I went through all the forums but confused a little. In the work sheet I want Excel to find an exact word such as letter "a" in all over the work sheet (not a column name) and paste it to the destination work sheet. I am attaching an example file, can some help me to solve the problem.
View 9 RepliesI have a list of names in column A1:A20 and have a number im trying to match within cell A22.,
The data with all the values in is B1:K20.
what im trying to do is find the exact number (somewhere within the B1:K20 field) and then tell me what the corresponding name is in Column A1:20.
Ive tried match, vlookup, array, all with no success. i can match it 1 row at a time but cant get it to work when there is more than 1 column to look in.
I am having a slight VBA issue I need a little help with. I have created a catalog of books in Column A. As each new letter is reached there is a new heading. For example:
Cell A1 : A
Cell A2 : Book beginning with A #1
Cell A2 : Book beginning with A #2
Cell A3 : Book beginning with A #3
Cell A4: B
Cell A5 : Book beginning with B #1
Cell A6 : Book beginning with B #2
Cell A7 : Book beginning with B #3
Cell A8 : C
etc.
What I am looking to do is create a macro for each letter so that if I went to the "B" macro it would make the active cell A4. However the list of books will grow as my library does, so the macros have to find the letter rather than go to a predefined cell.
The code I have so far is (this example is for the letter B):
Sub B()
Columns("A:A").Select
Selection.Find(What:="B", After:=ActiveCell, _
LookIn:=xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False, _
SearchFormat:=False).Activate
ActiveCell.Select
End Sub
However this code finds the first time the letter B is used in a word, not the cell that only has the letter B in it. Also I need to make sure that if the active cell when the macro is run is below the letter that it needs to find that it will still find it. I'm not sure if my current code would do that or not.
My worksheet has two sheets which has daily continued data. I want to copy two entire columns E and F from Sheet 1 and then in Sheet 2 I want to find a particular word "80 Percent" and then insert two new Entire columns before that word. And after that I want to paste that copied columns of sheet1 in those newly created columns of sheet 2. Is it really possible because the cell reference of the word "80 Percent" in Sheet 2 will change daily. How to create the macro codes for this.
Find attached file : IRCS1.xlsx
Looking to find 1 of 2 words in a cell in column B and return the word found in the same row in column E. This seemed easy but I am not having any luck.
the cells in column B have several words in them but I am looking for 2 specific words "PLAT" and "ORIG". If the word is not in the cell, it should show a blank cell in column E in the same row, otherwise one of the 2 words should be in that row in column E. A VBA loop would be ideal but a formula that can do it might work as well.
I need a formula to check sheet 1 column N and to copy the entire row if the cell in column has the word NO.
The row has to be extract in sheet 3.
I would like to have a formula find a specific word in column L and return the sum from column E for the same fund from column C.
I tried using =SUMIF(L:L,"*annual*",E:E) but that gives me the sum of annual for the entire column. I need to be able to specify the fund.
word "annual" also appears in "semi annual" so I need to be able to separate the two.
I'm trying to find an exact match to a cell and not xlPart of it, but not sure what the syntax is, (Always where can I find a list of the properties?
Code:
Set Ran2 = Worksheets("TicketsList").Range("B8:IV200").Find(Count, lookat:=xlPart)
If Not Ran2 Is Nothing Then
CallRow = Ran.Row
CallCol = Ran.Column
End If
MsgBox "Row is " & CallRow & "Column " & CallCol
I want to say if the word 'suitcase' is in column W (any row), place the word 'suitcase' in column Z, same row.
View 2 Replies View RelatedWhat command do I enter so that a value in one cell is copied EXACTLY to another cell? For example, I have today's date in cell A4 and I want the exact date to be automatically copied to cell E5.
I can't seem to figure out the correct function to do this. I looked for help but there are just ways to transfer formulas over to other cells.
i have a set of words in sheet1 column A, in sheet2 columnA, i copied the words and type the meaning on columnB. in sheet1, i have a command button adjacent to the word in columnA, when i click that button, it will go to sheet2 with the same word beside the button in sheet1 columnA, so that the user may see the meaning of the word in sheet2. is it possible to generate a code like that?
View 9 Replies View RelatedI am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
I have a userform for the user to use a search engine on what he needs. The following code I have written it, but it is only good if he writes exact wording of the document name. How can I twist the code to make the search look for approximate words,
The search engine will try to look in for all the titles on "Result" worksheet and copy/past it to a new sheet called "search". so when the user types in the userform "specification" for instance, it will look all titles (Specifications, specification, spec, brown color spec) that has this word in the "Result" sheet and then it will copy/paste it in the Search Sheet.
Code:
Private Sub ok_1_Click()
Dim sht As Worksheet
Set sht = Worksheets("Result")
'if no name selected
If Trim(Me.Document_box.Value) = "" Then
MsgBox "Please write a document name."
[Code] ......
I already have this code written but it looks for all words that contain my desired word. i.e selecting "innovation" while looking for "ovation"....
View 9 Replies View RelatedI am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies View RelatedI am writing a program which would look for look for the word " TOTAL" in sheet1 and then assign several values in sheet 2 based on cells offset of address of "TOTAL". This is repeated and down rows of sheet 2. Everything works except that it is giving repeating the first "TOTAL" address; i.e. it doesn't seem to go to the next met criterion.
Sheets("Summary").Range("A1").FormulaR1C1 = "=COUNTIF(Sheet1!C,""TOTAL"")" ....
Basically this is what I want to do:
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1
2. Copy the entire row containing the non-blank values
3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
In Column A4 I have the word Date and in Columns A5 to A844 are different dates
In Column B4 I have the word Destination and in Columns B5 to B844 are different Destinations
In Column C4 I have the word Time and in Columns C5 to C844 are different times.
How can I find out how many times the word Incoming is in Column B.
How many of the dates in Column A are weekend dates.
How many times in Column C was after 9:00pm but before 6:00am.
I have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 Replies View RelatedI am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
I'm using the below VBA
Dim c, DataRow
With Data
Set c = . Range("A5:A350"). Find(KPI, LookIn:=xlValues)
If Not c Is Nothing Then
DataRow = c.Row
End If
End With
Now,If KPI is for example = "Favourite Hotel" and if i have data that looks like :
Favourite Hotel - London
Favourite Hotel - Cardiff
Favourite Hotel
Favourite Hotel - Birmingham
Then it seems to not look be looking for an exact match (e.g. Favourite Hotel) and rather is finding the first item in the list that contains the KPI string (E.g. Favourite Hotel - London).
How do i make it search for an exact match?
On the data sheet I attached you can see easily what I am trying to do:
The macro should do something like this basically:
Column A there is a entry like "L110E (CST_PRG-Wheel Loaders-E series models)"
Lets say we have 10.000 entries more or less like this.
Macro should do this:
* Take first word for example in this case "L110E" and copy into column D same row.
* Take second word's second part in this case only "PRG" and copy into column B same row.
* Take the 3rd word between - - in this case only "Wheel Loaders" and copy into column C.
I have a single work book with 8 sheets (I am using Excel 2010 BTW) and I am trying to find a total of times a word appears across all the sheets in column "C"
I found this formula on another thread. =SUM(COUNTIF(INDIRECT("Sheet"&{1,2,3}&"!C1:C1000"),"="&H3)) with an example. I made the changes that I needed for my purposes
This worked but only after I renamed the sheets to Sheet1, Sheet2, etc.
Is there a way get the same results from the above formula if all the sheets are named after our reps? Example: sheet1 is named Dan, Sheet2 is Nick, etc?
I am new to VBA and have tried to develop the code for finding a specific stock symbol (Column A) from over 4200 symbols from a downloaded csv file, copy the data in in its (specific symbol's) row (in the next 5 columns B to F) to the 3rd blank row in the master workbook (data arranged from Bottom to Top). In the Master workbook each stock symbol has a worksheet with its symbol as the tab e.g. BHP.AX is the tab or sheetname for BHP stock in the Australian Stock Exchange. The downloaded file comes from a subscribed site EODData which provides daily OHLCV (Open/High/Low/Close/Volume) data against each symbol.
My attempt is shown below and it is very primitive. It does not work! I wish to run it from the Master workbook (name:-0PortfolioASXMultipleIB.xlsm) and not from Csv Data file.
VB:
Sub Macro0CopyFromCSV()
'Insert a blank row and format it in Master workbook
Rows("3:3").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ......
I have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed".
If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.
Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.
I need a vba code that will find all the columns (j) which there cell(1,j) includes the word "Date". the word "date" will be a part of a title, for exmple: "due date", "starting date"
View 4 Replies View RelatedI am using the above code to find and remove data, at present the code does not find the exact match.
For instance if someone enters as it will remove any entry with as in it.
I want it to only remove specific data, so if someone types in as, and as is not in the list to look through I wan't them to recieve a message telling them to check spelling and enter exact value of data to be removed.
IE (enter Blauv to remove Blauv, Not BL and remove Blauv, Black, Blue)
The find method has a lookat arguement which you can define as xlwhole or xlpart, by default it is set to xlpart.
If you have a cell containing Blauv
.find("Bl") will find it, .find("Bl", lookat:=xlwhole) will not.
I have a series of numbers in cells A1 to A5, e.g: 5,15,19,3,105 now my target value is 23. Is this possible that we can come to know which values we can sum to get our target value. in this case cells sum of A1,A2,A4 is 23 which is my target value.
in the same way i will set other target value , it should show which are the number which should be summed to get my target value.
Have problems using find and the Dictionary
What Im trying to do is find a certain word in a string then return the number associated with that word