentages.
Hereby I am attaching the sample sheet : Lookup Values.xlsx
My date of birth is 09/08/1970.I want to know that as on today,which years,months and days I have passed?
View 3 Replies View RelatedI am using the above code to find and remove data, at present the code does not find the exact match.
For instance if someone enters as it will remove any entry with as in it.
I want it to only remove specific data, so if someone types in as, and as is not in the list to look through I wan't them to recieve a message telling them to check spelling and enter exact value of data to be removed.
IE (enter Blauv to remove Blauv, Not BL and remove Blauv, Black, Blue)
The find method has a lookat arguement which you can define as xlwhole or xlpart, by default it is set to xlpart.
If you have a cell containing Blauv
.find("Bl") will find it, .find("Bl", lookat:=xlwhole) will not.
I have one condition which needs to be matched. This code I wrote can find the first instance and then offset data to another worksheet accordingly.
My question is whether than can be done for every other instance that appears on my sourcesheet 'Invoicing'. I have considered putting a loop in, but this will only find the first instance over and over again which is pointless.
i have a set of words in sheet1 column A, in sheet2 columnA, i copied the words and type the meaning on columnB. in sheet1, i have a command button adjacent to the word in columnA, when i click that button, it will go to sheet2 with the same word beside the button in sheet1 columnA, so that the user may see the meaning of the word in sheet2. is it possible to generate a code like that?
View 9 Replies View RelatedIs it possible to use HLOOKUP without exact matches. e.g. < =HLOOKUP(E1,Actuals,2) > where E1 is "2009 October" and the lookup value in named range "Actuals" would be simply "Oct".
View 4 Replies View RelatedIn one sheet I have customer_code in one sheet (Customer_code) and this is multiple like
C00002604,C00002604,C00002604 and in another sheet (Customer_code_details)
I have the same code but here the count us much more than earlier sheet (Customer_code). if Customer code exists the same code 3 times the same code exists also in sheet (Customer_code_details) for 5 times.
In customer_code sheet I have 8724 data but Customer_code_details sheet I have 8840 data.
I am normally sorted the two columns and checking t manually.
Is there any way to do vlookup with count?
I have a series of numbers in cells A1 to A5, e.g: 5,15,19,3,105 now my target value is 23. Is this possible that we can come to know which values we can sum to get our target value. in this case cells sum of A1,A2,A4 is 23 which is my target value.
in the same way i will set other target value , it should show which are the number which should be summed to get my target value.
I have written a basic search which pastes the results on to another sheet.It works, but i have a small issue with it.If I search for "A" it will give me all the results for "A" but it will also give me any result with a combination with "A" in it, eg. BA or BBA etc I need to have results based on the exact search. What do I need to do to make my search result and exact result?
This is currently what i have
Sub Rating()
'
' Rating Macro
'
Dim Wrd As String[code]......
I am writing a macro that will take data from a series of objects and then filter 3 columns according to their attributes.
EX.
Object 1 Example1 20140306 10
This combination of values is unique so is used to grab the value in the third column after the filter has ran.
My issue is that in the second column the actual values are 50201403069999 and they change per value although they represent the same date "20140306" so manually I can type in "20140306" and the filter will show the results however it seems the macro requests the exact which I can't provide as this the superfluous numbers change.
Is there a way to make it the auto filter search the value??
My second issue is how to extract the value sought once found. Since this cell will be different each time, what is the best way of selecting would it be C3 select then down?
Here is my current code:
Code:
Sub IMPORTPRICES()
Dim i As Integer
For Each Ativo In Sheet4.Range("A2:A6")
[Code].....
I need formula to change the the date to number of months. Example : May or 1-5-2014 to be changed to days like this = 31.
View 4 Replies View Related